1949 Plymouth Suburban Filters and PCVs
More 1949 Plymouth Suburban Filters and PCVs Categories
If you’re looking for an original Filters and PCVs replacement for a 1949 Plymouth Suburban, you can search through our selection below. You’ll also find aftermarket and OEM Filters and PCVs to meet your needs.
Essential 1949 Plymouth Suburban Filters and PCVs
aFe POWER – PRO DRY S Air Filter: 99.2% Filtration Efficiency, 3 Layer Synthetic, Dry Filter, Street Driving (Part No.11-10017)
from
$68.99
Constructed with 100-percent polyurethane on top and bottom, this non-oiled OE replacement filter provides years of hassle free service. Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.
Product Features:
See More
Product Features:
- Outflows Stock Paper Filters For Improved Horsepower and Torque
- 100% Polyurethane Frame On All Sides For Extra Long Filter Life
- Washable And Reusable For Multiple Cleaning Cycles
- Progressive Bump Seal Design For A Perfect Fit
Carquest Standard – Engine Air Filter: Meets Original Equipment Specifications (Part No.R87020)
from
$8.49
Carquest Standard engine air filters are designed to remove airborne contaminants and optimize engine performance in all driving conditions. Each air filter features cured filter media that increases tensile strength, allowing the filter to maintain high-pressure requirements without collapse. Carquest Standard air filters use a polyurethane construction that provides higher tear strength and more structural support. Our Carquest Standard air filters meet original equipment (O.E.) standards and fulfill the requirements for maintaining a new vehicle warranty.
See More
Carquest Premium – Air Filter (Part No.87040)
from
$13.49
Blocks dust, dirt, bacteria and pollution that can interrupt engine performance. Designed to offer consistent air flow to help increase horsepower and acceleration
Product Features:
See More
Product Features:
- Prescription filtration provides stronger resistance against moisture and collapse from rain and snow
- Optimum pleat count provides a higher filtration function
- Superior protection for vehicles in dusty or dirty environments, snow, high heat/humidity and frequent trips less than 10 miles
FRAM Drive – Engine Air Filter: Standard, Meets or Exceeds Manufacturer Specifications (Part No.FDA160)
from
$11.29
FRAM Drive engine air filter prevents damaging road dust and dirt particles from entering your vehicle’s engine. Replacing your engine air filter every 12 months can help improve acceleration and optimizes overall engine efficiency.
Product Features:
See More
Product Features:
- Proven performance for up to 12 months
- Installs quickly in as little as 5 minutes
- Provides trusted protection by trapping dirt, dust, and other harmful contaminants
Carquest Premium – Engine Oil Filler Cap: 10061, Push Fit, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10061)
from
$12.49
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Carquest Premium – Oil Filler Cap (Part No.10070)
from
$21.99
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Imperial – Remote Mount Filter Kit – Universal (Part No.240291)
from
$95.99
For use when relocating the oil filter is necessary. Includes all required hardware except hoses.
Product Features:
See More
Product Features:
- Remote mount filter kit
- For use when relocation of the oil filter is necessary
- Comes with all necessary hardware except hoses
Accufit – Oil Drain Plug, 5/8"-18 (Part No.ODP-00017B)
from
$5.29
AGS ACCUFIT Oil Drain Plug is a high-coverage/low-part number program that covers up to 93% of all vehicles on the road, including domestic, European, Japanese, British, and Korean models, while reducing inventory and associated costs by 80%. Reducing stocked part numbers to just 13 and the superior quality built-in features make ACCUFIT your number one choice for oil drain plugs. Easy Install – Finger-grip wing for ease of installation. All plugs have 14mm hex – just one wrench works for all! Hi-Temp Gasket – Red hi-temp gasket for max sealing protection. Easy ID – Thread size etched on each plug. Rust Protection – Black oxide coating for rust and corrosion protection. Avoid Cross-Threading – Pilot-point tip to avoid cross-threading during installation.
Product Features:
See More
Product Features:
- Easy Install – Finger-grip wing for ease of installation
- All plugs have 14mm hex – just one wrench works for all
- Hi-Temp Gasket – Red hi-temp gasket for max sealing protection
Dorman – Pilot Point Engine Oil Drain Plug: 1/2 " -20, Unified National Coarse Thread, 9/16 " Head, 1 Pack (Part No.090-052CD)
from
$4.79
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Pilot Point Engine Oil Drain Plug: 1/2-20 Thread, 9/16 " Head, 1 Pack (Part No.69012)
from
$4.29
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Standard Engine Oil Drain Plug: 7/8-14 Thread, 1-1/8" Head (Sold by each) (Part No.090-010)
from
$16.29
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Oil Drain Plug Standard 5/8-18, Head Size 9/16 In. (Part No.65314)
from
$7.49
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Accufit – Oil Drain Plug, 1/2"-20 (Part No.ODP-00016B)
from
$5.29
AGS ACCUFIT Oil Drain Plug is a high-coverage/low-part number program that covers up to 93% of all vehicles on the road, including domestic, European, Japanese, British, and Korean models, while reducing inventory and associated costs by 80%. Reducing stocked part numbers to just 13 and the superior quality built-in features make ACCUFIT your number one choice for oil drain plugs. Easy Install – Finger-grip wing for ease of installation. All plugs have 14mm hex – just one wrench works for all! Hi-Temp Gasket – Red hi-temp gasket for max sealing protection. Easy ID – Thread size etched on each plug. Rust Protection – Black oxide coating for rust and corrosion protection. Avoid Cross-Threading – Pilot-point tip to avoid cross-threading during installation.
Product Features:
See More
Product Features:
- Easy Install – Finger-grip wing for ease of installation
- All plugs have 14mm hex – just one wrench works for all
- Hi-Temp Gasket – Red hi-temp gasket for max sealing protection
Dorman – Standard Engine Oil Drain Plug: 5/8 " -18, Unified National Fine Thread, 9/16 " Head, 1 Pack (Part No.090-024CD)
from
$12.49
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
FRAM Titanium – Spin-on Oil Filter: Ideal For Synthetic Oil Protection to 20,000 miles (Part No.FS8A)
from
$15.99
FRAM Titanium advanced high-flow synthetic oil filters offer ultimate engine protection for up to 20,000 miles (32,000 kilometers). Engineered with premium synthetic blend media, FRAM Titanium provides over 99% dirt trapping efficiency.
Product Features:
See More
Product Features:
- Proven protection for up to 20,000 miles
- Total Grip textured surface for easy install and removal
- Silicone anti-drain back valve helps ensure safe engine start up
- FRAM Powerflow technology allows for efficient oil flow over the filter media
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-3001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Carquest Premium – Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles (Part No.85515)
from
$7.79
Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.
Product Features:
See More
Product Features:
- Protection for up to 10,000 miles
- Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
- Solid metal end caps are designed to be long lasting
- Silicone anti-drain back valve for engine start-up protection
- Heavy-duty steel baseplate provides additional strength to resist leakage
- Heavy gauge steel canister withstands high pressure operating conditions
- Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)
- Meets requirements for maintaining new vehicle warranties
Carquest Premium – By-Pass Lube Element with Bail Handle (Part No.84366)
from
$31.99
Carquest lube filter elements protect your engine from wear particles that can otherwise lead to premature parts failure.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Made in USA
Motorcraft – Original Equipment Oil Filter: Ideal for Any Type Oil, Built To Meet Ford’s Standards (Part No.FL-1A)
from
$14.99
The Motorcraft Original Equipment Oil Filter is designed, engineered and recommended by Ford Motor Company. This filter helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil.
Product Features:
See More
Product Features:
- Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine
- Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged
- Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust
- Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles
Carquest Premium – Full-Flow Lube Spin-on (Also Used as Hydraulic or Transmission) (Part No.85515HD)
from
$13.79
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Contains Anti-Drainback Valve;8 PSID By-Pass Valve; Front End By-Pass Valve
Carquest Premium – Full-Flow Lube Element (Part No.85076)
from
$28.49
Carquest lube filter elements protect your engine from wear particles that can otherwise lead to premature parts failure.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Made in USA
Dorman – Oil Drain Plug Gasket – Nylon Fits 1/2 Inch M12 (sold by each) (Part No.097-022)
from
$1.29
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.
Product Features:
See More
Product Features:
- Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
- Restores functionality – built to restore a proper seal
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Victor Reinz – Engine Oil Drain Plug Gasket (Part No.71-13462-00)
from
$1.99
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dorman – Nylon Drain Plug Gasket, Fits 1/2,M12 (1 In., 25mm Od) (Part No.097-022CD)
from
$4.49
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.
Product Features:
See More
Product Features:
- Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
- Restores functionality – built to restore a proper seal
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Engine Oil Drain Plug Gasket (Part No.70822)
from
$0.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Dorman – Oil Drain Plug Gasket – Nylon Fits 7/8 Inch M22 (sold by each) (Part No.097-005)
from
$1.29
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.
Product Features:
See More
Product Features:
- Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
- Restores functionality – built to restore a proper seal
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Oil Drain Plug Gasket – Nylon Fits 1/2 Inch TO, 5/8 Inch M14 SO, M16 (sold by each) (Part No.097-002)
from
$7.99
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.
Product Features:
See More
Product Features:
- Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
- Restores functionality – built to restore a proper seal
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1949 Plymouth Suburban Filters and PCVs Categories
1949 Plymouth Suburban Filters and PCVs
You count on your 1949 Plymouth Suburban to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Filters and PCVs. With 9 Filters and PCVs ranging in price from $1.29 to $95.99, you’re sure to find everything you need for your 1949 Plymouth Suburban.
Brands matter. If you want to shop a specific Filters and PCVs brand, we stock 5 different brands like Carquest Premium, Imperial, and aFe POWER. 1949 Plymouth Suburban Filters and PCVs start as low as $1.29!
One of the best ways to find top quality OEM or aftermarket Filters and PCVs is by asking professionals. Short of that, you can shop with confidence thanks to our 14 extensive product reviews on 1949 Plymouth Suburban Filters and PCVs. Some of the top-rated Filters and PCVs products we carry are HD By-Pass Lube Cartridge with 5.0 stars.
Did we mention you can order your Filters and PCVs from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Filters and PCVs inventory for your 1949 Plymouth Suburban below to get started!
Top-Rated Filters and PCVs Brands For Your 1949 Plymouth Suburban
Trusted Filters and PCVs OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1949 Plymouth Suburban running right for years to come. In our inventory you’ll find brands like Carquest Premium, Imperial, aFe POWER, and even more.
Popular Carquest Premium Filters and PCVs
You’ll find popular Carquest Premium brand products across Positive Crankcase Ventilation (PCV) Parts. All are waiting to get your 1949 Plymouth Suburban back on the road. Some of the top-rated Carquest Premium products in these categories are:
from
$12.49
(4)
Engine Oil Filler Cap: 10061, Push Fit, Direct Fit, Provides Tight Seal, 1 Pack
Oil Breather Caps
FAQs for 1949 Plymouth Suburban Filters and PCVs
What are the most purchased Filters and PCVs for the 1949 Plymouth Suburban?
Out of 9 Filters and PCVs for the 1949 Plymouth Suburban, the most popular in our inventory are:
from
$68.99
This product is not rated
PRO DRY S Air Filter: 99.2% Filtration Efficiency, 3 Layer Synthetic, Dry Filter, Street Driving
Air Filters
What are the top-rated 1949 Plymouth Suburban Filters and PCVs?
Top-rated Filters and PCVs for your 1949 Plymouth Suburban based on customer reviews/ratings are:
