1944 Chevrolet Truck Engine Parts
More 1944 Chevrolet Truck Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 1944 Chevrolet Truck, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 1944 Chevrolet Truck Engine Parts
Cloyes Performance – High Performance Timing Set (Part No.9-3146AZ)
from
$269.99
HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter “Z” Chain for Reduced Friction. “Z” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “Z” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.
Product Features:
See More
Product Features:
- The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
- Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
- Refer to our online catalog for detailed application-specific information
- Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
Felpro – Engine Valve Cover Gasket Set (Part No.VS 12869 T)
from
$46.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE — Features molded rubber over a rigid carrier which resists high heat
- SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Sealed Power – Engine Piston Ring Set (Part No.E-240X)
from
$63.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S288)
from
$17.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Felpro – Cylinder Head Gasket: Fiber-Faced Composite, Without Head Bolts (Part No.7619 B)
from
$28.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Validated for fit, form, and function
- Unsurpassed quality you can trust
Felpro – Engine Timing Cover Gasket Set (Part No.TCS 11557)
from
$22.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)
from
$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Felpro – Gasket Kit (Part No.260-1000AT)
from
$149.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Felpro – Cylinder Head Gasket Set (Part No.HS 7733 SH-2)
from
$35.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
- Application specific design to ensure a perfect fit and premium seal
- Premium quality parts you can trust
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Contains all the parts needed to complete the repair unless otherwise noted
Felpro – Engine Crankshaft Seal Kit (Part No.BS 11829-1)
from
$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Imperial – Engine Oil Cooler (Part No.241040)
from
$216.99
Product Features:
See More
- Imperial Swirl-Cool« engine oil cooler kit
- Size: 1-1/2″ x 6-1/2″ x 18″
- Heavy-duty applications
- All except Chevrolet V8 applications
- Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
- Heavy duty applications
- All except Chevrolet V8 applications
Imperial – Econo-Kool® Engine Oil Cooler (Part No.240459)
from
$141.99
Product Features:
See More
- Imperial Econo-Kool« engine oil cooler kit
- Size: 3/4″ x 7-1/2″ x 12-1/2″
- Light-duty applications
- All except Chevrolet V8 applications
- Size: 3/4 in. x 7-1/2 in. x 12-1/2 in.
- Light duty applications
- All except Chevrolet V8 applications
- Lightweight construction with high-efficiency turbulators
Felpro – Engine Push Rod Gasket Set (Part No.PS 5004 D)
from
$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – Engine Crankshaft Seal Kit (Part No.BS 40013)
from
$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – REAR MAIN BEARING SEAL SET (Part No.BS 40096)
from
$27.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Melling Select Performnce – High Performance High Volume Cast Iron Oil Pump (Part No.10552ST)
from
$255.99
Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. The Melling high performance cast iron oil pump series features a doweled housing and cover, extended drive and idler shaf
Product Features:
See More
Product Features:
- 10% Higher volume high performance upgrade over stock replacement
- CNC machined phosphate coated cast iron housing and cover
- Cover has extended idler shafts for additional support at high RPM’s
- Patented billet steel shark tooth helical gears
- Adjustable pressure relief valve
- Includes Chrome Moly Steel Intermediate Drive Shaft With Steel Guide
- Includes Lower Pressure Spring; Not Installed
- Includes Self Locking Mounting Bolts And Wrench
- Uses 3/4 inch diameter press-fit screen or bolt on screen
- Includes Oil Pump Screen Mounting Gasket
Melling Select Performnce – High Performance Cast Iron Standard Billet Gear Anti-Cavitation Racing Oil Pump (Part No.10990C)
from
$249.99
Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. The Melling high performance cast iron oil pump series features a doweled housing and cover, extended drive and idler shaf
Product Features:
See More
Product Features:
- 25% Higher volume anti-cavitation high performance upgrade of the M-99HVS
- CNC machined phosphate coated cast iron housing and cover
- Cover has extended idler shafts for additional support at high RPM’s
- Standard billet steel spur gears
- Manufactured with anti-cavitation grooves to prevent cavitation at low RPM’s
- Adjustable pressure relief valve
- Includes lower pressure spring; not installed
- Includes chrome moly steel intermediate drive shaft with steel guide
- Uses 3/4 inch diameter press-fit screen
- For racing applications only
- Warning: Using this pump will reduce oil pressure at idle
Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S262)
from
$18.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Cloyes Gear – Engine Timing Crankshaft Gear (Part No.2537)
from
$17.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain gears offer reliability and dependability for engine rebuilds and typical replacement jobs
- Helical tooth form for quiet operation and precision machined bore for true fit
- CAD designed and manufactured using premium materials to ensure optimal performance
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Felpro – Fuel Pump Bowl Gasket (Part No.5019)
from
$1.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Oil Pan Gasket Set: Cork-Rubber, 10 Piece Set (Part No.OS 5197 C-3)
from
$22.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Felpro – Oil Pan Gasket Set: Cork-Rubber, 4 Piece Set (Part No.OS 5041 C)
from
$18.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)
from
$2.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
MAHLE Original – Fuel Pump Gasket (Part No.D27094)
from
$1.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Felpro – Fuel Pump Mounting Gasket (Part No.5182)
from
$1.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Victor Reinz – Engine Timing Cover Seal (Part No.19-10358-01)
from
$29.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
National – Engine Harmonic Balancer Kit (Part No.5000)
from
$28.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Includes timing cover seal and harmonic balancer sleeve
- Solves the oil leaking around timing cover seal
- Made of stainless steel
- Takes up gaps caused by worn-out harmonic balancer shafts
National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)
from
$15.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Made of stainless steel
- Designed to prevent timing cover seal leaks
- Takes up gaps caused by worn-out harmonic balancer shafts
Popular 1944 Chevrolet Truck Engine Parts Categories
1944 Chevrolet Truck Engine Parts
You count on your 1944 Chevrolet Truck to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 25 Engine Parts ranging in price from $0.43 to $260.99, you’re sure to find everything you need for your 1944 Chevrolet Truck.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 8 different brands like National, Felpro, and Sealed Power. 1944 Chevrolet Truck Engine Parts start as low as $0.43!
One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 28 extensive product reviews on 1944 Chevrolet Truck Engine Parts. Some of the top-rated Engine Parts products we carry are Econo-Kool® Engine Oil Cooler with 4.7 stars and Ultra-Cool Engine Oil Cooler Kit with 5.0 stars.
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 1944 Chevrolet Truck below to get started!
Top-Rated Engine Parts Brands For Your 1944 Chevrolet Truck
Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1944 Chevrolet Truck running right for years to come. In our inventory you’ll find brands like National, Felpro, Sealed Power, and even more.
Popular Felpro Engine Parts
You’ll find popular Felpro brand products across Valve Cover and Cylinder Heads. All are waiting to get your 1944 Chevrolet Truck back on the road. Some of the top-rated Felpro products in these categories are:
from
$21.29
(1)
Cylinder Head Gasket: Fiber-Faced Composite, Without Head Bolts
Cylinder Head Gaskets
Top-Rated National Engine Parts
If National are what you’re looking for, our inventory holds plenty. We stock National brand Engine Parts for your 1944 Chevrolet Truck, and some of our most reviewed National parts include:
FAQs for 1944 Chevrolet Truck Engine Parts
What are the most purchased Engine Parts for the 1944 Chevrolet Truck?
Out of 25 Engine Parts for the 1944 Chevrolet Truck, the most popular in our inventory are:
What are the top-rated 1944 Chevrolet Truck Engine Parts?
Top-rated Engine Parts for your 1944 Chevrolet Truck based on customer reviews/ratings are:
from
$141.99
(3)
Econo-Kool® Engine Oil Cooler
“Good price perfect fit had all the parts I needed good quality”
from
$167.99
(1)
Ultra-Cool Engine Oil Cooler Kit
“Purchased for a 2005 Yukon XL Denali. Exceeded expectations for an aftermarket product”
