1958 Chrysler New Yorker Drivetrains

Name: Ring Gear Bolt
Brand: Motive Gear
SKU: 1304
Price: 7.99 USD

Below you will find various in-demand Chrysler Drivetrains, components and accessories for your 1958 New Yorker. Advance Auto Parts has popular New Yorker parts like Spindles, Universal Joints, Transfer Cases and more. You’ll also find aftermarket and OEM Drivetrains for other New Yorker model years including 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996 and more. Select a category of 1958 Chrysler New Yorker Drivetrains below and start saving instantly.

Popular 1958 Chrysler New Yorker Drivetrains Categories

U-Joints

Differential Bearings

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Ring and Pinions

Spindle Lock Nuts

Transfer Case Output Shaft Bearings

Complete Differentials

Differential Ring Gear Bolts

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Automatic Transmission Differential Carrier Gaskets

Essential Drivetrains for 1958 Chrysler New Yorkers

from

$7.99

Product Features:

CHRY 8 3/4″ RING GEAR BOLTS C 8.25″

from

$2.49

Product Features:

RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND

from

$286.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits Chrysler 8.75″ ’41’ case housing with LM104912 carrier races
Included are carrier bearings and races, pinion bearings and races, pinion seal, marking compound and brush.

from

$459.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

Fits Chrysler 8.75″ ’42’ case housing with LM104912 carrier races
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, thread locker, marking compound with brush, and gasket.

from

$28.99

Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$57.99

1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.

from

$42.99

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:

For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

from

$52.99

Product Features:

MINI INSTALL KIT CHRYSLER 8.75 8 3/4″ EARLY 742 CASE

from

$1015.00

USA Standard Gear Power Lok posi for Chrysler 8.75″, smooth design

Product Features:

Gear Power Lok Posi LSD
Fits Chrysler 8.75″
Smooth design
Positraction

from

$450.99

The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$10.99

Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.

Product Features:

Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
7/8″ x 14 thread

from

$8.49

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$9.49

Product Features:

KIT SHIM PINION

from

$7.49

High-quality Differential Component Shim

Product Features:

SHIM KIT FITS-8.25-F7.5-AMC20-GM0

from

$25.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$4.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$13.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$16.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$10.49

Our Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.99

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$254.99

Product Features:

CHRY 12BLT 9.25 R&P-4.56 RATIO

from

$641.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon has an updated, proprietary, design that provides longer life and higher durability than the competition. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. We reccomend an OEM gear for van applications. This gear set is for ’09 and older applications only.

Product Features:

Fits 2010 and down Chrysler 9.25″ rear
9.25″ ring gear diameter
29 spline pinion
12 ring gear bolts
4.11 ratio

from

$449.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This is a coarse spline pinion which takes a 10 spline yoke.

Product Features:

Fits Chrysler 8.75″ “42” case housing
8.75″ ring gear diameter
10 spline pinion
12 ring gear bolts
3.23 ratio

from

$152.99

Set-up bearing (one bearing). HM803149. No return.

Product Features:

Set up bearing
Fits HM803149 pinion bearing
Easily slips on and off pinion journal to allow for pinion depth adjustment

from

$15.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$20.29

Product Features:

Brand may vary by location

from

$23.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

Upgrade your 1958 Chrysler New Yorker with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 1958 Chrysler New Yorker, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chrysler or enhancing its overall performance, Drivetrains are key to keeping your New Yorker functioning at its best. At Advance Auto Parts, we offer a wide selection of 40 Drivetrains for the 1958 Chrysler New Yorker, designed to meet your needs without breaking the bank. From Spindle replacements to Universal Joints upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1958 Chrysler New Yorker at great prices. Our Drivetrains inventory for this model ranges from just $3.99 to $456.99, with an average price of $91.14. Our 40 Drivetrains in stock come from 11 trusted brands, so you’re sure to find the right part for your 1958 Chrysler New Yorker without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1958 Chrysler New Yorker, we stock popular OEM and aftermarket Drivetrains from top names like National, Moog, Driveworks, and more. National Drivetrains start at just $8.99 and boast an impressive 4 stars average rating from customers. Moog and Driveworks also bring quality to the table, with Drivetrains available starting at $4.99, and at an average 4 stars rating. With 9 customer reviews and counting, our 1958 Chrysler New Yorker Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1958 Chrysler New Yorker is always ready to roll. We’re committed to providing you with everything you need to keep your New Yorker in top shape, all in one place. Start shopping confidently below for your 1958 Chrysler New Yorker!

Best-Selling Spindles for 1958 Chrysler New Yorkers

Enhance the driving experience in your Chrysler with 2 quality Spindle components, starting at $6.99.

show more show less

from

$8.99

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.99

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Popular 1958 Chrysler New Yorker Universal Joints

Customize your Chrysler with 6 Universal Joints products like U-Joints, all priced under $46.99.

show more show less

from

$15.99

DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$26.99

COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$28.99

COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$42.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

from

$46.99

Universal Joint

from

$3.99

Universal Joint

Top Picks for 1958 Chrysler New Yorker Transfer Cases

Upgrade Chrysler New Yorkers with top-quality Transfer Cases parts, including 1 OEM and aftermarket selections for your 1958 model.

show more show less

from

$4.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

In-Demand Differentials for 1958 Chrysler New Yorkers

Select from 31 premium Differentials parts for your 1958 Chrysler New Yorker, with prices ranging from $4.99 to $456.99.

show more show less

from

$38.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$6.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$8.49

from

$20.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$8.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$7.99

Product Features:

CHRY 8 3/4″ RING GEAR BOLTS C 8.25″

from

$11.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$22.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$13.49

Product Features:

KIT SHIM TOYO TRK 79-92 REAR/89-92 FRONT

from

$36.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$20.29

Product Features:

Brand may vary by location

from

$23.49

Product Features:

Brand may vary by location

from

$13.49

Product Features:

Brand may vary by location

from

$4.99

Product Features:

Brand may vary by location

from

$456.99

from

$342.99

For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

from

$342.99

RngPnn

from

$257.99

Product Features:

CHRY 10BLT 8.75 EARLY R/P 3.55 MGP 29SP USE MG7260-C875/MG1350-C87529

from

$257.99

Product Features:

CHRY 9BLT 8.75 EARLY R/P 3.73 MGP 10 SPL 742 CAST

from

$257.99

Product Features:

CHRY 10BLT 8.75 EARLY R/P 3.73 MGP 29SP USE MG7260-C875/MG1350-C87529

from

$222.99

RngPnnInstlKt

from

$169.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

MASTER KIT CHRYSLER 1.75″ PINION

from

$151.99

BEARING GSKT & SEAL MASTER KIT CHRY 8.75 EARLY 742 CSTNG W/SPOOL & AUB

from

$148.99

CHRYSLER 8 3/4 EARLY 742 CASTING SURE GRIP AND POWER LOCK ONLY

from

$131.99

KIT BRG & SEAL CHRYS. 1.75″ PINION

from

$117.99

KIT 8 3/4 CHRY 1.750 PINION 742 CST SURE GRIP & POWER LOCK ONLY

from

$112.99

Product Features:

MASTER KIT 8.75 CHRY 741 CASTING OPEN & AUBURN ONLY

from

$99.99

BRG MSTR KIT CHRYS 8 3/4 741 CASTNG POWER LOCK & SURE GRIP ONLY

from

$86.99

BEARING KIT CHRYS 8 3/4 741 CASTING

from

$52.99

Product Features:

MINI INSTALL KIT CHRYSLER 8.75 8 3/4″ EARLY 742 CASE

from

$6.69

CUP

Top-Rated Drivetrains Brands For Your 1958 Chrysler New Yorker

Shop for the best-rated brands offering Drivetrains and other products for your 1958 Chrysler New Yorkers. Below you’ll find some of our best rated Drivetrains from National, Moog, and Driveworks, and more. Drivetrains from these brands that fit a 1958 New Yorker start at just $4.99 and are rated as high as 4 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1958 Chrysler New Yorker Drivetrains

When it comes to maintaining or upgrading your 1958 Chrysler New Yorker, using quality Drivetrains is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Drivetrains, specifically designed for the 1958 Chrysler New Yorker. With over 6 National brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.99, with an average price of just $23.24. Plus, with over 4 customer reviews and an average rating of 4 stars, you can trust that our National Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$8.99

This product is not rated

Bearings

“”

from
$11.49

This product is not rated

Bearings

“”

from
$22.99

This product is not rated

Bearings

“”

Popular Moog 1958 Chrysler New Yorker Drivetrains

Moog auto parts is one of the highest quality Drivetrain brands in the market. Any 1958 Chrysler New Yorker owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1958 New Yorker, Advance Auto Parts carries a full inventory of 2 Moog Drivetrains. Plus you will be keeping your Chrysler in peak condition while saving money because prices on these Moog Drivetrains range from $26.99 to $28.99, plus, with more than 2 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from
$26.99

(1)

Greaseable Premium Universal Joint

“the u-joint itself fit fine however the grease fitting is too large for the hole provided in the u-joint. I had to enlarge the hole to fit the fitting”

from
$28.99

(1)

Greaseable Premium Universal Joint

“Got 2 for boat they must have been on the shelf for a while because the small amount of grease was waxy. A few pumps of the grease gun took car of tha”

FAQs for 1958 Chrysler New Yorker Drivetrains

Which Drivetrains are best-sellers for 1958 Chrysler New Yorkers?

Out of 40 Drivetrains that fit 1958 Chrysler New Yorkers, the following parts are the top sellers:

Bearings (18440327) – $8.99
Greaseable Premium Universal Joint (10086972) – $28.99
Greaseable Premium Universal Joint (10086982) – $26.99

What’s the price range for 1958 Chrysler New Yorker Drivetrains?

Drivetrain prices for the 1958 Chrysler New Yorker start at $3.99 and go up to $456.99 for the most premium parts.

What’s the average price of a Drivetrain for a 1958 Chrysler New Yorker?

The average price for Drivetrains for the 1958 Chrysler New Yorker is $91.14. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Chrysler New Yorker model years?

Yes, we currently carry Drivetrains for 51 model years of Chrysler New Yorkers between 1942 and 1996. Drivetrains are bought most frequently for the following model years: 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1989, and 1988.

What are the cheapest Drivetrains for my 1958 Chrysler New Yorker?

The cheapest 1958 Chrysler New Yorker Drivetrains we carry in stock are:

Universal Joint (5270200) – $3.99
Ball Bearing (5050081) – $4.99
Tapered Roller Bearing (10733422) – $4.99
Differential Carrier Gasket (5189284) – $6.49
CUP (50211146) – $6.69

What are the top-rated Drivetrains that fit the 1958 Chrysler New Yorker?

Out of 9 reviews by customers, our 1958 Chrysler New Yorker Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1958 Chrysler New Yorker and their top-rated products:

Universal Joints
- Greaseable Premium Universal Joint (10086982) – $26.99
- Universal Joint (10265717) – $15.99
- Greaseable Premium Universal Joint (10086972) – $28.99
Differentials
- Greaseable Premium Universal Joint (10086982) – $26.99
- Universal Joint (10265717) – $15.99
- Greaseable Premium Universal Joint (10086972) – $28.99

What types of Drivetrains do you sell for my 1958 Chrysler New Yorker?

As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 1958 Chrysler New Yorker:

Can I get help with 1958 Chrysler New Yorker Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chrysler Drivetrains and more.

What is your return policy for Chrysler New Yorker Drivetrains?

Advance Auto Parts keeps returns simple. For new Chrysler New Yorker Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1958 Chrysler New Yorker Drivetrains

Motive Gear – Ring Gear Bolt (Part No.1304)

Motive Gear – Ring Gear Bolt (Part No.14066913)

Yukon Gear – Bearing Install Kit For Chrysler 8.75" Two-Pinion (#41) Differential (Part No.11005)

Yukon Gear – Master Overhaul Kit For Chrysler 8.75" #42 Housing With LM104912/49 Carrier Bearings (Part No.14007)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.315G)

Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)

Richmond Gear – Differential Gear Install Kit (Part No.83-1041-B)

Motive Gear – Differential Gear Install Kit (Part No.C8.75IKE)

USA Standard Gear – Power Lok Positraction for Chrysler 8.75" (Part No.59027)

Powertrax – Lock Right Locker (Part No.1230-LR)

Yukon Gear – Pinion Nut (Part No.33142)

Motive Gear – Pinion Nut (Part No.1260823)

Motive Gear – Differential Pinion Shim Kit (Part No.1102)

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

National – Bearings (Part No.M804010)

Driveworks – Ball Bearing (Part No.S-107-DD)

Driveworks – Taper Bearing Cone (Part No.S-25580)

National – Bearings (Part No.JLM704610)

Dorman – Spindle Nut M27-2.0 (Part No.05107)

Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)

Felpro – Differential Carrier Gasket (Part No.RDS 6583)

Motive Gear – Differential Ring and Pinion (Part No.C9.25-456)

Yukon Gear – High Performance Ring & Pinion Gear Set For ’09 & Down Chrysler 9.25" In A 4.11 Ratio (Part No.24015)

Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 42 Housing In A 3.23 Ratio (Part No.24591)

Yukon Gear – Set Up Bearing (Part No.56041)

National – Bearings (Part No.HM88610)

Driveworks – Tapered Roller Bearing (Part No.S-HM-89443)

National – Bearings (Part No.M802048)

Dorman – Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (Part No.615-016.1)

Dorman – Spindle Nut 3/4 In.-16 Hex 1-1/16 In. (sold by each) (Part No.615-016)

Driveworks – Universal Joint (Part No.DW-315G)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.317)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.315G)

Spicer – Universal Joint (Part No.5-789X)

Spicer – Universal Joint (Part No.5-3228X)

Neapco – Universal Joint (Part No.1-6301)

Driveworks – Ball Bearing (Part No.S-107-DD)

National – Bearings (Part No.HM89443)

Felpro – Differential Carrier Gasket (Part No.RDS 6583)

Motive Gear – Pinion Nut (Part No.1260823)

National – Bearings (Part No.205)

National – Bearings (Part No.25520)

Motive Gear – Ring Gear Bolt (Part No.1304)

National – Bearings (Part No.HM89410)

National – Bearings (Part No.HM803110)

Motive Gear – Differential Pinion Shim Kit (Part No.1109)

National – Bearings (Part No.HM803149)

Driveworks – Tapered Roller Bearing (Part No.S-HM-89443)

Driveworks – Tapered Roller Bearing (Part No.S-HM-803149)

Driveworks – Tapered Roller Bearing (Part No.S-HM-803110)

Driveworks – Tapered Roller Bearing (Part No.S-HM-89410)

Powertrax – Lock Right Locker (Part No.1240-LR)

Richmond Gear – Differential Ring And Pinion (Part No.69-0048-1)

Richmond Gear – RngPnn (Part No.69-0047-1)

Motive Gear – Performance Differential Ring and Pinion (Part No.C887355M)

Motive Gear – Performance Differential Ring and Pinion (Part No.C887373E)

Motive Gear – Performance Differential Ring and Pinion (Part No.C887373M)

Richmond Gear – RngPnnInstlKt (Part No.83-1037-1)

Motive Gear – Differential Master Bearing Kit – Timken (Part No.R8.75ERMKT)

Motive Gear – Differential Master Bearing Kit – Timken (Part No.R8.75ERSMKT)

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R8.75ERMK)

Motive Gear – Differential Bearing Kit – Timken (Part No.R8.75ERT)

Motive Gear – Differential Bearing Kit – Koyo (Part No.R8.75ER)

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R8.75RMAMK)

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R8.75RMMK)

Motive Gear – Differential Bearing Kit – Koyo (Part No.R8.75RM)

Motive Gear – Differential Gear Install Kit (Part No.C8.75IKE)

FAG US – CUP (Part No.LM67010)