1950 GMC FP152 Belts and Hoses
Find Your Specific 1950 GMC FP152 Belts and Hoses
Below you will find various in-demand GMC Belts and Hoses, components and accessories for your 1950 FP152. Advance Auto Parts has popular FP152 parts like Radiator Hoses, Transmission Cooler Hoses, Oil Cooler Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other FP152 model years including
1949 and more. Select a category of 1950 GMC FP152 Belts and Hoses below and start saving instantly.
Popular 1950 GMC FP152 Belts and Hoses Categories
Essential Belts and Hoses for 1950 GMC FP152s
Imperial – Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Size: 1/2 in. x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Medium duty applications
Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)
from
$59.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Used on Chevrolet V8 applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Comes with all parts needed for the job
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25476)
from
$27.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- Their high flexibility makes installation easier
- Maximum vehicle coverage with minimal inventory
- Resistant to heat, oil, and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
- Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
- Warning: Do not use for fuel or oil transfer applications
Gates – Premium Molded Coolant Hose (Part No.20145)
from
$40.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-formed for a good fit and to ensure perfectly sealed connections
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transport applications.
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26502)
from
$29.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, which is the primary cause of hose failure
- The built-in spiral steel wire allows for medium-sized curves without creases or folds.
- EPDM tube and Neoprene cover for extended service life
- The polyester fabric reinforcement takes the form of vulcanization without unnecessary stress on the connections.
- Resistant to heat, oil and ozone
- Compliant with SAE 20R5 Type EC Class D-2 specifications
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Caution: Do not use for fuel or oil transfer applications.
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22434)
from
$34.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stresses, especially on small diameter pulleys, while also dissipating heat.
- High modulus and high strength traction cord
- Oil and heat resistant construction
- Meets SAE J636b and SAE J637 specifications
- Meets RMA oil and heat resistant standards and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand joined V-belts
Upgrade your 1950 GMC FP152 with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1950 GMC FP152, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Belts and Hoses are key to keeping your FP152 functioning at its best. At Advance Auto Parts, we offer a wide selection of 8 Belts and Hoses for the 1950 GMC FP152, designed to meet your needs without breaking the bank.
From
Radiator Hose
replacements to
Transmission Cooler Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1950 GMC FP152 at great prices.
Our Belts and Hoses inventory for this model
ranges from just $2.29 to $59.99, with
an average price of $34.72.
Our 8 Belts and Hoses in stock come from 2 trusted brands, so you’re sure to find the right part for your 1950 GMC FP152 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1950 GMC FP152, we stock popular OEM and aftermarket Belts and Hoses from top names
like Imperial, and more.
Imperial Belts and Hoses
start at just $32.49 and boast an impressive 4.1 stars average rating from customers.
With 94 customer reviews and counting, our 1950 GMC FP152 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1950 GMC FP152 is always ready to roll. We’re committed to providing you with everything you need to keep your FP152 in top shape, all in one place.
Start shopping confidently below for your 1950 GMC FP152!
Best-Selling Radiator Hoses for 1950 GMC FP152s
Enhance the driving experience in your GMC with 4 quality Radiator Hose components, starting at $2.29.
Gates – Premium Molded Coolant Hose (Part No.20145)
from
$40.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-formed for a good fit and to ensure perfectly sealed connections
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transport applications.
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26502)
from
$29.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, which is the primary cause of hose failure
- The built-in spiral steel wire allows for medium-sized curves without creases or folds.
- EPDM tube and Neoprene cover for extended service life
- The polyester fabric reinforcement takes the form of vulcanization without unnecessary stress on the connections.
- Resistant to heat, oil and ozone
- Compliant with SAE 20R5 Type EC Class D-2 specifications
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Caution: Do not use for fuel or oil transfer applications.
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25476)
from
$27.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- Their high flexibility makes installation easier
- Maximum vehicle coverage with minimal inventory
- Resistant to heat, oil, and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
- Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
- Warning: Do not use for fuel or oil transfer applications
Gates – Vulco Straight Coolant Hose (Sold by inch) (Part No.24024)
from
$2.29
Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.
Product Features:
See More
Product Features:
- Heat-resistant lid
- Lid marked in 1 inch increments to facilitate approximate cutting lengths, allowing for “custom” installations.
- Compliant with the requirements of SAE 20R1 Wall Class D-2
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: For a maintenance-free connection, use PowerGrip SB clamps
- Caution: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the inch. See store for details.
Most Popular 1950 GMC FP152 Transmission Cooler Hoses
Customize your GMC with 1 Transmission Cooler Hoses products
like Transmission Oil Cooler Hoses, all
priced under $32.49.
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Top Picks for 1950 GMC FP152 Oil Cooler Hoses
Upgrade GMC FP152s with top-quality Oil Cooler Hoses parts, including 2 OEM and aftermarket selections for your 1950 model.
Imperial – Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Size: 1/2 in. x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Medium duty applications
Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)
from
$59.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Used on Chevrolet V8 applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Comes with all parts needed for the job
In-Demand Serpentine and V Belts for 1950 GMC FP152s
Select from 1 premium Serpentine and V Belts parts for your 1950 GMC FP152.
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22434)
from
$34.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stresses, especially on small diameter pulleys, while also dissipating heat.
- High modulus and high strength traction cord
- Oil and heat resistant construction
- Meets SAE J636b and SAE J637 specifications
- Meets RMA oil and heat resistant standards and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand joined V-belts
Top-Rated Belts and Hoses Brands For Your 1950 GMC FP152
Shop for the best-rated brands offering Belts and Hoses and other products for your 1950 GMC FP152s. Below you’ll find some of our best rated Belts and Hoses from Imperial, and more. Belts and Hoses from these brands that fit a 1950 FP152 start at just $32.49 and are rated as high as 4.1 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Imperial 1950 GMC FP152 Belts and Hoses
When it comes to maintaining or upgrading your 1950 GMC FP152, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Belts and Hoses, specifically designed for the 1950 GMC FP152. With over 1 Imperial brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $32.49. Plus, with over 94 customer reviews and an average rating of 4.1 stars, you can trust that our Imperial Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$32.49
(94)
Transmission Oil Cooler Hose
“Great product make sure to get plate mount style other one is pain to mount”
FAQs for 1950 GMC FP152 Belts and Hoses
Which Belts and Hoses are best-sellers for 1950 GMC FP152s?
Out of 8 Belts and Hoses that fit 1950 GMC FP152s, the following parts are the top sellers:
- Engine Oil Cooler Hose (19230057) – $48.99
- Metal Line Kit for Engine Oil Cooler (19230068) – $59.99
- Premium Molded Coolant Hose (10511639) – $40.99
What’s the price range for 1950 GMC FP152 Belts and Hoses?
Belts and Hose prices for the 1950 GMC FP152 start at $2.29 and go up to $59.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 1950 GMC FP152?
The average price for Belts and Hoses for the 1950 GMC FP152 is $34.72. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
What are the cheapest Belts and Hoses for my 1950 GMC FP152?
The cheapest 1950 GMC FP152 Belts and Hoses we carry in stock are:
- Vulco Straight Coolant Hose (Sold by inch) (10911424) – $2.29
- Vulco-Flex II Flexible Coolant Hose (10911534) – $27.99
- Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (10505068) – $29.99
- Transmission Oil Cooler Hose (5670022) – $32.49
- Green Stripe Truck & Bus Series V-Belt (10914304) – $34.99
What are the top-rated Belts and Hoses that fit the 1950 GMC FP152?
Out of 94 reviews by customers, our 1950 GMC FP152 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1950 GMC FP152 and their top-rated products:
- Transmission Cooler Hoses
- Transmission Oil Cooler Hose (5670022) – $32.49
What types of Belts and Hoses do you sell for my 1950 GMC FP152?
As of 3/1/26, these are some of the most in-demand types of Belts and Hoses for a 1950 GMC FP152:
Can I get help with 1950 GMC FP152 Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Belts and Hoses and more.
What is your return policy for GMC FP152 Belts and Hoses?
Advance Auto Parts keeps returns simple. For new GMC FP152 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
