1954 Studebaker 3R10 Belts and Hoses

Essential Belts and Hoses for 1954 Studebaker 3R10s

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR22380)

Green Stripe« Truck & Bus Series V-Belt

from

$29.49
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus, high strength tensile cord
  • Oil and heat-resistant construction throughout
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand joined V-belts
See More

Gates – Vulco« Straight Coolant Hose (Part No.24020)

Vulco« Straight Coolant Hose

from

$0.99
Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.

Product Features:
  • Heat-resistant cover
  • Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom fit installations
  • Meets SAE 20R1 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25480)

Vulco-Flex« II Flexible Coolant Hose

from

$25.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Upgrade your 1954 Studebaker 3R10 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1954 Studebaker 3R10, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Studebaker or enhancing its overall performance, Belts and Hoses are key to keeping your 3R10 functioning at its best. At Advance Auto Parts, we offer a wide selection of 3 Belts and Hoses for the 1954 Studebaker 3R10, designed to meet your needs without breaking the bank. From Engine Cooling Hose replacements to Serpentine and V Belts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1954 Studebaker 3R10 at great prices. Our Belts and Hoses inventory for this model ranges from just $0.99 to $29.49, with an average price of $18.66. Our 3 Belts and Hoses in stock come from trusted brands, so you’re sure to find the right part for your 1954 Studebaker 3R10 without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1954 Studebaker 3R10 is always ready to roll. We’re committed to providing you with everything you need to keep your 3R10 in top shape, all in one place. Start shopping confidently below for your 1954 Studebaker 3R10!

Best-Selling Engine Cooling Hoses for 1954 Studebaker 3R10s

Enhance the driving experience in your Studebaker with 2 quality Engine Cooling Hose components, starting at $0.99.

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25480)

Vulco-Flex« II Flexible Coolant Hose

from

$25.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Vulco« Straight Coolant Hose (Part No.24020)

Vulco« Straight Coolant Hose

from

$0.99
Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.

Product Features:
  • Heat-resistant cover
  • Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom fit installations
  • Meets SAE 20R1 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
See More

Most Popular 1954 Studebaker 3R10 Serpentine and V Belts

Customize your Studebaker with 1 Serpentine and V Belts products like V-Belts, all priced under $29.49.

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR22380)

Green Stripe« Truck & Bus Series V-Belt

from

$29.49
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus, high strength tensile cord
  • Oil and heat-resistant construction throughout
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand joined V-belts
See More

FAQs for 1954 Studebaker 3R10 Belts and Hoses

Which Belts and Hoses are best-sellers for 1954 Studebaker 3R10s?

Out of 3 Belts and Hoses that fit 1954 Studebaker 3R10s, the following parts are the top sellers:

What’s the price range for 1954 Studebaker 3R10 Belts and Hoses?

Belts and Hose prices for the 1954 Studebaker 3R10 start at $0.99 and go up to $29.49 for the most premium parts.

What’s the average price of a Belts and Hose for a 1954 Studebaker 3R10?

The average price for Belts and Hoses for the 1954 Studebaker 3R10 is $18.66. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

What are the cheapest Belts and Hoses for my 1954 Studebaker 3R10?

The cheapest 1954 Studebaker 3R10 Belts and Hoses we carry in stock are:

What types of Belts and Hoses do you sell for my 1954 Studebaker 3R10?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1954 Studebaker 3R10:

Can I get help with 1954 Studebaker 3R10 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Studebaker Belts and Hoses and more.

What is your return policy for Studebaker 3R10 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Studebaker 3R10 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.