1957 Jeep Utility Wagon Steering and Chassis Parts

Essential Steering and Chassis Parts for 1957 Jeep Utility Wagons

Omix – Tie Rod End (Part No.18043.01)

Tie Rod End

from

$17.99
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.

Product Features:
  • Steel
  • With Hardware
  • OE Style
  • Direct Fit
See More

Crown Auto Jeep Replacmnt – Tie Rod End, Non-Greasable, Outer, LHD (Part No.J8136674)

Tie Rod End, Non-Greasable, Outer, LHD

from

$20.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Limited 12 Month Or 12,000 Mile Warranty
See More

Omix – Tie Rod; RH (Part No.18043.02)

Tie Rod; RH

from

$19.29
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.

Product Features:
  • Steel
  • With Hardware
  • OE Style
  • Direct Fit
See More

MOOG – Tie Rod End (Part No.ES62L)

Tie Rod End

from

$77.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)

Power Steering Oil Cooler Medium Duty

from

$36.49
3/4″ x 2-1/2″ x 12″ power steering oil cooler medium duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.

Product Features:
  • Medium-duty power steering oil cooler
  • Size: 3/4″ x 2-1/2″ x 12″
  • For vehicle with 3/8″ ID power steering return hose
  • Removes destructive heat and helps prolong power steering system life
See More

Imperial – Quick Connect Coupler (Part No.240250)

Quick Connect Coupler

from

$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:
  • Quick Connect coupler
  • Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
  • Simplifies transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Rancho – Single Steering Damper Kit (Part No.RS97355)

Single Steering Damper Kit

from

$113.99
Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho® steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes one Rancho RS5000® steering stabilizer and installation brackets.

Product Features:
  • COMPATIBILITY — Designed for a variety of trucks and SUVs from Chevrolet®, GMC®, Ford®, Dodge®, Jeep®, Plymouth® and International®
  • IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
  • ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires.
  • ENGINEERED TO LAST — Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
  • EASY TO INSTALL — Includes one Rancho RS5000® steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
  • RESISTS CORROSION — Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
  • PRECISION DESIGN — Brackets are CNC cut and bent to exact specifications for a perfect fit
See More

Omix – Steering Gear Box Sector Shaft Bushing (Part No.18029.07)

Steering Gear Box Sector Shaft Bushing

from

$20.79
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.

Product Features:
  • Increased Accuracy
  • OE Style
  • Direct Fit
See More

Upgrade your 1957 Jeep Utility Wagon with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1957 Jeep Utility Wagon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Utility Wagon functioning at its best. At Advance Auto Parts, we offer a wide selection of 11 Steering and Chassis Parts for the 1957 Jeep Utility Wagon, designed to meet your needs without breaking the bank. From Tie Rod replacements to Power Steering Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1957 Jeep Utility Wagon at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $11.49 to $113.99, with an average price of $30.31. Our 11 Steering and Chassis Parts in stock come from 4 trusted brands, so you’re sure to find the right part for your 1957 Jeep Utility Wagon without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1957 Jeep Utility Wagon, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Imperial, and more. Imperial Steering and Chassis Parts start at just $11.49 and boast an impressive 4 stars average rating from customers. With 467 customer reviews and counting, our 1957 Jeep Utility Wagon Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1957 Jeep Utility Wagon is always ready to roll. We’re committed to providing you with everything you need to keep your Utility Wagon in top shape, all in one place. Start shopping confidently below for your 1957 Jeep Utility Wagon!

Best-Selling Tie Rods for 1957 Jeep Utility Wagons

Enhance the driving experience in your Jeep with 3 quality Tie Rod components, starting at $17.99.

Crown Auto Jeep Replacmnt – Tie Rod End, Non-Greasable, Outer, LHD (Part No.J8136674)

Tie Rod End, Non-Greasable, Outer, LHD

from

$20.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Limited 12 Month Or 12,000 Mile Warranty
See More

Omix – Tie Rod; RH (Part No.18043.02)

Tie Rod; RH

from

$19.29
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.

Product Features:
  • Steel
  • With Hardware
  • OE Style
  • Direct Fit
See More

Omix – Tie Rod End (Part No.18043.01)

Tie Rod End

from

$17.99
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.

Product Features:
  • Steel
  • With Hardware
  • OE Style
  • Direct Fit
See More

Most Popular 1957 Jeep Utility Wagon Power Steering Parts

Customize your Jeep with 6 Power Steering Parts products like Power Steering Pressure Hoses and Power Steering Coolers, all priced under $36.49.

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Quick Connect Coupler (Part No.240250)

Quick Connect Coupler

from

$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:
  • Quick Connect coupler
  • Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
  • Simplifies transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)

Power Steering Oil Cooler Medium Duty

from

$36.49
3/4″ x 2-1/2″ x 12″ power steering oil cooler medium duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.

Product Features:
  • Medium-duty power steering oil cooler
  • Size: 3/4″ x 2-1/2″ x 12″
  • For vehicle with 3/8″ ID power steering return hose
  • Removes destructive heat and helps prolong power steering system life
See More

Top Picks for 1957 Jeep Utility Wagon Gear Boxes

Upgrade Jeep Utility Wagons with top-quality Gear Boxes parts, including 1 OEM and aftermarket selections for your 1957 model.

Rancho – Single Steering Damper Kit (Part No.RS97355)

Single Steering Damper Kit

from

$113.99
Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho® steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes one Rancho RS5000® steering stabilizer and installation brackets.

Product Features:
  • COMPATIBILITY — Designed for a variety of trucks and SUVs from Chevrolet®, GMC®, Ford®, Dodge®, Jeep®, Plymouth® and International®
  • IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
  • ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires.
  • ENGINEERED TO LAST — Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
  • EASY TO INSTALL — Includes one Rancho RS5000® steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
  • RESISTS CORROSION — Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
  • PRECISION DESIGN — Brackets are CNC cut and bent to exact specifications for a perfect fit
See More

In-Demand Steering Shafts for 1957 Jeep Utility Wagons

Select from 1 premium Steering Shafts parts for your 1957 Jeep Utility Wagon.

Omix – Steering Gear Box Sector Shaft Bushing (Part No.18029.07)

Steering Gear Box Sector Shaft Bushing

from

$20.79
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.

Product Features:
  • Increased Accuracy
  • OE Style
  • Direct Fit
See More

Top-Rated Steering and Chassis Parts Brands For Your 1957 Jeep Utility Wagon

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1957 Jeep Utility Wagons. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial, and more. Steering and Chassis Parts from these brands that fit a 1957 Utility Wagon start at just $11.49 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Imperial 1957 Jeep Utility Wagon Steering and Chassis Parts

When it comes to maintaining or upgrading your 1957 Jeep Utility Wagon, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 1957 Jeep Utility Wagon. With over 6 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $23.54. Plus, with over 211 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Power Steering Oil Cooler Medium Duty
from
$36.49
This product is not rated

Power Steering Oil Cooler Medium Duty

“”

Mounting Kit System
from
$11.49

(27)

Mounting Kit System

“Perfect for my transmission cooler holds it very good in place”

Transmission Oil Cooler Hose
from
$32.49

(94)

Transmission Oil Cooler Hose

“its a hose what cam I say”

FAQs for 1957 Jeep Utility Wagon Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1957 Jeep Utility Wagons?

Out of 11 Steering and Chassis Parts that fit 1957 Jeep Utility Wagons, the following parts are the top sellers:

What’s the price range for 1957 Jeep Utility Wagon Steering and Chassis Parts?

Steering and Chassis Part prices for the 1957 Jeep Utility Wagon start at $11.49 and go up to $113.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1957 Jeep Utility Wagon?

The average price for Steering and Chassis Parts for the 1957 Jeep Utility Wagon is $30.31. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Jeep Utility Wagon model years?

Yes, we currently carry Steering and Chassis Parts for 8 model years of Jeep Utility Wagons between 1956 and 1964. Steering and Chassis Parts are bought most frequently for the following model years: 1964, 1963, 1962, 1961, 1960, 1959, 1958, and 1956.

What are the cheapest Steering and Chassis Parts for my 1957 Jeep Utility Wagon?

The cheapest 1957 Jeep Utility Wagon Steering and Chassis Parts we carry in stock are:

What are the top-rated Steering and Chassis Parts that fit the 1957 Jeep Utility Wagon?

Out of 467 reviews by customers, our 1957 Jeep Utility Wagon Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1957 Jeep Utility Wagon and their top-rated products:

What types of Steering and Chassis Parts do you sell for my 1957 Jeep Utility Wagon?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 1957 Jeep Utility Wagon:

Can I get help with 1957 Jeep Utility Wagon Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Steering and Chassis Parts and more.

What is your return policy for Jeep Utility Wagon Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Jeep Utility Wagon Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.