1955 GMC F370 Belts and Hoses
Find Your Specific 1955 GMC F370 Belts and Hoses
Below you will find various in-demand GMC Belts and Hoses, components and accessories for your 1955 F370. Advance Auto Parts has popular F370 parts like Serpentine and V Belts Oil Cooler Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other F370 model years including
1951,
1952,
1953,
1954,
1956,
1957,
1958,
1959 and more. Select a category of 1955 GMC F370 Belts and Hoses below and start saving instantly.
Popular 1955 GMC F370 Belts and Hoses Categories
Essential Belts and Hoses for 1955 GMC F370s
Gates – FleetRunner Heavy-Duty V-Belt (Part No.9720HD)
from
$67.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- The patented material provides optimal performance at extremely high operating temperatures.
- Construction that resists cracking, wear, oil and heat
- The special compound provides unprecedented flexibility, stability, load-bearing capacity and belt life.
- Unique under-cord notch pattern provides greater flexibility for smaller diameter pulleys
- Problem solver for failed disks
- Designed to save your fleet money and reduce downtime
- Meets RMA oil and heat resistance standards and static conductivity requirements
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR28454)
from
$51.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stress, especially on small-diameter pulleys, while dissipating heat.
- High-modulus, high-strength pull cord
- Oil and heat resistant construction
- Meets SAE J636b and SAE J637 specifications
- Meets RMA oil and heat resistant standards and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand joined V-belts
Gates – Tri-Power Classical Section Molded Notch V-Belt (Part No.BX65)
from
$37.99
Product Features:
See More
- Belt edge is machined for even pulley groove contact, resulting in less slippage and wear for smoother running
- Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
- Rubber compound with crossed fibers for greater flexibility and stability.
- The notches molded into the belt during manufacturing make this belt very suitable for drives with smaller diameter pulleys
- Meets RMA standards for oil and heat resistance and static conductivity requirements
- Temperature Range: -58 Deg. F to +248 Deg. F (-50 Deg. C to +120 Deg. C)
- Note: Available in AX, BX, and CX sections as well as Tri-Power PowerBand enclosed V-belts.
Gates – Automotive XL High Capacity V-Belt (Part No.7508)
from
$30.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber mount adds flexibility along the belt and provides greater lateral stability on the pulley
- Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
- Thermoactivated pull cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather, and decay to improve belt life
- Meets or exceeds SAE J636C specifications
Gates – Automotive XL High Capacity V-Belt (Part No.9360)
from
$26.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resistant to oil, heat, ozone, weathering, and aging for better belt life.
- Meets or exceeds SAE J636C specifications
Gates – FleetRunner Heavy-Duty V-Belt (Part No.9360HD)
from
$38.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Proprietary material provides maximum performance at extremely long operating temperatures
- Crack, wear, oil, and heat resistant construction
- Special compound provides unmatched stability, load carrying capacity and belt life
- Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
- Problem solver for troubled drives
- Engineered to save your fleet money and reduce downtime
- Meets RMA standards for oil and heat resistance and static conductivity requirements
Gates – Automotive XL High Capacity V-Belt (Part No.7640)
from
$42.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally active pull cords for maintenance-free operation when the strap is properly installed and tensioned
- Resists oil, heat, ozone, weather, and decay to improve belt life
- Meets or exceeds SAE J636C specifications
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR28437)
from
$49.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stress, especially on small-diameter pulleys, while dissipating heat.
- High-modulus, high-strength pull cord
- Oil and heat-resistant construction throughout
- Meets SAE J636b and SAE J637 specifications
- Meets RMA standards for oil and heat resistance and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand attached V-belts
Gates – Automotive XL High Capacity V-Belt (Part No.9720)
from
$56.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
- Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
- Thermoactivated pull cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather, and decay to improve belt life
- Meets or exceeds SAE J636C specifications
Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)
from
$59.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
Upgrade your 1955 GMC F370 with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1955 GMC F370, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Belts and Hoses are key to keeping your F370 functioning at its best. At Advance Auto Parts, we offer a wide selection of 5 Belts and Hoses for the 1955 GMC F370, designed to meet your needs without breaking the bank.
From
Serpentine and V Belt
replacements to
Oil Cooler Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1955 GMC F370 at great prices.
Our Belts and Hoses inventory for this model
ranges from just $30.49 to $67.99, with
an average price of $52.49.
Our 5 Belts and Hoses in stock come from 2 trusted brands, so you’re sure to find the right part for your 1955 GMC F370 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1955 GMC F370 is always ready to roll. We’re committed to providing you with everything you need to keep your F370 in top shape, all in one place.
Start shopping confidently below for your 1955 GMC F370!
Best-Selling Serpentine and V Belts for 1955 GMC F370s
Enhance the driving experience in your GMC with 3 quality Serpentine and V Belt components, starting at $30.49.
Gates – Automotive XL High Capacity V-Belt (Part No.9720)
from
$56.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
- Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
- Thermoactivated pull cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather, and decay to improve belt life
- Meets or exceeds SAE J636C specifications
Gates – FleetRunner Heavy-Duty V-Belt (Part No.9720HD)
from
$67.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- The patented material provides optimal performance at extremely high operating temperatures.
- Construction that resists cracking, wear, oil and heat
- The special compound provides unprecedented flexibility, stability, load-bearing capacity and belt life.
- Unique under-cord notch pattern provides greater flexibility for smaller diameter pulleys
- Problem solver for failed disks
- Designed to save your fleet money and reduce downtime
- Meets RMA oil and heat resistance standards and static conductivity requirements
Gates – Automotive XL High Capacity V-Belt (Part No.7508)
from
$30.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber mount adds flexibility along the belt and provides greater lateral stability on the pulley
- Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
- Thermoactivated pull cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather, and decay to improve belt life
- Meets or exceeds SAE J636C specifications
Most Popular 1955 GMC F370 Oil Cooler Hoses
Customize your GMC with 2 Oil Cooler Hoses products
like Engine Oil Cooler Hoses, all
priced under $59.99.
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)
from
$59.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
FAQs for 1955 GMC F370 Belts and Hoses
Which Belts and Hoses are best-sellers for 1955 GMC F370s?
Out of 5 Belts and Hoses that fit 1955 GMC F370s, the following parts are the top sellers:
- 1/2" x 12′ Engine Oil Cooler Hose (19230057) – $48.99
- Metal Line Kit for Engine Oil Coolers (19230068) – $59.99
- Automotive XL High Capacity V-Belt (11084360) – $56.99
What’s the price range for 1955 GMC F370 Belts and Hoses?
Belts and Hose prices for the 1955 GMC F370 start at $30.49 and go up to $67.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 1955 GMC F370?
The average price for Belts and Hoses for the 1955 GMC F370 is $52.49. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other GMC F370 model years?
What are the cheapest Belts and Hoses for my 1955 GMC F370?
The cheapest 1955 GMC F370 Belts and Hoses we carry in stock are:
- Automotive XL High Capacity V-Belt (11520422) – $30.49
- 1/2" x 12′ Engine Oil Cooler Hose (19230057) – $48.99
- Automotive XL High Capacity V-Belt (11084360) – $56.99
- Metal Line Kit for Engine Oil Coolers (19230068) – $59.99
- FleetRunner Heavy-Duty V-Belt (10913030) – $67.99
What types of Belts and Hoses do you sell for my 1955 GMC F370?
As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 1955 GMC F370:
Can I get help with 1955 GMC F370 Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Belts and Hoses and more.
What is your return policy for GMC F370 Belts and Hoses?
Advance Auto Parts keeps returns simple. For new GMC F370 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
