1956 Cadillac Series 60 Fleetwood Performance and Racing Products

Essential Performance and Racing Products for 1956 Cadillac Series 60 Fleetwoods

Edelbrock – Reman Thunder AVS Carb #18129 800 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.18129)

Reman Thunder AVS Carb #18129 800 CFM With Manual Choke, Satin Finish (Non-EGR)

from

$413.99
Product Features:
  • Satin Finish
  • 4 Barrel
  • Aluminum Body Material
  • Manual Choke Type
  • 800 cfm Maximum Flow Rating
See More

Edelbrock – Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)

Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

from

$498.99
The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Electric Choke
  • 4 Barrel Count
  • Square Bore
  • Electric Choke Installed from Factory
  • Smooth Secondary Transition
  • Includes Only Timed Vacuum Port
  • Includes EGR ; Fuel Vapor Outlet
See More

Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)

Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

from

$394.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Manual Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)

Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR)

from

$407.99
Product Features:
  • Satin Finish
  • 4 Barrel
  • Annular Booster Type
  • Manual Choke Type
  • 750 cfm Maximum Flow Rating
See More

Edelbrock – CARBURETOR (Part No.14054)

CARBURETOR

from

$488.99
Product Features:
  • EnduraShine Finish
  • GM/AMC-Style Throttle Linkage
  • Can Add Electric Choke PN[1478]
  • Easy Tuning with 2-Piece Design
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Accel – Distributor Cap And Rotor Kit (Part No.8124)

Distributor Cap And Rotor Kit

from

$48.49


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

Super Stock Replacement Coil for Improved Performance, Starting, and Power

from

$42.49
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Product Features:
  • 42000 Volts
  • Effective To 6500 RPM
  • Quicker Starting
  • Improved Throttle Response
  • Higher RPM Power
  • Can Finished In Yellow
See More

MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

Blaster 2 Coil: High Performance Ignition Upgrade

from

$49.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

Product Features:
  • Improved output coil for electronic ignitions
  • Works w/Blaster Ignition Or MSD 5/6/7 Series
  • Ballast Resistor Required If Used w/Stock Points Ignition
  • Alkyd tower w/high dielectric properties lessens carbon tracking
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

Accel – Supercoil (Part No.140001)

Supercoil

from

$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:
  • Oil Filled For Better Cooling
  • Optimized Low Resistance
  • Silicon Magnetic Steel E-Core
  • Higher Energy/Voltage Outputs
  • Quicker Starts
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Lakewood – Trans Mount: Urethane-Chevy (Part No.24350)

Trans Mount: Urethane-Chevy

from

$84.99
Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.

Product Features:
  • Durable Polyurethane
  • Absorbs Vibration
  • Last Longer Than Rubber
  • Built-In Safety Lock
See More

Mr. Gasket – Alternator Bracket (Part No.9850)

Alternator Bracket

from

$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

Product Features:
  • Chrome Plated Steel
  • F-Style
  • Heavy Gauge Steel Construction
  • Fits Small Block Chevy 265-400 CID
  • Must Be Used With Part 9852
See More

Upgrade your 1956 Cadillac Series 60 Fleetwood with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1956 Cadillac Series 60 Fleetwood, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Performance and Racing Products are key to keeping your Series 60 Fleetwood functioning at its best. At Advance Auto Parts, we offer a wide selection of 7 Performance and Racing Products for the 1956 Cadillac Series 60 Fleetwood, designed to meet your needs without breaking the bank. From Performance Transmission replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1956 Cadillac Series 60 Fleetwood at great prices. Our Performance and Racing Products inventory for this model ranges from just $25.99 to $428.99, with an average price of $161.70. Our 7 Performance and Racing Products in stock come from 4 trusted brands, so you’re sure to find the right part for your 1956 Cadillac Series 60 Fleetwood without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1956 Cadillac Series 60 Fleetwood, we stock popular OEM and aftermarket Performance and Racing Products from top names like Accel, Edelbrock, Mr. Gasket, and more. Accel Performance and Racing Products start at just $42.49 and boast an impressive 4 stars average rating from customers. Edelbrock and Mr. Gasket also bring quality to the table, with Performance and Racing Products available starting at $25.99, and at an average 4 stars rating. With 122 customer reviews and counting, our 1956 Cadillac Series 60 Fleetwood Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1956 Cadillac Series 60 Fleetwood is always ready to roll. We’re committed to providing you with everything you need to keep your Series 60 Fleetwood in top shape, all in one place. Start shopping confidently below for your 1956 Cadillac Series 60 Fleetwood!

Best-Selling Performance Transmissions for 1956 Cadillac Series 60 Fleetwoods

Enhance the driving experience in your Cadillac with 1 quality Performance Transmission components, starting at $84.99.

Lakewood – Trans Mount: Urethane-Chevy (Part No.24350)

Trans Mount: Urethane-Chevy

from

$84.99
Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.

Product Features:
  • Durable Polyurethane
  • Absorbs Vibration
  • Last Longer Than Rubber
  • Built-In Safety Lock
See More

Most Popular 1956 Cadillac Series 60 Fleetwood Performance Ignition Products

Customize your Cadillac with 2 Performance Ignition Products products like Performance Coils, all priced under $105.99.

Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

Super Stock Replacement Coil for Improved Performance, Starting, and Power

from

$42.49
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Product Features:
  • 42000 Volts
  • Effective To 6500 RPM
  • Quicker Starting
  • Improved Throttle Response
  • Higher RPM Power
  • Can Finished In Yellow
See More

Accel – Supercoil (Part No.140001)

Supercoil

from

$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:
  • Oil Filled For Better Cooling
  • Optimized Low Resistance
  • Silicon Magnetic Steel E-Core
  • Higher Energy/Voltage Outputs
  • Quicker Starts
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Top Picks for 1956 Cadillac Series 60 Fleetwood Performance Exhaust Products

Upgrade Cadillac Series 60 Fleetwoods with top-quality Performance Exhaust Products parts, including 1 OEM and aftermarket selections for your 1956 model.

Mr. Gasket – Alternator Bracket (Part No.9850)

Alternator Bracket

from

$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

Product Features:
  • Chrome Plated Steel
  • F-Style
  • Heavy Gauge Steel Construction
  • Fits Small Block Chevy 265-400 CID
  • Must Be Used With Part 9852
See More

In-Demand Performance Fuel Systems for 1956 Cadillac Series 60 Fleetwoods

Select from 2 premium Performance Fuel Systems parts for your 1956 Cadillac Series 60 Fleetwood, with prices ranging from $394.99 to $428.99.

Edelbrock – Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1406)

Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

from

$428.99
The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Electric Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)

Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

from

$394.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Manual Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Most Sold 1956 Cadillac Series 60 Fleetwood Performance Distributors

Explore our best-selling Cadillac parts for the 1956 Series 60 Fleetwood among 1 OEM and aftermarket options starting from $48.49.

Accel – Distributor Cap And Rotor Kit (Part No.8124)

Distributor Cap And Rotor Kit

from

$48.49


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Top-Rated Performance and Racing Products Brands For Your 1956 Cadillac Series 60 Fleetwood

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1956 Cadillac Series 60 Fleetwoods. Below you’ll find some of our best rated Performance and Racing Products from Accel, Edelbrock, and Mr. Gasket, and more. Performance and Racing Products from these brands that fit a 1956 Series 60 Fleetwood start at just $25.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Accel 1956 Cadillac Series 60 Fleetwood Performance and Racing Products

When it comes to maintaining or upgrading your 1956 Cadillac Series 60 Fleetwood, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Accel ticks all of those boxes. We offer a wide selection of Accel Performance and Racing Products, specifically designed for the 1956 Cadillac Series 60 Fleetwood. With over 3 Accel brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $42.49, with an average price of just $65.66. Plus, with over 55 customer reviews and an average rating of 4 stars, you can trust that our Accel Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Supercoil
from
$105.99
This product is not rated

Supercoil

“”

Distributor Cap And Rotor Kit
from
$48.49

(1)

Distributor Cap And Rotor Kit

“Great product and good price”

Popular Edelbrock 1956 Cadillac Series 60 Fleetwood Performance and Racing Products

Edelbrock auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1956 Cadillac Series 60 Fleetwood owner should feel confident when installing genuine Edelbrock parts in their vehicle. To ensure the best fit and performance for your 1956 Series 60 Fleetwood, Advance Auto Parts carries a full inventory of 2 Edelbrock Performance and Racing Products. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Edelbrock Performance and Racing Products range from $394.99 to $428.99, plus, with more than 65 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
from
$428.99

(55)

Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

“Great American Company. Great product!”

Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
from
$394.99

(10)

Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

“i have delt with every auto parts dealer there is and advance allways treats me like im their only custemer, thanks guys and gals!!!”

FAQs for 1956 Cadillac Series 60 Fleetwood Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1956 Cadillac Series 60 Fleetwoods?

Out of 7 Performance and Racing Products that fit 1956 Cadillac Series 60 Fleetwoods, the following parts are the top sellers:

What’s the price range for 1956 Cadillac Series 60 Fleetwood Performance and Racing Products?

Performance and Racing Product prices for the 1956 Cadillac Series 60 Fleetwood start at $25.99 and go up to $428.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1956 Cadillac Series 60 Fleetwood?

The average price for Performance and Racing Products for the 1956 Cadillac Series 60 Fleetwood is $161.70. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Cadillac Series 60 Fleetwood model years?

Yes, we currently carry Performance and Racing Products for 14 model years of Cadillac Series 60 Fleetwoods between 1950 and 1964. Performance and Racing Products are bought most frequently for the following model years: 1964, 1963, 1962, 1961, 1960, 1959, 1958, 1957, and 1955.

What are the cheapest Performance and Racing Products for my 1956 Cadillac Series 60 Fleetwood?

The cheapest 1956 Cadillac Series 60 Fleetwood Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 1956 Cadillac Series 60 Fleetwood?

Out of 122 reviews by customers, our 1956 Cadillac Series 60 Fleetwood Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1956 Cadillac Series 60 Fleetwood and their top-rated products:

What types of Performance and Racing Products do you sell for my 1956 Cadillac Series 60 Fleetwood?

As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1956 Cadillac Series 60 Fleetwood:

Can I get help with 1956 Cadillac Series 60 Fleetwood Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Performance and Racing Products and more.

What is your return policy for Cadillac Series 60 Fleetwood Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Cadillac Series 60 Fleetwood Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.