1958 Chevrolet Impala Fuel and Emissions Systems

Essential Fuel and Emissions Systems for 1958 Chevrolet Impalas

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG1858)

Fuel Pump Module Assembly: With Float Arm, Seal

from

$633.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Holley – Mechanical Fuel Pump (Part No.12-454-20)

Mechanical Fuel Pump

from

$212.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:
  • High Output Fuel Flow
  • Flows 170 gph Free Flow
  • Shutoff Pressure Pre-Set At 8 PSI
  • Fuel Pressure Regulator Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Redesigned High Flow Valves Ensure Adequate Fuel Delivery
  • Fuel Body Casting Can Be Rotated For Plumbing Situations
  • 3/4in.-16 Inlet And Outlet Ports
  • Fittings Not Included
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG0378)

Fuel Pump Module Assembly: With Float Arm, Seal

from

$377.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG1509)

Fuel Pump Module Assembly: With Float Arm, Seal

from

$359.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)

Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block

from

$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X

Product Features:
  • Black AnodizedFinish
  • High Capacity Fuel Rails
  • For Use W/ Pro-Flo XT Manifold #7137
  • -6 AN Inlet / Outlet
  • Made In The USA
See More

ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)

For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers

from

$10.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Properly Aligned
  • Conventional Hex Heads
  • Rust-Proof Stainless Bolts
  • 170,000 PSI
See More

Carquest Premium – Fuel Cap: 10825, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10825)

Fuel Cap: 10825, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$14.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Motorad – Tethered Fuel Cap (Part No.MGC834T)

Tethered Fuel Cap

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Come pre-assembled for quick and easy installation.
  • Several fastener options to work with any fuel cap compartment configuration
  • Fits vehicles orginally equipped with tether
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
See More

Carquest Premium – Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10491)

Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Motorad – Tethered Fuel Cap (Part No.MGC841T)

Tethered Fuel Cap

from

$30.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Come pre-assembled for quick and easy installation.
  • Several fastener options to work with any fuel cap compartment configuration
  • Fits vehicles orginally equipped with tether
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
See More

Carquest Premium – Fuel Cap: 10841, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10841)

Fuel Cap: 10841, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$21.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Dorman – Help – Fuel Pump Push Rod (Part No.03875)

Fuel Pump Push Rod

from

$15.29
Our Fuel Pump Push Rod is constructed from high-quality materials for a long service life. Replacement helps restore the fuel pump to proper operation so that your vehicle runs smoothly.

Product Features:
  • Direct replacement – this fuel pump push rod is designed to match the fit and function of the original rod on specified vehicles.
  • Ideal solution – this rod is a reliable replacement for an original part that has failed
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Competition Cams – FUEL PUMP PUSH ROD, CHEVY 1 EA (Part No.4607)

FUEL PUMP PUSH ROD, CHEVY 1 EA

from

$53.99
When a high pressure fuel pump is run with a steel roller cam core, the stock fuel pump pushrod is not compatible with the steel core. You can damage an expensive roller cam as a result of wear at the fuel pump lobe. COMP Cams offers several fuel pump pushrods for various applications.

Product Features:
  • Lightweight tubing with bronze tip for steel cams
  • 5.75″ Length
  • Eliminates wear at the fuel pump lobe often caused by a stock fuel pump pushrod
See More

ARP Auto Racing – Chrome Moly (Part No.134-8701)

Chrome Moly

from

$22.99
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you

Product Features:
  • Made From Premium Grade Aerospace Chrome Moly
  • Center Less Ground To Precise Diameter
  • Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
  • Provide With Required Reliability And Improved Performance
See More

Carquest Premium – Fuel Pump Push Rod PR2584015 (Part No.PR2584015)

Fuel Pump Push Rod PR2584015

from

$20.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)

EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706

from

$83.99


Product Features:
  • EGR Adapter
  • Clears OEM Intake
  • Includes Gaskets and Bolts
See More

Edelbrock – EGR Valve Adapter #8035 For Chevy Small-Block Gen I (Part No.8035)

EGR Valve Adapter #8035 For Chevy Small-Block Gen I

from

$33.99


Product Features:
  • EGR Adapter
  • Clears OEM Intake
  • Includes Gaskets and Bolts
See More

Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-814)

Mechanical Fuel Pump Mounting Pad Cover

from

$24.49
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.

Product Features:
  • Cover Hole In Block When Mech. Fuel Pump Is Removed
See More

Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)

Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy

from

$34.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.

Product Features:
  • Black Anodized Finish
  • Billet Aluminum Material
  • Mounting Hardware Included
  • Includes 1.5 mm Gasket
  • For Small-Block Chevy
See More

Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1516)

Fuel Pump Block-Off Plate

from

$12.99
Precision cut to cover stock fuel pump opening when converting to an electric fuel pump. Gasket included.

Product Features:
  • Chrome Plated Steel
  • Comes With Gasket
  • Easy Installation
See More

Upgrade your 1958 Chevrolet Impala with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1958 Chevrolet Impala, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Impala functioning at its best. At Advance Auto Parts, we offer a wide selection of 13 Fuel and Emissions Systems for the 1958 Chevrolet Impala, designed to meet your needs without breaking the bank. From Gas Cap replacements to Exhaust Gas Recirculation (EGR) Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1958 Chevrolet Impala at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $8.79 to $211.99, with an average price of $66.06. Our 13 Fuel and Emissions Systems in stock come from 4 trusted brands, so you’re sure to find the right part for your 1958 Chevrolet Impala without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1958 Chevrolet Impala, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Carquest Premium, Mr. Gasket, Edelbrock, and more. Carquest Premium Fuel and Emissions Systems start at just $8.79 and boast an impressive 4 stars average rating from customers. Mr. Gasket and Edelbrock also bring quality to the table, with Fuel and Emissions Systems available starting at $34.99, and at an average 4 stars rating. With 161 customer reviews and counting, our 1958 Chevrolet Impala Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1958 Chevrolet Impala is always ready to roll. We’re committed to providing you with everything you need to keep your Impala in top shape, all in one place. Start shopping confidently below for your 1958 Chevrolet Impala!

Best-Selling Gas Caps for 1958 Chevrolet Impalas

Enhance the driving experience in your Chevrolet with 2 quality Gas Cap components, starting at $8.79.

Carquest Premium – Fuel Cap: 10640, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10640)

Fuel Cap: 10640, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$8.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10491)

Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Most Popular 1958 Chevrolet Impala Exhaust Gas Recirculation (EGR) Parts

Customize your Chevrolet with 1 Exhaust Gas Recirculation (EGR) Parts products like EGR Valve Adapters, all priced under $83.99.

Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)

EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706

from

$83.99


Product Features:
  • EGR Adapter
  • Clears OEM Intake
  • Includes Gaskets and Bolts
See More

Top Picks for 1958 Chevrolet Impala Fuel Pumps

Upgrade Chevrolet Impalas with top-quality Fuel Pumps parts, including 9 OEM and aftermarket selections for your 1958 model.

Edelbrock – Performer RPM Series fuel pump for SBC and W Series Chevy (Part No.1721)

Performer RPM Series fuel pump for SBC and W Series Chevy

from

$168.99


Product Features:
  • Unique Valve Design
  • Improves Flow Quantity/Quality
  • Supports Engines Up To 550 HP
  • Hi-Vol 0.375 in. NPT Inlet/Outlet
  • Produces 6 psi
  • Gasoline Or Mixed Fuels Only
See More

Mr. Gasket – Electric Fuel Pump (Part No.12S)

Electric Fuel Pump

from

$64.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Product Features:
  • Solid-state Worry Free Electronics
  • Internal Pressure Regulating
  • Universal Design Allows For Easy Installation
  • No DiaphraGMs Or Mechanical Parts To Wear Out
  • They Make An Excellent Fuel Transfer or Booster Pump
  • Not designed for use on aircraft of any type.
  • Hose Barbs Fit 5/16″ Fuel Hose
  • Self-priming, 2 wire design
  • Eliminates vapor lock and flooding
See More

Carquest Premium – Mechanical Fuel Pump 1541132: Includes Gasket (Part No.1541132)

Mechanical Fuel Pump 1541132: Includes Gasket

from

$89.99
Carquest Premium mechanical fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Carquest Premium – Fuel Pump U2541854 (Part No.U2541854)

Fuel Pump U2541854

from

$80.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest Premium – Mechanical Fuel Pump 1542663: Includes Gasket (Part No.1542663)

Mechanical Fuel Pump 1542663: Includes Gasket

from

$53.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)

For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers

from

$10.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Properly Aligned
  • Conventional Hex Heads
  • Rust-Proof Stainless Bolts
  • 170,000 PSI
See More

Edelbrock – Victor Series fuel pump is for SBC and W Series Chevrolet (Part No.1711)

Victor Series fuel pump is for SBC and W Series Chevrolet

from

$174.99
High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).

Product Features:
  • Hi-Vol 0.5 in. NPT Inlet/Outlet
  • Large Alcohol-Proof Diaphragm
  • Aircraft-Type Allen Bolts
  • Produces 10 psi
  • For Gasoline Only
  • Finest Quality Material
  • Beautifully Detailed
  • Use w/Fuel Pressure Regulator PN[8190]
See More

Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)

Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy

from

$34.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.

Product Features:
  • Black Anodized Finish
  • Billet Aluminum Material
  • Mounting Hardware Included
  • Includes 1.5 mm Gasket
  • For Small-Block Chevy
See More

ARP Auto Racing – Chrome Moly (Part No.134-8701)

Chrome Moly

from

$22.99
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you

Product Features:
  • Made From Premium Grade Aerospace Chrome Moly
  • Center Less Ground To Precise Diameter
  • Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
  • Provide With Required Reliability And Improved Performance
See More

In-Demand Fuel Rails for 1958 Chevrolet Impalas

Select from 1 premium Fuel Rails parts for your 1958 Chevrolet Impala.

Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)

Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block

from

$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X

Product Features:
  • Black AnodizedFinish
  • High Capacity Fuel Rails
  • For Use W/ Pro-Flo XT Manifold #7137
  • -6 AN Inlet / Outlet
  • Made In The USA
See More

Top-Rated Fuel and Emissions Systems Brands For Your 1958 Chevrolet Impala

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1958 Chevrolet Impalas. Below you’ll find some of our best rated Fuel and Emissions Systems from Carquest Premium, Mr. Gasket, and Edelbrock, and more. Fuel and Emissions Systems from these brands that fit a 1958 Impala start at just $8.79 and are rated as high as 4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 1958 Chevrolet Impala Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1958 Chevrolet Impala, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Fuel and Emissions Systems, specifically designed for the 1958 Chevrolet Impala. With over 5 Carquest Premium brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.79, with an average price of just $51.75. Plus, with over 2 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Mechanical Fuel Pump 1541132: Includes Gasket
from
$89.99
This product is not rated

Mechanical Fuel Pump 1541132: Includes Gasket

“”

Fuel Pump U2541854
from
$80.99
This product is not rated

Fuel Pump U2541854

“”

Popular Mr. Gasket 1958 Chevrolet Impala Fuel and Emissions Systems

Mr. Gasket auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1958 Chevrolet Impala owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1958 Impala, Advance Auto Parts carries a full inventory of 1 Mr. Gasket Fuel and Emissions Systems. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Mr. Gasket Fuel and Emissions Systems range up to $64.99, plus, with more than 37 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

Electric Fuel Pump
from
$64.99

(37)

Electric Fuel Pump

“It works as advertised.”

FAQs for 1958 Chevrolet Impala Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1958 Chevrolet Impalas?

Out of 13 Fuel and Emissions Systems that fit 1958 Chevrolet Impalas, the following parts are the top sellers:

What’s the price range for 1958 Chevrolet Impala Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1958 Chevrolet Impala start at $8.79 and go up to $211.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1958 Chevrolet Impala?

The average price for Fuel and Emissions Systems for the 1958 Chevrolet Impala is $66.06. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Chevrolet Impala model years?

Yes, we currently carry Fuel and Emissions Systems for 51 model years of Chevrolet Impalas between 1959 and 2020. Fuel and Emissions Systems are bought most frequently for the following model years: 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, and 2012.

What are the cheapest Fuel and Emissions Systems for my 1958 Chevrolet Impala?

The cheapest 1958 Chevrolet Impala Fuel and Emissions Systems we carry in stock are:

What are the top-rated Fuel and Emissions Systems that fit the 1958 Chevrolet Impala?

Out of 161 reviews by customers, our 1958 Chevrolet Impala Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 1958 Chevrolet Impala and their top-rated products:

What types of Fuel and Emissions Systems do you sell for my 1958 Chevrolet Impala?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1958 Chevrolet Impala:

Can I get help with 1958 Chevrolet Impala Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Fuel and Emissions Systems and more.

What is your return policy for Chevrolet Impala Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Chevrolet Impala Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.