1955 Chevrolet Truck Ignition and Tune-Up Products

Essential 1955 Chevrolet Truck Ignition and Tune-Up Products

PerTronix – D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit (Part No.D9010)

D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit

from

$10.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:
  • PerTronix D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit
  • These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
See More

PerTronix – 11830 Module replacement (only) (one module) for 1183 Ignitor Kit (Part No.11830)

11830 Module replacement (only) (one module) for 1183 Ignitor Kit

from

$109.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ign

Product Features:
  • PerTronix 11830 Module replacement (only) (one module) for 1183 Ignitor Kit
  • Replacement Parts (only) for Ignitor and Ignitor II Kits
See More

ACDelco – Ignition Capacitor (Part No.D203)

Ignition Capacitor

from

$21.79
ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Accel – 7Mm Super Stock Copper Uni (Part No.3008)

7Mm Super Stock Copper Uni

from

$53.09
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm Yellow Silicone Jacket
  • Street-driven Applications
  • Copper Core
  • Orange Spark Plug Boots
  • Pre HEI Vehicles
  • Universal Wire Set
See More

Carquest – Contact Set (Points) (Part No.A120V)

Contact Set (Points)

from

$24.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
  • Thermoplastic housing withstands heat stress for enhanced durability
  • Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
  • External core made from oriented silicon steel ensures durability and longevity
  • Stainless steel spring resists corrosion
See More

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.403)

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration

from

$3.49
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Guaranteed to deliver quick starts, good fuel economy and smooth acceleration, Autolite Copper Core spark plugs are designed to meet or exceed OES design requirements. Consider upgrading to Autolite Platinum, Double Platinum or Iridium XP plugs for improved engine performance. Copper core plugs are the industry standard.

Product Features:
  • Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
  • Multi-rib insulator reduces danger of “flash-over”
  • One-piece terminal post adds strength
  • Resistor reduces radio frequency interference (RFI) and electrode erosion
See More

MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)

Distributor Gear; MSD Chevy Distributor; .500 ID; Iron

from

$54.39
This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Micro Polished Surface For Smooth Contact
  • Proprietary formulated ductile iron.
  • Melonite QPQ coated reduces friction and initial wear
  • Interstitial carbide improves wear resistance/running properties
See More

Mallory – Universal Street Performance Ignition Coil (Part No.29219)

Universal Street Performance Ignition Coil

from

$76.99
Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.

Product Features:
  • 12 Volt Coil
  • Oil-Filled Design
  • Arch Resistant Alkyd Top
  • Designed To Deliver Optimum Performance
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8328)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$35.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Felpro – DISTRIBUTOR MOUNTING GASKET (Part No.70194)

DISTRIBUTOR MOUNTING GASKET

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Carquest Premium – Ignition Coil Mounting Bracket (Part No.MBA1001)

Ignition Coil Mounting Bracket

from

$11.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6326)

Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit

from

$46.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8139)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$40.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

MSD Ignition – Trigger Wheel; Flying Magnet; Small Block Chevy (Part No.8611)

Trigger Wheel; Flying Magnet; Small Block Chevy

from

$290.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:
  • Replacement crank trigger wheel for small block Chevy
  • Absolutely the most accurate way to trigger the ignition
  • The non-magnetic pickup cannot be false triggered
  • Powerful magnets are embedded in a billet aluminum trigger wheel
See More

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100711)

Flame-Thrower Electronic Distributor Billet

from

$357.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:
  • PerTronix D100711 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Vacuum Advance Red Male Cap
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
See More

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100811)

Flame-Thrower Electronic Distributor Billet

from

$391.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:
  • PerTronix D100811 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Non Vacuum Advance Red Male Cap
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
See More

Carquest – Distributor Rotor (Part No.23A1019)

Distributor Rotor

from

$5.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest Premium – Distributor Rotor (Part No.DAA1023)

Distributor Rotor

from

$7.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Switch (Part No.SBC1311)

Ignition Switch

from

$36.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)

8Mm Super Stock Spiral Uni Bk

from

$91.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 8mm High Gloss Silicone Jacket
See More

ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9508N)

Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core

from

$63.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040K)

Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set

from

$65.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450° F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
See More

PerTronix – D650710 Cap Male Black 8 cylinder Flame-Thrower Billet Distributor (Part No.D650710)

D650710 Cap Male Black 8 cylinder Flame-Thrower Billet Distributor

from

$51.99
Replacement distributor cap for Flame-Thrower distributors. High dielectric strength cap with male or female brass terminals.

Product Features:
  • PerTronix D650710 Cap Male Black 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap for Flame-Thrower distributors.
See More

PerTronix – D650711 Cap Male Red 8 cylinder Flame-Thrower Billet Distributor (Part No.D650711)

D650711 Cap Male Red 8 cylinder Flame-Thrower Billet Distributor

from

$51.99
Replacement distributor cap for Flame-Thrower distributors. High dielectric strength cap with male or female brass terminals.

Product Features:
  • PerTronix D650711 Cap Male Red 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap for Flame-Thrower distributors.
See More

PerTronix – D650700 Cap Black 8 cylinder Flame-Thrower Billet Distributor (Part No.D650700)

D650700 Cap Black 8 cylinder Flame-Thrower Billet Distributor

from

$41.99
Replacement distributor cap for Flame-Thrower distributors. High dielectric strength cap with male or female brass terminals.

Product Features:
  • PerTronix D650700 Cap Black 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap for Flame-Thrower distributors.
See More

Carquest Premium – Ignition Conversion Kit (Part No.CBA1702)

Ignition Conversion Kit

from

$359.99
Ignition Conversion Kit

Carquest Premium – Ignition Conversion Kit (Part No.CBA1800)

Ignition Conversion Kit

from

$391.99
Ignition Conversion Kit

Carquest Premium – Ignition Conversion Kit (Part No.CBA1798)

Ignition Conversion Kit

from

$411.99
Ignition Conversion Kit

1955 Chevrolet Truck Ignition and Tune-Up Products

You count on your 1955 Chevrolet Truck to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 76 Ignition and Tune-Up Products ranging in price from $1.49 to $472.99, you’re sure to find everything you need for your 1955 Chevrolet Truck.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 12 different brands like ACDelco, Autolite, and E3. 1955 Chevrolet Truck Ignition and Tune-Up Products start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,708 extensive product reviews on 1955 Chevrolet Truck Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Ignition Coil with 4.5 stars and 7Mm Super Stock Copper Uni with 3.8 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1955 Chevrolet Truck below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 1955 Chevrolet Truck

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1955 Chevrolet Truck running right for years to come. In our inventory you’ll find brands like ACDelco, Autolite, E3, and even more.

Popular Champion Ignition and Tune-Up Products

You’ll find popular Champion brand products across Spark Plugs. All are waiting to get your 1955 Chevrolet Truck back on the road. Some of the top-rated Champion products in these categories are:

Top-Rated ACDelco Ignition and Tune-Up Products


If ACDelco are what you’re looking for, our inventory holds plenty. We stock ACDelco brand Ignition and Tune-Up Products for your 1955 Chevrolet Truck, and some of our most reviewed ACDelco parts include:
Copper Core Spark Plug
from $4.99
(13)
Copper Core Spark Plug
Spark Plugs

FAQs for 1955 Chevrolet Truck Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1955 Chevrolet Truck?

Out of 76 Ignition and Tune-Up Products for the 1955 Chevrolet Truck, the most popular in our inventory are:

What are the top-rated 1955 Chevrolet Truck Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 1955 Chevrolet Truck based on customer reviews/ratings are:
Ignition Coil
from $35.05
(17)
Ignition Coil
“I used this on my 1950 ford tractor.”
7Mm Super Stock Copper Uni
from $53.09
(12)
7Mm Super Stock Copper Uni
“I know the previous users didn’t like the idea of clipping on ends, but I liked them because the core is a tinned copper wire. Works great on Motorcyl”
8Mm Super Stock Spiral Uni Rd
from $101.99
(11)
8Mm Super Stock Spiral Uni Rd
“This product doesn’t say it is compatible with my ’06 LaCroSSe, but I assure you it works. And it added some pep to the old gals giddy up!!”