1956 Chevrolet One-Fifty Series Fuel and Emissions Systems
More 1956 Chevrolet One-Fifty Series Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1956 Chevrolet One-Fifty Series, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1956 Chevrolet One-Fifty Series Fuel and Emissions Systems
Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)
from
$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X
Product Features:
See More
Product Features:
- Black AnodizedFinish
- High Capacity Fuel Rails
- For Use W/ Pro-Flo XT Manifold #7137
- -6 AN Inlet / Outlet
- Made In The USA
KAI – Fuel Tank Lock Ring (Part No.SPILO28)
from
$13.99
New Standard Replacement Fuel Tank Lock Ring Hardware, Includes Gasket And Screws
Product Features:
See More
Product Features:
- Includes Gasket And Screws
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Spectre – Sbc Blk Off Plate W/Bolts (Part No.42463)
from
$12.99
Spectre’s triple chrome plated Fuel Pump Block Off Plate was designed for small block Chevrolet engines. Engineered for optimum fit and function, this kit includes a block off plate gasket and chrome mounting bolts with washers.
Product Features:
See More
Product Features:
- Necessary if switching to electric fuel pump
- Includes block off plate gasket
- Includes chrome mounting bolts with washers
- Triple chrome plated
Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-814)
from
$24.49
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.
Product Features:
See More
Product Features:
- Cover Hole In Block When Mech. Fuel Pump Is Removed
ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)
from
$12.29
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Properly Aligned
- Conventional Hex Heads
- Rust-Proof Stainless Bolts
- 170,000 PSI
Mr. Gasket – Fuel Pump Mounting Plate (Part No.1514)
from
$16.99
Ideal for mounting a stock original equipment pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Comes With Gasket
Spectra Premium – Fuel Pump Tank Seal (Part No.LO28)
from
$11.29
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel pump seals meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Designed to OE fit, form and function
- Application specific design ensure a perfect fit guarantee
- OEM design ensures corrosion resistance and prevents leakage
- Manufactured with high quality material, ensuring the durability of this part to prevent costly leaks
- Rigorous ISO quality control process
ARP Auto Racing – Chrome Moly (Part No.134-8701)
from
$22.79
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you
Product Features:
See More
Product Features:
- Made From Premium Grade Aerospace Chrome Moly
- Center Less Ground To Precise Diameter
- Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
- Provide With Required Reliability And Improved Performance
Dorman – Fuel Sending Unit Without Pump (Part No.692-209)
from
$79.99
This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications
- Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Spectra Premium – Fuel Tank Sending Unit (Part No.FG84A)
from
$109.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel sending units meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Precision tested fuel level sensors ensures vehicles fuel gage will provide an accurate reading at any fuel level
- Includes strainers for smoother installation process and ensures a clean fuel system upon replacement
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Manufactured with high quality material, ensuring the durability of this part to prevent costly repairs
Carquest Premium – Fuel Cap: 10623, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10623)
from
$12.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Fuel Cap: 10806, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10806)
from
$8.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10491)
from
$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Spectra Premium – Fuel Tank Strap (Part No.ST31)
from
$48.49
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
- Direct fit ensures safe, secure fuel tank installation
- Product individually packaged and labeled to help reduce product damage prior to installation
- Industry leading coverage on straps for plastic tanks
KAI – Fuel Tank Strap (Part No.TNKST31)
from
$73.99
New Standard Replacement Fuel Tank Strap Kit, 33 1/2 Inch And 31 3/4 Inch Straps, Pair
Product Features:
See More
Product Features:
- 33 1/2 Inch And 31 3/4 Inch Straps
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fuel Tank Strap (Part No.FST010031)
from
$39.99
New Platinum Pro Fuel Tank Straps
Product Features:
See More
Product Features:
- Pair
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Holley – High-Flow Mechanical Fuel Pump for Street Performance (Part No.12-834)
from
$124.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- Street Performance
- Flows 80 gph Free Flow
- Shutoff Pressure Pre-Set 7.5 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 1/4 in. NPT
- Inlet/Outlet Tapped For .25 in. NPT
Mr. Gasket – Electric Fuel Pump (Part No.12S)
from
$64.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer or Booster Pump
- Not designed for use on aircraft of any type.
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
KAI – Fuel Pump Module Assembly (Part No.FMD010083)
from
$59.99
New Platinum Pro Fuel Pump Module
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Spectra Premium – Fuel Tank and Pump Assembly Combination (Part No.GM28BFI)
from
$809.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium classic injection fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Application specific design ensure a perfect fit guarantee
- OEM, fit, form and function paired with todays fuel injection technology
- Fuel tanks made with corrosion resistant OEM approved Ni Terne steel
- Proudly manufactured in Canada under stringent quality systems (ISO 9002)
- Unit is leak tested after production to ensure product is free from fuel and / or evaporative leaks
Spectra Premium – Fuel Tank (Part No.GM28B)
from
$291.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Lock ring included with each tank to reduce installation time and to ensure a complete repair
- Made with corrosion resistant, OE approved, Ni Terne steel for durability
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
Dorman – Fuel Tank (Part No.576-256)
from
$606.99
This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.
Product Features:
See More
Product Features:
- Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
- Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
- Quality assured – this part has been validated to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
Spectra Premium – Fuel Tank and Pump Assembly Combination (Part No.GM28AFI)
from
$885.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium classic injection fuel tanks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Application specific design ensure a perfect fit guarantee
- OEM, fit, form and function paired with todays fuel injection technology
- Fuel tanks made with corrosion resistant OEM approved Ni Terne steel
- Proudly manufactured in Canada under stringent quality systems (ISO 9002)
- Unit is leak tested after production to ensure product is free from fuel and / or evaporative leaks
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Popular 1956 Chevrolet One-Fifty Series Fuel and Emissions Systems Categories
1956 Chevrolet One-Fifty Series Fuel and Emissions Systems
You count on your 1956 Chevrolet One-Fifty Series to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 36 Fuel and Emissions Systems ranging in price from $2.99 to $885.99, you’re sure to find everything you need for your 1956 Chevrolet One-Fifty Series.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 10 different brands like Felpro, Mr. Gasket, and Carquest Premium. 1956 Chevrolet One-Fifty Series Fuel and Emissions Systems start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 148 extensive product reviews on 1956 Chevrolet One-Fifty Series Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Sbc Blk Off Plate W/Bolts with 4.0 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1956 Chevrolet One-Fifty Series below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1956 Chevrolet One-Fifty Series
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1956 Chevrolet One-Fifty Series running right for years to come. In our inventory you’ll find brands like Felpro, Mr. Gasket, Carquest Premium, and even more.
Popular Carquest Premium Fuel and Emissions Systems
You’ll find popular Carquest Premium brand products across Fuel Pumps and Gas Caps. All are waiting to get your 1956 Chevrolet One-Fifty Series back on the road. Some of the top-rated Carquest Premium products in these categories are:
Top-Rated Mr. Gasket Fuel and Emissions Systems
If Mr. Gasket are what you’re looking for, our inventory holds plenty. We stock Mr. Gasket brand Fuel and Emissions Systems for your 1956 Chevrolet One-Fifty Series, and some of our most reviewed Mr. Gasket parts include:
FAQs for 1956 Chevrolet One-Fifty Series Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1956 Chevrolet One-Fifty Series?
Out of 36 Fuel and Emissions Systems for the 1956 Chevrolet One-Fifty Series, the most popular in our inventory are:
What are the top-rated 1956 Chevrolet One-Fifty Series Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1956 Chevrolet One-Fifty Series based on customer reviews/ratings are:
from
$12.99
(1)
Sbc Blk Off Plate W/Bolts
“application chart said it wouldnt fit 92 chevy 5.7 but it does”
