1955 GMC FM350 Valve Cover and Cylinder Heads
More 1955 GMC FM350 Valve Cover and Cylinder Heads
Find your specific 1955 GMC FM350 original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1955 GMC FM350 Valve Cover and Cylinder Heads
ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)
from
$59.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.
Product Features:
See More
Product Features:
- Made Of 8740 Chrome Moly Forgings
- Heat Treated To 180,000 PSI
- Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
- Lengths Are Exact Designed To Provide Positive Seating Every Time
- Set of 16
- .800″ Adjuster Thread Length
- 3/8-24 Shank Diameter and Thread
- 3/8″ Typical Small Block Application
ARP Auto Racing – ARP Rocker Arm Stud Kit (Part No.234-7201)
from
$99.99
ARP rocker studs are concentric within .005″, extra-large radius base offers greater resistance to flex. Note: To be used ONLY with ARP’s patented Perma-Loc adjusters. Made of 8740 chrome moly forgings and heat-treated to 180,000 PSI. Tip ground flush for optimum adjuster seating.
Product Features:
See More
Product Features:
- 7/16″-14 Thread Size(s)
- .700″ Thread Length
- 8740 Chromoly
- 1.75″ Effective Stud Length
- Set of 16
- .800″ Adjuster Thread Depth
- 3/8″-24 Shank Diameter and Thread
- 3/8″ Typical Small Block Application
- Black Oxide
Felpro – Engine Valve Cover Load Spreader Set (Part No.ES 72676)
from
$34.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Edelbrock – Small-Block Chevy E-Series Cylinder Head E-210 Hydraulic Roller Cam (Part No.5087)
from
$1575.99
The Edelbrock #5087 E-210 Cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased ai
Product Features:
See More
Product Features:
- Complete Pair For Mechanical Flat Tappet
- 64cc Combustion Chamber Volume
- 210cc Intake/75cc Exhaust Runner Volume
- 2.08 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.562 in. Deck Thickness
Edelbrock – Small-Block Chevy E-Street Cylinder Head 70cc Pair (Part No.5073)
from
$1268.99
The Edelbrock #5073 E-Street cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and
Product Features:
See More
Product Features:
- Complete Pair For Hydraulic Flat Tappet
- 70cc Combustion Chamber Volume
- 2.02cc Intake/60cc Exhaust Runner Volume
- 2.02 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.562 in. Deck Thickness
Edelbrock – E-CNC Small-Block Chevy 64cc Cylinder Head Hydraulic Flat Tappet Cam (Part No.79899)
from
$873.99
The Edelbrock part #79899 Small Block Chevy E-CNC cylinder heads offer the ultimate performance. These cylinder heads are fully CNC ported for maximum horsepower and torque, making them ideal for high-performance’s street and racing applications. They als
Product Features:
See More
Product Features:
- Complete Single For Hydraulic Flat Tappet
- 64cc Combustion Chamber Volume
- 185cc Intake/75cc Exhaust Runner Volume
- 2.02 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.562 in. Deck Thickness
Edelbrock – E-Tec-200 Small-Block Chevy Cylinder Head Hydraulic Flat Tappet Cam (Part No.60989)
from
$891.99
Product Features:
See More
- 64cc combustion chamber with 200cc intake runner
- 2.02 in. intake and 1.60 in. exhaust valves
- Flat Tappet Camshaft Type
- Exhaust And Intake 45 Degree Seat Angle
- Sold as one complete head
ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)
from
$316.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.
Product Features:
See More
Product Features:
- 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
- 8740 Chromoly
- Black Oxide
- Small Block Chevy
- Sold As A Kit
Sealed Power – Engine Push Rod (Part No.RP-3028)
from
$2.49
Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
See More
Edelbrock – Valve Seat for S/B Chevy heads with 1.60" Valves (Part No.9710)
ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)
from
$155.99
All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.
Product Features:
See More
Product Features:
- Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
- Nominally Rated At 200,000 Psi Tensile Strength
- These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
- Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs
ARP Auto Racing – For Use With Oem Cylinder Heads/ Most Edelbrock, 12Point Head, 180000Psi Tensile (Part No.134-3701)
from
$119.99
All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.
Product Features:
See More
Product Features:
- Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
- Nominally Rated At 200,000 PSI Tensile Strength
- These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
- Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs
ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Chrome Moly, With Washers (Part No.134-3601)
from
$109.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.
Product Features:
See More
Product Features:
- High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
- Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
- Rated At 180,000 PSI Tensile Strength
- High Performance Head Bolts Are Stronger
ARP Auto Racing – For Use Wit 2003 And Earlier Gen Iii/Ls Series Smal Block, Hex Head, Chrome Moly (Part No.134-3609)
from
$249.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.
Product Features:
See More
Product Features:
- High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
- Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
- Rated At 180,000 Psi Tensile Strength
- High Performance Head Bolts Are Stronger
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)
from
$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Popular 1955 GMC FM350 Valve Cover and Cylinder Heads Categories
1955 GMC FM350 Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 1955 GMC FM350. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 18 different Valve Cover and Cylinder Heads in our inventory ranging from $0.43 to $1,575.99. That means you can find the exact parts or products you need to keep that 1955 GMC FM350 running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1955 GMC FM350. Sealed Power, ARP Auto Racing, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 1955 GMC FM350, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 1955 GMC FM350 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 1955 GMC FM350 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1955 GMC FM350 demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your FM350 the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
Popular Edelbrock Valve Cover and Cylinder Heads
We carry Edelbrock parts in our stock across Cylinder Heads categories, plus more. For a 1955 GMC FM350, our most popular Edelbrock Valve Cover and Cylinder Heads include:
from
$990.99
(1)
RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam
Cylinder Heads
FAQs for 1955 GMC FM350 Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 1955 GMC FM350?
Out of 18 Valve Cover and Cylinder Heads for the 1955 GMC FM350, the most popular in our inventory are:
from
$119.99
This product is not rated
For Use With Oem Cylinder Heads/ Most Edelbrock, 12Point Head, 180000Psi Tensile
Cylinder Head Bolt Sets
