1956 GMC PM151 Performance and Racing Products
Find Your Specific 1956 GMC PM151 Performance and Racing Products
Below you will find various in-demand GMC Performance and Racing Products, components and accessories for your 1956 PM151. Advance Auto Parts has popular PM151 parts like Performance Engines, Performance Radiators, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other PM151 model years including
1955,
1957,
1958,
1959 and more. Select a category of 1956 GMC PM151 Performance and Racing Products below and start saving instantly.
Popular 1956 GMC PM151 Performance and Racing Products Categories
Essential Performance and Racing Products for 1956 GMC PM151s
Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (Part No.2701)
from
$195.99
Edelbrock part No. 2701 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. With that the Edelbrock Performer EPS intake manifold has a runner design that’s “tuned” for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold No. 2101 on a 350 Chevy. From 3000 to 4500 rpm, the power increases averaged 5+ ft-lbs. of torque for more performance where you need it most. PLEASE NOTE: Will not fit under stock Corvette hood!
Product Features:
See More
Product Features:
- Maximizes Performance with Edelbrock Carburetors
- Runners Tuned to Match Square Bore Carburetor
- Maximizes Peak Torque Around 3500 RPM
- Excellent Throttle Response and Mid-Range Power
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
- PLEASE NOTE: Will not fit under stock Corvette hood!
Edelbrock – Performer RPM AIR-Gap Small Block Chevy Black Intake Manifold (Part No.75013)
from
$552.99
Edelbrock part #75013 RPM Air-Gap RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8’s. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that’s used on our Victor Series competition intakes.
Product Features:
See More
Product Features:
- 1500-6500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.2 in. Front Height, 4.72 in. Center Height, 5.25 in. Rear Height
- Black Powder Coated Finish
- Non-EGR
Edelbrock – C-357-B Triple-Deuce Intake Manifold for 1955-86 262-400 c.i.d. SB Chevys (Part No.5418)
from
$540.99
Edelbrock part #5418 C-357-B Triple-Deuce intake manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys, this manifold has a balanced 180-degree firing order port runner arrangement. It contains an exhaust gas heat crossover and offers excelle
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type 6-Pack Style Flange
- 3.77 in. Front Height, 4.35 in. Center Height, 4.88 in. Rear Height
- Satin Finish
- Non-EGR
Edelbrock – Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy (Part No.2703)
from
$339.99
Edelbrock part #2703 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thro
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
- Satin Finish
- Non-EGR W/ Oil Fill Tube
Edelbrock – Torker II Intake Manifold Small-Block Chevy (Part No.5001)
from
$281.99
2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Not for mileage or emissions applications. For trucks or vans use PN(2701) instead. Not for LT1 or Chevy bowtie heads. Not for 1987 and later stock aluminum heads. Available in cast or polished.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
- Not for Mileage or Emissions Applications
- For Trucks or Vans Use PN[2701] Instead
- Not for LT1 or Chevy Bowtie Heads
- Not for 1987 and Later Stock Aluminum Heads
Flowtech – Real-Seal; Header Gasket (Part No.99150AFLT)
from
$93.99Product Features:
- Water/Weather Resistant
- Re-Useable
- Will Not Burn Or Blow Out
- Suitable For Port-Matching
- Made In USA
Mr. Gasket – Alternator Bracket (Part No.9850)
from
$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- F-Style
- Heavy Gauge Steel Construction
- Fits Small Block Chevy 265-400 CID
- Must Be Used With Part 9852
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$54.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Upgrade your 1956 GMC PM151 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1956 GMC PM151, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your PM151 functioning at its best. At Advance Auto Parts, we offer a wide selection of 7 Performance and Racing Products for the 1956 GMC PM151, designed to meet your needs without breaking the bank.
From
Performance Engine
replacements to
Performance Radiators
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1956 GMC PM151 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $25.99 to $540.99, with
an average price of $198.62.
Our 7 Performance and Racing Products in stock come from 3 trusted brands, so you’re sure to find the right part for your 1956 GMC PM151 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1956 GMC PM151, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Edelbrock, and more.
Edelbrock Performance and Racing Products
start at just $195.99 and boast an impressive 4.4 stars average rating from customers.
With 10 customer reviews and counting, our 1956 GMC PM151 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1956 GMC PM151 is always ready to roll. We’re committed to providing you with everything you need to keep your PM151 in top shape, all in one place.
Start shopping confidently below for your 1956 GMC PM151!
Best-Selling Performance Engines for 1956 GMC PM151s
Enhance the driving experience in your GMC with 4 quality Performance Engine components, starting at $195.99.
Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (Part No.2701)
from
$195.99
Edelbrock part No. 2701 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. With that the Edelbrock Performer EPS intake manifold has a runner design that’s “tuned” for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold No. 2101 on a 350 Chevy. From 3000 to 4500 rpm, the power increases averaged 5+ ft-lbs. of torque for more performance where you need it most. PLEASE NOTE: Will not fit under stock Corvette hood!
Product Features:
See More
Product Features:
- Maximizes Performance with Edelbrock Carburetors
- Runners Tuned to Match Square Bore Carburetor
- Maximizes Peak Torque Around 3500 RPM
- Excellent Throttle Response and Mid-Range Power
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
- PLEASE NOTE: Will not fit under stock Corvette hood!
Edelbrock – Torker II Intake Manifold Small-Block Chevy (Part No.5001)
from
$281.99
2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Not for mileage or emissions applications. For trucks or vans use PN(2701) instead. Not for LT1 or Chevy bowtie heads. Not for 1987 and later stock aluminum heads. Available in cast or polished.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
- Not for Mileage or Emissions Applications
- For Trucks or Vans Use PN[2701] Instead
- Not for LT1 or Chevy Bowtie Heads
- Not for 1987 and Later Stock Aluminum Heads
Edelbrock – Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy (Part No.2703)
from
$339.99
Edelbrock part #2703 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thro
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
- Satin Finish
- Non-EGR W/ Oil Fill Tube
Edelbrock – C-357-B Triple-Deuce Intake Manifold for 1955-86 262-400 c.i.d. SB Chevys (Part No.5418)
from
$540.99
Edelbrock part #5418 C-357-B Triple-Deuce intake manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys, this manifold has a balanced 180-degree firing order port runner arrangement. It contains an exhaust gas heat crossover and offers excelle
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type 6-Pack Style Flange
- 3.77 in. Front Height, 4.35 in. Center Height, 4.88 in. Rear Height
- Satin Finish
- Non-EGR
Most Popular 1956 GMC PM151 Performance Radiators
Customize your GMC with 1 Performance Radiators products
like Performance Radiator Caps, all
priced under $54.99.
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$54.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Top Picks for 1956 GMC PM151 Performance Exhaust Products
Upgrade GMC PM151s with top-quality Performance Exhaust Products parts, including 2 OEM and aftermarket selections for your 1956 model.
Flowtech – Real-Seal; Header Gasket (Part No.99150AFLT)
from
$93.99Product Features:
- Water/Weather Resistant
- Re-Useable
- Will Not Burn Or Blow Out
- Suitable For Port-Matching
- Made In USA
Mr. Gasket – Alternator Bracket (Part No.9850)
from
$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- F-Style
- Heavy Gauge Steel Construction
- Fits Small Block Chevy 265-400 CID
- Must Be Used With Part 9852
Top-Rated Performance and Racing Products Brands For Your 1956 GMC PM151
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1956 GMC PM151s. Below you’ll find some of our best rated Performance and Racing Products from Edelbrock, and more. Performance and Racing Products from these brands that fit a 1956 PM151 start at just $195.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Edelbrock 1956 GMC PM151 Performance and Racing Products
When it comes to maintaining or upgrading your 1956 GMC PM151, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Performance and Racing Products, specifically designed for the 1956 GMC PM151. With over 1 Edelbrock brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $195.99. Plus, with over 7 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$195.99
(7)
Performer EPS Intake Manifold for 1955-86 Small-Block Chevy
“Removed a Weiand Stealth manifold and replaced with the Edelbrock, while doing a dyno test – increased HP & Torque on a modified 350, very good for st”
FAQs for 1956 GMC PM151 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1956 GMC PM151s?
Out of 7 Performance and Racing Products that fit 1956 GMC PM151s, the following parts are the top sellers:
- Alternator Bracket (6124151) – $25.99
- Torker II Intake Manifold Small-Block Chevy (6121195) – $281.99
- Thermocap Radiator Cap (10648773) – $54.99
What’s the price range for 1956 GMC PM151 Performance and Racing Products?
Performance and Racing Product prices for the 1956 GMC PM151 start at $25.99 and go up to $540.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1956 GMC PM151?
The average price for Performance and Racing Products for the 1956 GMC PM151 is $198.62. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other GMC PM151 model years?
What are the cheapest Performance and Racing Products for my 1956 GMC PM151?
The cheapest 1956 GMC PM151 Performance and Racing Products we carry in stock are:
- Alternator Bracket (6124151) – $25.99
- Thermocap Radiator Cap (10648773) – $54.99
- Real-Seal; Header Gasket (6390007) – $93.99
- Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (17340006) – $195.99
- Torker II Intake Manifold Small-Block Chevy (6121195) – $281.99
What are the top-rated Performance and Racing Products that fit the 1956 GMC PM151?
Out of 10 reviews by customers, our 1956 GMC PM151 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1956 GMC PM151 and their top-rated products:
- Performance Engines
- Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (17340006) – $195.99
- Performance Exhaust Products
- Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (17340006) – $195.99
What types of Performance and Racing Products do you sell for my 1956 GMC PM151?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1956 GMC PM151:
Can I get help with 1956 GMC PM151 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.
What is your return policy for GMC PM151 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new GMC PM151 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
