1957 Chevrolet Corvette Ignition Coils and Boots

Essential 1957 Chevrolet Corvette Ignition Coils and Boots

Delphi – Ignition Coil (Part No.GN10190)

Ignition Coil

from

$65.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

Driveworks – Electronic Ignition Coil (Part No.26196)

Electronic Ignition Coil

from

$31.99
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

MSD Ignition – Coils; Pro Power; GM LS2/3/4/7/9; 05-13; 8-Pack (Part No.82878)

Coils; Pro Power; GM LS2/3/4/7/9; 05-13; 8-Pack

from

$909.99
MSD ignition’s Multiple Spark Coils (MSC) will fit in place of the stock gen-III GM coils and connect directly to the factory connectors. Once installed, you’ll have the power and performance of higher energy sparks, crowned with MSD’s multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance. The MSC delivers up to three times the current of the stock coils. Plus, the coils fire multiple times.

Product Features:
  • Multiple Sparks At Idle RPM
  • Improved Spark Energy And Voltage Output
  • Patented Winding Design and Materials
  • Direct Bolt-In to Factory Connectors
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1483)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$33.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest – Ignition Coil (Part No.E43)

Ignition Coil

from

$40.99
BWD SELECT® replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • Manufactured using high-quality materials to provide superior durability and long service life
  • Designed and engineered to ensure precise performance
  • The BWD SELECT® HEI/DIS ignition coils have solid brass high voltage terminals. The benefit is better connections and greater corrosion resistance.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Delphi – Ignition Coil (Part No.F3000204504DEL)

Ignition Coil

from

$71.50
Delphi ignition coils feature precise spark timing response for increased fuel economy and faster crank-to-run. The ignition coils provide accurate electrical energy to create a voltage potential at the spark plug, providing for superior engine performance that adjusts to driving and environment conditions. Plus, like all Delphi ignition system components, they enable engine management systems to maintain tighter control over emissions, economy and performance.

Product Features:
  • Improved dwell accuracy decreases module and coil temperatures for greater reliability
  • Noise abatement material between laminations reduces audible coil noise
  • Cassettes have improved primary connector for greater ease of assembly compared to designs with one connector for each coil
  • Lower primary inductance provides high-speed performance
  • Early and precise electronic spark timing helps improve fuel economy and provides faster crank-to-run
  • Higher energy delivered to combustible mixture provides cleaner combustion to help manufacturers meet on-board diagnostics (OBD II) requirements
  • Direct connection to spark plugs (via small boot) eliminates spark plug wires
  • Composite iron coils provide programmable energy
  • Coil per cylinder dwell overlap electronics deliver better high speed performance and better heat dissipation compared to some conventional technologies
  • Coil per cylinder ramp and fire electronics decrease power dissipation and increase efficiency
  • Radio frequency interference (RFI) suppressor optional
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest – Ignition Coil (Part No.26C1078)

Ignition Coil

from

$34.49
Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.

Product Features:
  • High output
  • Long spark duration
  • High dielectric strength
  • Corrosion resistant connections
  • High reliability
  • Long service life
See More

Carquest Premium – Ignition Coil Mounting Bracket (Part No.MBA1001)

Ignition Coil Mounting Bracket

from

$11.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Designed to meet or exceed OE specifications in form, fit and function
See More

ACDelco – IGNITION COIL MOUNTI (Part No.F3011582816ACD)

IGNITION COIL MOUNTI

from

$47.10
IGNITION COIL MOUNTI

Accel – 8Mm Super Stock Spiral Cust Bk (Part No.5050K)

8Mm Super Stock Spiral Cust Bk

from

$88.99
These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.

Product Features:
  • Ferro-Spiral supression core eliminates RFI/EMI
  • 500 ohms per foot of resistance
  • 500 Ohms Per Foot Resistance
  • 550 Degree Wire Temperature Rating
  • Meets Or Exceeds OE Boot Temperature Rating
  • Magnetic Suppression
  • 500 Ohms Resistance
See More

Accel – 8Mm Super Stock Graphite Uni (Part No.4041R)

8Mm Super Stock Graphite Uni

from

$63.29
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040K)

Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set

from

$65.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450° F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
See More

MSD Ignition – Wire Set; Super Conductor; Small Block Chevy with L.P. Distributor (Part No.31249)

Wire Set; Super Conductor; Small Block Chevy with L.P. Distributor

from

$126.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy; Socket Cap (Part No.31653)

Wire Set; Black Super Conductor; Small Block Chevy; Socket Cap

from

$181.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Bolt-on Performance
  • Conductor core features DuPont Kevlar material for increased tensile strength
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

MSD Ignition – Wire Set; Super Conductor; Small Block Chevy with HEI Cap (Part No.35599)

Wire Set; Super Conductor; Small Block Chevy with HEI Cap

from

$129.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

MSD Ignition – Wire Set; Street Fire; SBC; Socket Distributor Cap over VC (Part No.5565)

Wire Set; Street Fire; SBC; Socket Distributor Cap over VC

from

$72.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8126)

Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit

from

$39.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

MSD Ignition – Wire Set; Street Fire; Corvette 305-350; HEI; 75-82 (Part No.5566)

Wire Set; Street Fire; Corvette 305-350; HEI; 75-82

from

$72.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

Accel – GM F-Body Ls1/Ls6 01-97 (Part No.9052C)

GM F-Body Ls1/Ls6 01-97

from

$193.99
ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.

Product Features:
  • Ceramic boots withstand up to 2,000░ Fahrenheit
  • Ceramic boots withstand up to 2,000° Fahrenheit
  • 8mm double silicone construction black wire rated at 600░ F rated
  • 8mm double silicone construction black wire rated at 600° F rated
  • 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
  • Universal and custom fit applications
  • Universal And Custom Fit Applications
See More

NGK – NGK Wire Set (Part No.51130)

NGK Wire Set

from

$80.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9748RR)

Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core

from

$92.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

MSD Ignition – Wire Set; Super Conductor; Small Block Chevy 350; HEI (Part No.31359)

Wire Set; Super Conductor; Small Block Chevy 350; HEI

from

$129.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Bolt-on Performance
  • Conductor core features DuPont Kevlar material for increased tensile strength
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

Accel – Wire:X9000 Ls Ceramic 180 11In (Part No.9059C)

Wire:X9000 Ls Ceramic 180 11In

from

$168.99
ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees Fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit. In addition to 1997-2015 Gen 3/4 LS, also a direct fit for Gen V GM engines: 2015-2016 Cadillac Escalade 6.2L 2016 Chevrolet Camaro 6.2L 2014-2016 Chevrolet Corvette 6.2L 2015-2016 Chevrolet Corvette Z06 6.2L 2014-2016 Chevrolet Silverado 1500 4.3L/5.3L/6.2L 2015-2016 Chevrolet Suburban 5.3L 2015-2016 Chevrolet Tahoe 5.3L 2014-2016 GMC Sierra 1500 4.3L/5.3L/6.2L 2015-2016 GMC Yukon 5.3L/6.2L

Product Features:
  • Total length= 12″
  • Straight Spark Plug Boot
  • Ceramic boots withstand up to 2,000░ Fahrenheit
  • Ceramic boots withstand up to 2,000° Fahrenheit
  • 8mm double silicone construction black wire rated at 600░ F rated
  • 8mm double silicone construction black wire rated at 600° F rated
  • 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
See More

MSD Ignition – Wire Set; Super Conductor; Black; Universal LS-Series; Remote Coils (Part No.32073)

Wire Set; Super Conductor; Black; Universal LS-Series; Remote Coils

from

$242.99
For GM Gen-III engines such as the LS1 or LS6, these wires are perfect when you relocate the coils. Both 90 degree and MA boots supplied.

Product Features:
  • Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
  • Distributor Cap – Boots and Terminals Included
  • Includes Mini-Stripper-Crimper For Factory Style Crimps
  • Size 90 Degree And Multi-Angled Boots Supplied
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

NGK – NGK Wire Set (Part No.51434)

NGK Wire Set

from

$40.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8141)

Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit

from

$46.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

1957 Chevrolet Corvette Ignition Coils and Boots

Maybe you’re in the middle of a full rebuild of that 1957 Chevrolet Corvette. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 11 different Ignition Coils and Boots in our inventory ranging from $11.99 to $126.99. That means you can find the exact parts or products you need to keep that 1957 Chevrolet Corvette running smoothly.

Ignition Coils and Boots are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1957 Chevrolet Corvette. Carquest, Carquest Premium, and ACDelco are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Ignition Coils and Boots for your 1957 Chevrolet Corvette, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 1957 Chevrolet Corvette rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Ignition Coils and Boots Brands To Make Your 1957 Chevrolet Corvette Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1957 Chevrolet Corvette demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your Corvette the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.

Popular Carquest Ignition Coils and Boots

We carry Carquest parts in our stock across Ignition Coils categories, plus more. For a 1957 Chevrolet Corvette, our most popular Carquest Ignition Coils and Boots include:
Ignition Coil
from $39.05
(3)
Ignition Coil
Ignition Coils

FAQs for 1957 Chevrolet Corvette Ignition Coils and Boots

What are the most purchased Ignition Coils and Boots for the 1957 Chevrolet Corvette?

Out of 11 Ignition Coils and Boots for the 1957 Chevrolet Corvette, the most popular in our inventory are:
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
from $41.49
This product is not rated
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
Ignition Coils
Ignition Coil: Meets OE Specifications, 1 Count
from $35.49
This product is not rated
Ignition Coil: Meets OE Specifications, 1 Count
Ignition Coils
Ignition Coil
from $34.49
This product is not rated
Ignition Coil
Ignition Coils