1958 GMC FM350 Belts and Hoses
Find Your Specific 1958 GMC FM350 Belts and Hoses
Below you will find various in-demand GMC Belts and Hoses, components and accessories for your 1958 FM350. Advance Auto Parts has popular FM350 parts like Serpentine and V Belts and more. You’ll also find aftermarket and OEM Belts and Hoses for other FM350 model years including
1955,
1956,
1957,
1959 and more. Select a category of 1958 GMC FM350 Belts and Hoses below and start saving instantly.
Popular 1958 GMC FM350 Belts and Hoses Categories
Essential Belts and Hoses for 1958 GMC FM350s
Gates – Tri-Power« Classical Section Molded Notch V-Belt (Part No.BX65)
from
$37.99
Product Features:
See More
- Belt edge is machined for even pulley groove contact, resulting in less slippage and wear for smoother running
- Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
- Cross-oriented, fiber-loaded rubber compound for flexibility and stability
- Notches molded into the belt during manufacturing make this belt well suited for drives with smaller diameter pulleys
- Meets RMA oil and heat resistant standards and static conductivity requirements
- Temperature Range: -58 Deg. F to +248 Deg. F (-50 Deg. C to +120 Deg. C)
- Note: Available in AX, BX, and CX cross-sections as well as Tri-Power PowerBand joined V-belts
Gates – Automotive XL« High Capacity V-Belt (Part No.7640)
from
$42.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Gates – Automotive XL« High Capacity V-Belt (Part No.9720)
from
$49.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9720HD)
from
$67.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at extremely prolonged operating temperatures
- Heavy-duty construction resists cracking, wear, oil and heat
- Special compound provides unmatched stability, load carrying capacity and belt life
- Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
- Problem solver for troubled drives
- Engineered to save your fleet money and reduce downtime
- Meets RMA oil and heat resistant standards and static conductivity requirements
Gates – Automotive XL« High Capacity V-Belt (Part No.7508)
from
$30.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Upgrade your 1958 GMC FM350 with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1958 GMC FM350, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Belts and Hoses are key to keeping your FM350 functioning at its best. At Advance Auto Parts, we offer a wide selection of 2 Belts and Hoses for the 1958 GMC FM350, designed to meet your needs without breaking the bank.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1958 GMC FM350 at great prices.
Our Belts and Hoses inventory for this model
ranges from just $37.99 to $42.49, with
an average price of $40.24.
Our 2 Belts and Hoses in stock come from trusted brands, so you’re sure to find the right part for your 1958 GMC FM350 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1958 GMC FM350 is always ready to roll. We’re committed to providing you with everything you need to keep your FM350 in top shape, all in one place.
Start shopping confidently below for your 1958 GMC FM350!
Best-Selling Serpentine and V Belts for 1958 GMC FM350s
Enhance the driving experience in your GMC with 2 quality Serpentine and V Belt components, starting at $37.99.
Gates – Automotive XL« High Capacity V-Belt (Part No.7640)
from
$42.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Gates – Tri-Power« Classical Section Molded Notch V-Belt (Part No.BX65)
from
$37.99
Product Features:
See More
- Belt edge is machined for even pulley groove contact, resulting in less slippage and wear for smoother running
- Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
- Cross-oriented, fiber-loaded rubber compound for flexibility and stability
- Notches molded into the belt during manufacturing make this belt well suited for drives with smaller diameter pulleys
- Meets RMA oil and heat resistant standards and static conductivity requirements
- Temperature Range: -58 Deg. F to +248 Deg. F (-50 Deg. C to +120 Deg. C)
- Note: Available in AX, BX, and CX cross-sections as well as Tri-Power PowerBand joined V-belts
FAQs for 1958 GMC FM350 Belts and Hoses
Which Belts and Hoses are best-sellers for 1958 GMC FM350s?
Out of 2 Belts and Hoses that fit 1958 GMC FM350s, the following parts are the top sellers:
- Automotive XL« High Capacity V-Belt (10498561) – $42.49
- Tri-Power« Classical Section Molded Notch V-Belt (12144172) – $37.99
What’s the price range for 1958 GMC FM350 Belts and Hoses?
Belts and Hose prices for the 1958 GMC FM350 start at $37.99 and go up to $42.49 for the most premium parts.
What’s the average price of a Belts and Hose for a 1958 GMC FM350?
The average price for Belts and Hoses for the 1958 GMC FM350 is $40.24. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other GMC FM350 model years?
What are the cheapest Belts and Hoses for my 1958 GMC FM350?
The cheapest 1958 GMC FM350 Belts and Hoses we carry in stock are:
- Tri-Power« Classical Section Molded Notch V-Belt (12144172) – $37.99
- Automotive XL« High Capacity V-Belt (10498561) – $42.49
What types of Belts and Hoses do you sell for my 1958 GMC FM350?
As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1958 GMC FM350:
Can I get help with 1958 GMC FM350 Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Belts and Hoses and more.
What is your return policy for GMC FM350 Belts and Hoses?
Advance Auto Parts keeps returns simple. For new GMC FM350 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
