1946 Jeep Willys Belts and Hoses
More 1946 Jeep Willys Belts and Hoses Categories
If you’re looking for an original Belts and Hoses replacement for a 1946 Jeep Willys, you can search through our selection below. You’ll also find aftermarket and OEM Belts and Hoses to meet your needs.
Essential 1946 Jeep Willys Belts and Hoses
Omix – Radiator Hose Clamp (Part No.17115.01)
from
$6.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Stainless Steel
- Sold Individually
- Limited 5 Year Warranty
Omix – Double Wire Clamp (Part No.17737.04)
from
$7.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Double Wire Design
- 2.5 in.
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Windshield Wiper Vacuum Tube (Part No.12025.33)
from
$51.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Metal
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25478)
from
$18.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25476)
from
$29.49
Product Features:
See More
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Premium Molded Coolant Hose (Part No.20993)
from
$49.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Crown Auto Jeep Replacmnt – Front Or Rear Brake Tee: (Mounts On Axle) (Part No.J0637432)
Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)
from
$79.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
Omix – Radiator Hose (Part No.17113.03)
from
$25.99
Are your radiator hoses soft or leaking? Engine heat and time will cause them to deteriorate. It’s always a good idea to replace both radiator hoses and the heater core hoses at the same time. Usually if one hose is bad, the others are close behind. Save
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Keeps Engine At Safe Temperature
- Easy Installation
- Limited 5 Year Warranty
Omix – Radiator Hose (Part No.17113.10)
from
$39.99
Are your radiator hoses soft or leaking? Engine heat and time will cause them to deteriorate. It’s always a good idea to replace both radiator hoses and the heater core hoses at the same time. Usually if one hose is bad, the others are close behind. Save
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Keeps Engine At Safe Temperature
- Easy Installation
- Limited 5 Year Warranty
Dayco – Flex Radiator Hoses; EPDM Rubber, 12.25 Inch Long, 1.5 Inch Inner Dia. (Part No.81141)
from
$16.79
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Omix – Fuel Line Set (Part No.17732.03)
from
$151.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- 5 Piece Kit
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Fuel Line Set (Part No.17732.06)
from
$53.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- 2 Piece Kit
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Fuel Hose; To Fuel Pump (Part No.17232.50)
from
$6.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Crimped At Both Ends
- 7 in. Long
- Limited 5 Year Warranty
Dayco – Double Cog V-Belt; 42.5 Inch Long, Exact Fit Premium Quality (Part No.22425)
from
$16.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.
Product Features:
See More
Product Features:
- Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Features specially treated cords for added strength, stability and reliability
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Omix – Fan Belt (Part No.17110.01)
from
$17.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Rubber
- Long Lasting
- Limited 5 Year Warranty
Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR22425)
from
$26.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
- High modulus, high strength tensile cord
- Oil and heat-resistant construction throughout
- Meets SAE J636b and SAE J637 specifications
- Meets RMA oil and heat resistant standards and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand joined V-belts
Gates – Automotive XL« High Capacity V-Belt (Part No.9480)
from
$31.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Omix – Heater Hose Fitting (Part No.17116.03)
from
$10.49
This heater hose fitting screws into the head or the water pump to allow a heater hose to attach to it. Fits 41-71 Willys 4 and 6 cylinder engines.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.50" Diameter (Part No.B70081)
from
$24.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Omix – Radiator Hose (Part No.17113.01)
from
$48.49
Are your radiator hoses soft or leaking? Engine heat and time will cause them to deteriorate. It’s always a good idea to replace both radiator hoses and the heater core hoses at the same time. Usually if one hose is bad, the others are close behind. Save
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Keeps Engine At Safe Temperature
- Easy Installation
- Limited 5 Year Warranty
Omix – Radiator Hose (Part No.17113.02)
from
$35.99
Are your radiator hoses soft or leaking? Engine heat and time will cause them to deteriorate. It’s always a good idea to replace both radiator hoses and the heater core hoses at the same time. Usually if one hose is bad, the others are close behind. Save
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Keeps Engine At Safe Temperature
- Easy Installation
- Limited 5 Year Warranty
Omix – Radiator Hose (Part No.17114.02)
from
$35.99
Are your radiator hoses soft or leaking? Engine heat and time will cause them to deteriorate. It’s always a good idea to replace both radiator hoses and the heater core hoses at the same time. Usually if one hose is bad, the others are close behind. Save
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Keeps Engine At Safe Temperature
- Easy Installation
- Limited 5 Year Warranty
Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25480)
from
$25.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Popular 1946 Jeep Willys Belts and Hoses Categories
1946 Jeep Willys Belts and Hoses
You count on your 1946 Jeep Willys to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 16 Belts and Hoses ranging in price from $4.99 to $79.99, you’re sure to find everything you need for your 1946 Jeep Willys.
Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 4 different brands like Dayco, Omix, and Imperial. 1946 Jeep Willys Belts and Hoses start as low as $4.99!
One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 45 extensive product reviews on 1946 Jeep Willys Belts and Hoses.
Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 1946 Jeep Willys below to get started!
Top-Rated Belts and Hoses Brands For Your 1946 Jeep Willys
Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1946 Jeep Willys running right for years to come. In our inventory you’ll find brands like Dayco, Omix, Imperial, and even more.
Popular Omix Belts and Hoses
You’ll find popular Omix brand products across Radiator Hoses and Hose Clamps. All are waiting to get your 1946 Jeep Willys back on the road. Some of the top-rated Omix products in these categories are:
Top-Rated Dayco Belts and Hoses
If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 1946 Jeep Willys, and some of our most reviewed Dayco parts include:
from
$24.99
(16)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.50" Diameter
Coolant Hoses
from
$16.79
(2)
Flex Radiator Hoses; EPDM Rubber, 12.25 Inch Long, 1.5 Inch Inner Dia.
Upper Radiator Hoses
FAQs for 1946 Jeep Willys Belts and Hoses
What are the most purchased Belts and Hoses for the 1946 Jeep Willys?
Out of 16 Belts and Hoses for the 1946 Jeep Willys, the most popular in our inventory are:
