1951 GMC P150-22 Belts and Hoses

Essential 1951 GMC P150-22 Belts and Hoses

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR22434)

Green Stripe« Truck & Bus Series V-Belt

from

$31.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus, high strength tensile cord
  • Oil and heat-resistant construction throughout
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand joined V-belts
See More
View Product

Gates – Automotive XL« High Capacity V-Belt (Part No.7450)

Automotive XL« High Capacity V-Belt

from

$24.79
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More
View Product

Gates – Premium Molded Coolant Hose (Part No.20145)

Premium Molded Coolant Hose

from

$42.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More
View Product

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More
View Product

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$79.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More
View Product

Gates – Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose (Part No.26502)

Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose

from

$27.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
  • Resistant to heat, oil and ozone
  • Performs to SAE 20R5 Type EC Class D-2 specifications
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • Caution: Do not use for fuel or oil transfer applications.
See More
View Product

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25476)

Vulco-Flex½ II Flexible Coolant Hose

from

$29.49
Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More
View Product

1951 GMC P150-22 Belts and Hoses

You count on your 1951 GMC P150-22 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 6 Belts and Hoses ranging in price from $27.99 to $79.99, you’re sure to find everything you need for your 1951 GMC P150-22.

Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 2 different brands like Imperial and Gates. 1951 GMC P150-22 Belts and Hoses start as low as $27.99!

Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 1951 GMC P150-22 below to get started!

More Popular Parts for All Makes