1958 DeSoto Firesweep Steering and Chassis Parts

Essential 1958 DeSoto Firesweep Steering and Chassis Parts

MOOG – Strut Rod Bushing (Part No.K7039)

Strut Rod Bushing

from

$23.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to meet or exceed OE requirements
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Driveworks – Taper Bearing Cone (Part No.S-M-88048)

Taper Bearing Cone

from

$11.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Multi Purpose Seal (Part No.470567)

Multi Purpose Seal

from

$4.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Rare Parts – Tie Rod Sleeve (Part No.RP25522)

Tie Rod Sleeve

from

$21.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Complete with clamps
  • Used to set Toe in or out
  • replaces rusted or corroded sleeves
  • Used to connect inner and outer tie rod ends
See More

Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-65029)

Tie Rod End Adjusting Sleeve

from

$34.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Hardware included for easier installation (where applicable)
See More

MOOG – Tie Rod End Adjusting Sleeve (Part No.ES2004S)

Tie Rod End Adjusting Sleeve

from

$31.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Coated for corrosion resistance
  • Engineered to meet or exceed OE Performance
  • Wrench flats on housing and stud provide easy installation and alignment adjustment.
  • Polished Stud ball provides low socket torque.
  • Stud design is optimized to provide ideal stud swing and strength for each application.
See More

Rare Parts – Strut Rod Bushing (Part No.RP15681)

Strut Rod Bushing

from

$14.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Reduces tire wear
  • Improves handling while breaking
  • Aids in alignment of vehicle
See More

National – Multi Purpose Seal (Part No.6859S)

Multi Purpose Seal

from

$12.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Rare Parts – Ball Joint (Part No.RP10128)

Ball Joint

from

$17.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Driveworks – Ball Joint (Part No.DW-K772)

Ball Joint

from

$18.29
Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

Driveworks – Taper Bearing Set (Part No.S-A-2)

Taper Bearing Set

from

$8.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Rare Parts – Tie Rod End (Part No.RP25407)

Tie Rod End

from

$225.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.

Product Features:
  • Greaseable
  • Precision machining tolerances
  • Heat treated components
  • Low friction
See More

National – Bearings (Part No.A-2)

Bearings

from

$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Rare Parts – Idler Arm Bushing (Part No.RP15313)

Idler Arm Bushing

from

$73.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Improves steering response
  • Reduces wander
  • Reduces vibration
  • Improves steering response
See More

Lares – Remanufactured Power Steering Pump (Part No.2005)

Remanufactured Power Steering Pump

from

$312.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Powercraft – Pump Seal Kit (Part No.7897)

Pump Seal Kit

from

$36.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Pump Seal Kit (Part No.7898)

Pump Seal Kit

from

$27.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Pump Complete Rebuild Kit (Part No.7900)

Pump Complete Rebuild Kit

from

$72.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Pump Drive Shaft Seal Kit (Part No.8710)

Pump Drive Shaft Seal Kit

from

$25.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Pump Complete Rebuild Kit (Part No.7899)

Pump Complete Rebuild Kit

from

$125.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

National – Multi Purpose Seal (Part No.8773S)

Multi Purpose Seal

from

$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

1958 DeSoto Firesweep Steering and Chassis Parts

You count on your 1958 DeSoto Firesweep to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 28 Steering and Chassis Parts ranging in price from $4.79 to $312.99, you’re sure to find everything you need for your 1958 DeSoto Firesweep.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 7 different brands like Driveworks, National, and Moog. 1958 DeSoto Firesweep Steering and Chassis Parts start as low as $4.79!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 136 extensive product reviews on 1958 DeSoto Firesweep Steering and Chassis Parts.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1958 DeSoto Firesweep below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 1958 DeSoto Firesweep

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1958 DeSoto Firesweep running right for years to come. In our inventory you’ll find brands like Driveworks, National, Moog, and even more.

Popular MOOG Steering and Chassis Parts

You’ll find popular MOOG brand products across Tie Rods and Ball Joints. All are waiting to get your 1958 DeSoto Firesweep back on the road. Some of the top-rated MOOG products in these categories are:
Tie Rod End Adjusting Sleeve
from $31.49
(10)
Tie Rod End Adjusting Sleeve
Tie Rod End Sleeves
Ball Joint
from $40.99
(2)
Ball Joint
Lower Ball Joints
Strut Rod Bushing
from $23.99
(1)
Strut Rod Bushing
Strut Rod Kits

Top-Rated Driveworks Steering and Chassis Parts


If Driveworks are what you’re looking for, our inventory holds plenty. We stock Driveworks brand Steering and Chassis Parts for your 1958 DeSoto Firesweep, and some of our most reviewed Driveworks parts include:
Taper Bearing Set
from $8.99
(47)
Taper Bearing Set
Worm Shaft Bearings
Steering Tie Rod End Adjusting Sleeve
from $21.49
(38)
Steering Tie Rod End Adjusting Sleeve
Tie Rod End Sleeves

FAQs for 1958 DeSoto Firesweep Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 1958 DeSoto Firesweep?

Out of 28 Steering and Chassis Parts for the 1958 DeSoto Firesweep, the most popular in our inventory are:
Bearings
from $15.99
(38)
Bearings
Steering Shaft Bearings
Tie Rod End Adjusting Sleeve
from $34.99
This product is not rated
Tie Rod End Adjusting Sleeve
Tie Rod End Sleeves
Taper Bearing Cone
from $11.29
This product is not rated
Taper Bearing Cone
Pinion Bearings