1958 GMC 100 Air Intakes
Find Your Specific 1958 GMC 100 Air Intakes
Below you will find various in-demand GMC Air Intakes, components and accessories for your 1958 100. Advance Auto Parts has popular 100 parts like Air Cleaner Parts, Intake Manifold Parts, Carburetor Parts and more. You’ll also find aftermarket and OEM Air Intakes for other 100 model years including
1951,
1952,
1953,
1954,
1955,
1956,
1957,
1959 and more. Select a category of 1958 GMC 100 Air Intakes below and start saving instantly.
Popular 1958 GMC 100 Air Intakes Categories
Essential Air Intakes for 1958 GMC 100s
Victor Reinz – Victor Reinz Air Cleaner Mounting Gasket, 71-13854-00 (Part No.71-13854-00)
from
$3.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
See More
Edelbrock – Edelbrock Carburetor Progressive Throttle Linkage Kit, 1033 (Part No.1033)
from
$196.99
Be sure to always check that the arms will not become inverted after any adjustment. Some trial and error will be required to achieve a properly balanced set up.
See More
Holley – Holley Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet, 0-4412HBX (Part No.0-4412HBX)
from
$921.99
Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!
See More
Holley – Holley Street Carburetor: 500 CFM, Electric Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny, 0-80500 (Part No.0-80500)
from
$599.99
“Street Avenger carburetors are known to bolt on right out of the box and Holley is excited to announce the addition of our new 2bbl Street Avenger models available in 350 and 500 CFM. Street Avenger carburetors have great features such as optimized street calibrations; three vacuum ports for all necessary vacuum accessories; factory preset electric choke for easy startups; built-in fuel filters; and an included 3/8″” fuel line connection so there are no unnecessary trips back to the parts store.”
See More
Holley – Holley 2 BBL Carbs, 0-4412CT (Part No.0-4412CT)
from
$665.99
The 0-4412C is easily the winningest two barrel carburetor on the market, used for decades in circle track racing around the world. This new 500cfm 0-4412CT carburetor shares the hugely successful features of the original, but with changes aimed directly at circle track cars. The choke assembly has been removed for unobstructed airflow, plus it has been specially calibrated for circle track racing use. It comes out of the box ready to run with less modifying and less tuning at the track!
See More
Holley – Holley Street Avenger Carburetor, 0-80350 (Part No.0-80350)
from
$599.99
“Street Avenger carburetors are known to bolt on right out of the box. The 350 CFM Street Avenger carburetor has great features such as optimized street calibrations, two vacuum ports for all necessary vacuum accessories, factory preset electric choke for easy startups, built-in fuel filters, and an included 3/8″” fuel line connection so there are no unnecessary trips back to the parts store.”
See More
Felpro – Felpro Carburetor Mounting Gasket, 9093 (Part No.9093)
from
$3.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
ARP Auto Racing – "ARP Auto Racing For Use With Chevy 265/ 400 Cubic"", 12 Point Head Type, Polished, With Washers, 434-2101" (Part No.434-2101)
from
$60.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
See More
Felpro – Felpro Engine Intake Manifold Gasket Set, MS 9257 SH (Part No.MS 9257 SH)
from
$22.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More
Felpro – Felpro Engine Intake Manifold Gasket Set, MS 9498 SH-1 (Part No.MS 9498 SH-1)
from
$24.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More
Felpro – Felpro Engine Intake Manifold Gasket Set, MS 9334 SH (Part No.MS 9334 SH)
from
$24.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More
Edelbrock – Edelbrock Performer RPM Small Block Chevy Intake Manifold, 7101 (Part No.7101)
Holley – Holley Intake Manifolds, 825124 (Part No.825124)
from
$971.99
Holley Intake Manifolds, 825124. PERFORMANCE PARTS>PERFORMANCE DRESS UP>DRESS UP COMPONENTS>AIR CLEANER ASSEMBILIES from Holley
See More
Holley – Holley Intake Manifolds, 825012 (Part No.825012)
from
$771.99
Holley Intake Manifolds, 825012. PERFORMANCE PARTS>PERFORMANCE DRESS UP>DRESS UP COMPONENTS>AIR CLEANER ASSEMBILIES from Holley
See More
Holley – Holley Single Plane Intake Manifold- Chevy Small Block V8, 300-261 (Part No.300-261)
from
$449.99
The 300-261 intake manifolds are designed for square-bore carburetor applications on 1957-86 262-400cid Small Block Chevrolet engines and SBC engines equipped with 1987-91 L98 aluminum Corvette cylinder heads (non-EGR applications). Also, these manifolds will work with any SBC engine equipped with aftermarket cylinder heads, as long as they have a standard port flange opening and mounting bolt locations.
See More
Edelbrock – Edelbrock Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy, 2703 (Part No.2703)
from
$339.99
Edelbrock Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy, 2703.
See More
Edelbrock – Edelbrock Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, 2601 (Part No.2601)
from
$395.99
Edelbrock Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, 2601.
See More
Edelbrock – Edelbrock Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish, 26011 (Part No.26011)
from
$708.99
Edelbrock Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish, 26011.
See More
Edelbrock – Edelbrock Performer EPS Manifold with Oil Fill Tube for Small-Block Chevy, Polished Finish, 27031 (Part No.27031)
from
$645.99
“Edelbrock part No. 27031 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. This Performer EPS intake manifold combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as No. 4803. This intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that’s “”tuned”” for peak torque at 3500 rpm on a 350-inch engine and it’s ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft.-lbs. of torque over the Edelbrock Performer intake manifold No. 21011 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft.-lbs. of torque for more performance where you need it most. This manifold offers a polished finish for a brilliant shine and classic look.”
See More
Edelbrock – Edelbrock EGR Valve Adapter, 1476 (Part No.1476)
from
$88.99
Edelbrock EGR Adapter No: 1476 has made installing your new intake and carburetor easier when using part No: 3701 and No: 3706. When using Edelbrock EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They’re made of cast aluminum and come complete with gaskets and bolts.
See More
Upgrade your 1958 GMC 100 with Top-Quality Air Intakes
When it comes to maintaining or upgrading your 1958 GMC 100, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Air Intakes are key to keeping your 100 functioning at its best. At Advance Auto Parts, we offer a wide selection of 21 Air Intakes for the 1958 GMC 100, designed to meet your needs without breaking the bank.
From
Air Cleaner Part
replacements to
Intake Manifold Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 1958 GMC 100 at great prices.
Our Air Intakes inventory for this model
ranges from just $3.49 to $971.99, with
an average price of $485.94.
Our 21 Air Intakes in stock come from 5 trusted brands, so you’re sure to find the right part for your 1958 GMC 100 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1958 GMC 100, we stock popular OEM and aftermarket Air Intakes from top names
like Edelbrock, and more.
Edelbrock Air Intakes
start at just $395.99 and boast an impressive 4.4 stars average rating from customers.
With 2 customer reviews and counting, our 1958 GMC 100 Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1958 GMC 100 is always ready to roll. We’re committed to providing you with everything you need to keep your 100 in top shape, all in one place.
Start shopping confidently below for your 1958 GMC 100!
Best-Selling Air Cleaner Parts for 1958 GMC 100s
Enhance the driving experience in your GMC with 1 quality Air Cleaner Part components, starting at $3.49.
Victor Reinz – Victor Reinz Air Cleaner Mounting Gasket, 71-13854-00 (Part No.71-13854-00)
from
$3.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
See More
Most Popular 1958 GMC 100 Intake Manifold Parts
Customize your GMC with 13 Intake Manifold Parts products
like Intake Manifold Gasket Sets,
Intake Manifolds, and
Intake Manifold Bolt Sets, all
priced under $971.99.
Edelbrock – Edelbrock Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, 2601 (Part No.2601)
from
$395.99
Edelbrock Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, 2601.
See More
Edelbrock – Edelbrock Performer RPM Small Block Chevy Intake Manifold, 7101 (Part No.7101)
Edelbrock – Edelbrock Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy, 2703 (Part No.2703)
from
$339.99
Edelbrock Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy, 2703.
See More
ARP Auto Racing – "ARP Auto Racing For Use With Chevy 265/ 400 Cubic"", 12 Point Head Type, Polished, With Washers, 434-2101" (Part No.434-2101)
from
$60.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
See More
Felpro – Felpro Engine Intake Manifold Gasket Set, MS 9498 SH-1 (Part No.MS 9498 SH-1)
from
$24.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More
Holley – Holley Intake Manifolds, 825124 (Part No.825124)
from
$971.99
Holley Intake Manifolds, 825124. PERFORMANCE PARTS>PERFORMANCE DRESS UP>DRESS UP COMPONENTS>AIR CLEANER ASSEMBILIES from Holley
See More
Holley – Holley Intake Manifolds, 825131 (Part No.825131)
from
$797.99
Holley Intake Manifolds, 825131. PERFORMANCE PARTS>PERFORMANCE DRESS UP>DRESS UP COMPONENTS>AIR CLEANER ASSEMBILIES from Holley
See More
Holley – Holley Intake Manifolds, 825012 (Part No.825012)
from
$771.99
Holley Intake Manifolds, 825012. PERFORMANCE PARTS>PERFORMANCE DRESS UP>DRESS UP COMPONENTS>AIR CLEANER ASSEMBILIES from Holley
See More
Edelbrock – Edelbrock Performer RPM AIR-Gap Small Block Chevy Polished Intake Manifold, 75011 (Part No.75011)
from
$749.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.
See More
Edelbrock – Edelbrock Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish, 26011 (Part No.26011)
from
$708.99
Edelbrock Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish, 26011.
See More
Edelbrock – Edelbrock Performer EPS Manifold with Oil Fill Tube for Small-Block Chevy, Polished Finish, 27031 (Part No.27031)
from
$645.99
“Edelbrock part No. 27031 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. This Performer EPS intake manifold combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as No. 4803. This intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that’s “”tuned”” for peak torque at 3500 rpm on a 350-inch engine and it’s ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft.-lbs. of torque over the Edelbrock Performer intake manifold No. 21011 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft.-lbs. of torque for more performance where you need it most. This manifold offers a polished finish for a brilliant shine and classic look.”
See More
Holley – Holley Single Plane Intake Manifold- Chevy Small Block V8, 300-261 (Part No.300-261)
from
$449.99
The 300-261 intake manifolds are designed for square-bore carburetor applications on 1957-86 262-400cid Small Block Chevrolet engines and SBC engines equipped with 1987-91 L98 aluminum Corvette cylinder heads (non-EGR applications). Also, these manifolds will work with any SBC engine equipped with aftermarket cylinder heads, as long as they have a standard port flange opening and mounting bolt locations.
See More
Felpro – Felpro Engine Intake Manifold Gasket Set, MS 9334 SH (Part No.MS 9334 SH)
from
$24.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More
Top Picks for 1958 GMC 100 Carburetor Parts
Upgrade GMC 100s with top-quality Carburetor Parts parts, including 7 OEM and aftermarket selections for your 1958 model.
Edelbrock – Edelbrock EGR Valve Adapter, 1476 (Part No.1476)
from
$88.99
Edelbrock EGR Adapter No: 1476 has made installing your new intake and carburetor easier when using part No: 3701 and No: 3706. When using Edelbrock EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They’re made of cast aluminum and come complete with gaskets and bolts.
See More
Holley – Holley Performance and Race Carburetor: 500 CFM, No Choke, 2 Barrel, 2300 Bore, Single Inlet, 0-4412HBX (Part No.0-4412HBX)
from
$921.99
Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!
See More
Holley – Holley 2 BBL Carbs, 0-4412CT (Part No.0-4412CT)
from
$665.99
The 0-4412C is easily the winningest two barrel carburetor on the market, used for decades in circle track racing around the world. This new 500cfm 0-4412CT carburetor shares the hugely successful features of the original, but with changes aimed directly at circle track cars. The choke assembly has been removed for unobstructed airflow, plus it has been specially calibrated for circle track racing use. It comes out of the box ready to run with less modifying and less tuning at the track!
See More
Holley – Holley Street Carburetor: 500 CFM, Electric Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny, 0-80500 (Part No.0-80500)
from
$599.99
“Street Avenger carburetors are known to bolt on right out of the box and Holley is excited to announce the addition of our new 2bbl Street Avenger models available in 350 and 500 CFM. Street Avenger carburetors have great features such as optimized street calibrations; three vacuum ports for all necessary vacuum accessories; factory preset electric choke for easy startups; built-in fuel filters; and an included 3/8″” fuel line connection so there are no unnecessary trips back to the parts store.”
See More
Holley – Holley Street Avenger Carburetor, 0-80350 (Part No.0-80350)
from
$599.99
“Street Avenger carburetors are known to bolt on right out of the box. The 350 CFM Street Avenger carburetor has great features such as optimized street calibrations, two vacuum ports for all necessary vacuum accessories, factory preset electric choke for easy startups, built-in fuel filters, and an included 3/8″” fuel line connection so there are no unnecessary trips back to the parts store.”
See More
Edelbrock – Edelbrock Carburetor Progressive Throttle Linkage Kit, 1033 (Part No.1033)
from
$196.99
Be sure to always check that the arms will not become inverted after any adjustment. Some trial and error will be required to achieve a properly balanced set up.
See More
Felpro – Felpro Carburetor Mounting Gasket, 9093 (Part No.9093)
from
$3.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Top-Rated Air Intakes Brands For Your 1958 GMC 100
Shop for the best-rated brands offering Air Intakes and other products for your 1958 GMC 100s. Below you’ll find some of our best rated Air Intakes from Edelbrock, and more. Air Intakes from these brands that fit a 1958 100 start at just $395.99 and are rated as high as 4.4 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.
Popular Edelbrock 1958 GMC 100 Air Intakes
When it comes to maintaining or upgrading your 1958 GMC 100, using quality Air Intakes is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Air Intakes, specifically designed for the 1958 GMC 100. With over 1 Edelbrock brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $395.99. Plus, with over 1 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$395.99
(1)
Edelbrock Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, 2601
“The casting was beautiful in its natural finish. It had a bright appearance and the surface roughness was good for a sand casting. The machine finish ”
FAQs for 1958 GMC 100 Air Intakes
Which Air Intakes are best-sellers for 1958 GMC 100s?
Out of 21 Air Intakes that fit 1958 GMC 100s, the following parts are the top sellers:
- Edelbrock EGR Valve Adapter, 1476 (6340091) – $88.99
- Edelbrock Performer RPM Small Block Chevy Intake Manifold, 7101 (5020689) – $296.99
- "ARP Auto Racing For Use With Chevy 265/ 400 Cubic"", 12 Point Head Type, Polished, With Washers, 434-2101" (11529989) – $60.99
What’s the price range for 1958 GMC 100 Air Intakes?
Air Intake prices for the 1958 GMC 100 start at $3.49 and go up to $971.99 for the most premium parts.
What’s the average price of a Air Intake for a 1958 GMC 100?
The average price for Air Intakes for the 1958 GMC 100 is $485.94. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Air Intakes for other GMC 100 model years?
What are the cheapest Air Intakes for my 1958 GMC 100?
The cheapest 1958 GMC 100 Air Intakes we carry in stock are:
- Felpro Carburetor Mounting Gasket, 9093 (19780196) – $3.49
- Victor Reinz Air Cleaner Mounting Gasket, 71-13854-00 (50311994) – $3.49
- Felpro Engine Intake Manifold Gasket Set, MS 9498 SH-1 (19781146) – $24.99
- Felpro Engine Intake Manifold Gasket Set, MS 9334 SH (19781055) – $24.99
- "ARP Auto Racing For Use With Chevy 265/ 400 Cubic"", 12 Point Head Type, Polished, With Washers, 434-2101" (11529989) – $60.99
What are the top-rated Air Intakes that fit the 1958 GMC 100?
Out of 2 reviews by customers, our 1958 GMC 100 Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 1958 GMC 100 and their top-rated products:
- Intake Manifold Parts
- Edelbrock Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, 2601 (22342204) – $395.99
What types of Air Intakes do you sell for my 1958 GMC 100?
As of 8/2/26, these are some of the most in-demand types of Air Intakes for a 1958 GMC 100:
Can I get help with 1958 GMC 100 Air Intake orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Air Intakes and more.
What is your return policy for GMC 100 Air Intakes?
Advance Auto Parts keeps returns simple. For new GMC 100 Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
