Unloaded Caliper w/Bracket -Domestic
Hover over the image to zoom in
Share this:

Wearever Unloaded Caliper w/Bracket -Domestic

Part No. 18-B4826 Warranty Details  
$59.99
Core Charge: $35.00
Quantity  Add to Cart

See if this part fits a specific vehicle.

Check Vehicle Fit

Wearever Remanufactured Friction Choice Brake Calipers are remanufactured to meet or exceed OEM performance. Each caliper includes all hardware needed for easy installation (mounting bolts not included). Wearever's caliper hardware allows for quick and easy installation because you no longer need to search for replacement components or reuse old hardware. Also, all rear parking brake hardware is installed and lubricated for your convenience, where applicable.
Back To Top
Brake Piston Count:2
Piston Material:Phenolic
Casting Material:Iron
Inlet Port Size:3/8 x 24
Bleeder Port Size:M10 x 1.0
Color/Finish:Gray
Package Contents:Caliper, Bracket, Hardware Kit
Installation Hardware Included:Yes
Pads Included:No
Mounting Bolts Included:No
Product Condition:Remanufactured
Piston Size (OD):1.868"
Brake Caliper Finish:Unfinished

REVIEW SNAPSHOT®

by PowerReviews
WeareverUnloaded Caliper w/Bracket -Domestic
 
4.2

(based on 18 reviews)

Ratings Distribution

  • 5 Stars

     

    (10)

  • 4 Stars

     

    (5)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (2)

88%

of respondents would recommend this to a friend.

Pros

  • Easy to install (10)
  • Decreased stopping distance (5)

Cons

No Cons

Best Uses

  • Everyday driving (11)
  • Replacement (7)
  • Restoration (3)
    • Reviewer Profile:
    • Casual driver (6), Mechanic (4), Auto enthusiast (3)

Most Liked Positive Review

 

Good quality and easy install.

Purchased a set of Wearever calipers to replace originals with 180,000 miles on them. The rust on the old brackets was making it impossible to install the new pads for a simple brake job....Read complete review

Purchased a set of Wearever calipers to replace originals with 180,000 miles on them. The rust on the old brackets was making it impossible to install the new pads for a simple brake job. New calipers work great with little fade under hard braking. Quality of seals and hardware seems pretty good. New pads installed in just a few minutes. Clips were included. install on the Jeep was also very fast. New copper washers were included for the brake line install as well. Bleeder valve was easy to open and took just a few minutes. Overall these calipers are very good. Time will tell how they hold up, but the first 200 miles have been great I would buy again

VS

Most Liked Negative Review

 

Be careful!

not sure where all the 5 start reviewers come from but i want to make all you buyers aware of this caliper. it does look new and it's of very good quality for a...Read complete review

not sure where all the 5 start reviewers come from but i want to make all you buyers aware of this caliper. it does look new and it's of very good quality for a rebuilt but the surface where the brake line meets the caliper with the banjo bolt that is supposed to be machined has been pained over and the surface is not perfectly smooth/flat. if you look at the back of the caliper (1st picture in the listing) it's the surface around the green plastic plug. what that does is create gaps and allows the brake fluid to escape (maybe a little, maybe a lot) - depends on how lucky/unlucky you are. and if you are not careful (like me) when torquing the banjo bolt, it's going to fail and that's not a part any Advance Auto Parts or Autozone anywhere carries. You either have to buy it online or try it at your dealers. So, do yourself a favor, either get a new caliper or even a used one online will work a lot better than this.

Reviewed by 18 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
5.0

I would buy it again.

By 

from undisclosed

See all my reviews

Verified Buyer

Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

It bolted wright up no problems so far.

 
1.0

these calipers only seem to be lasting 35 to 40 thousand mil

By 

from NEW YORK

Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

SECOND TIME REPLACEING, KILLED ROATERS AND PADS OF WHICH I HAD TO PAY TO REPLACE PLUS OWN LABOR.

  • Was this a gift?:
  • No
 
4.0

1 small hitch, but should be fine

By 

from undisclosed

Verified Buyer

Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

They game me some oem brand one and said it was the same thing just branded different. The oem brand one doesn't come with a new hose bolt like the one I bought for the other side. A little disappointed in that, but otherwise seems good.

 
4.0

Break caliper good quality with the bracket

By 

from Otisfield M.E

Verified Buyer

Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

Good caliper wish it had the bolts that hold it to the axle

  • Was this a gift?:
  • No
 
5.0

Great product

By 

from Allentown pa

Verified Buyer

Pros

    Cons

    • Easy to work with

    Best Uses

      Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

      Easy to install

       
      3.0

      Check the bleeder screws before installation

      By 

      from NC

      Verified Buyer

      Pros

      • Easy To Install

      Cons

      • Bleeder Screws

      Best Uses

        Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

        Be sure to check the bleeder screws before installing for 1) screw size, 2) quality and 3) ease of cracking as you may need to bleed the brakes after installation.

        I bought left and right calipers at the same time and unfortunately did not check the bleeder screws until after installation. The bleeder screw on the passenger side was 10 MM and the bleeder screw on the driver side was 7 mm. The 10 MM screw cracked easily, however, the driver-side screw was seized (!?) and my wrench just rounded the nut, so not a high quality screw. Took a pair of vice grips to crack the screw. Not enough clearance to put a bleeder hose on with vice grips. Now I've got to get a new bleeder screw, more brake fluid, and crawl back under the vehicle to replace the screw and re-bleed the brakes (since the driver's side front is the last in the bleeding order). Had I checked before installation, I could have perhaps cracked the screw while the caliper was off vehicle where I might have had better leverage, or better yet installed higher quality screws of the same size before installation. Obviously would have preferred high quality screws of the same size to be installed on the calipers in the first place.

        Fit was for 2001 Jeep Grand Cherokee Laredo 4L and was perfect. Also installed new Wearever Rotors and Ceramic Pads. No squeaks, normal heat.

         
        4.0

        Good quality and easy install.

        By 

        from PA

        About Me Auto Enthusiast

        See all my reviews

        Verified Buyer
        3 or more reviews submitted

        Pros

        • Decreased Stopping Distance
        • Easy To Install
        • Reduced Install Time

        Cons

          Best Uses

          • Everyday Driving
          • Replacement
          • Restoration

          Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

          Purchased a set of Wearever calipers to replace originals with 180,000 miles on them. The rust on the old brackets was making it impossible to install the new pads for a simple brake job. New calipers work great with little fade under hard braking. Quality of seals and hardware seems pretty good. New pads installed in just a few minutes. Clips were included. install on the Jeep was also very fast. New copper washers were included for the brake line install as well. Bleeder valve was easy to open and took just a few minutes. Overall these calipers are very good. Time will tell how they hold up, but the first 200 miles have been great I would buy again

          (2 of 2 customers found this review helpful)

           
          1.0

          Be careful!

          By 

          from Boston, MA

          Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

          not sure where all the 5 start reviewers come from but i want to make all you buyers aware of this caliper. it does look new and it's of very good quality for a rebuilt but the surface where the brake line meets the caliper with the banjo bolt that is supposed to be machined has been pained over and the surface is not perfectly smooth/flat. if you look at the back of the caliper (1st picture in the listing) it's the surface around the green plastic plug. what that does is create gaps and allows the brake fluid to escape (maybe a little, maybe a lot) - depends on how lucky/unlucky you are. and if you are not careful (like me) when torquing the banjo bolt, it's going to fail and that's not a part any Advance Auto Parts or Autozone anywhere carries. You either have to buy it online or try it at your dealers. So, do yourself a favor, either get a new caliper or even a used one online will work a lot better than this.

           
          5.0

          Thanks for the discount ,

          By 

          from Bluefield wv

          About Me Casual Driver

          Verified Buyer

          Pros

          • Easy To Install

          Cons

            Best Uses

            • Everyday Driving
            • Replacement

            Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

            Thanks for the help.

            (1 of 1 customers found this review helpful)

             
            4.0

            i would buy this product again

            By 

            from lisbon maine

            About Me Casual Driver

            Verified Buyer

            Pros

            • Easy To Install
            • Price

            Cons

              Best Uses

              • Everyday Driving
              • Performance Driving

              Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

              these calipers work great for the value I paid good performance and respond to the brake

              Displaying reviews 1-10

              Back to top

              Previous | Next »

              Do you have questions about this product?

               

              Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

              2 Questions | 2 Answers
              Displaying questions 1-2
              • Q:

                got the Fenco parts and calipers for changing them and no instructions at all. Is there a place to find out exactly how to re-install with new parts. Have an idea but want to make sure. Thanks.
                Asked on 3/14/2012 by Anonymous

                1 answer

                • CUSTOMER CARE

                  A:

                  For help with your project, I recommend purchasing a Haynes repair manual specifically for your vehicle. This should be able to assist you further into detail on how to repair or replace specific parts.

                  Answered on 3/15/2012 by Steve from AAP
              • Q:

                do these include new bolts to mount to the caliper bracket?
                Asked on 3/2/2011 by Anonymous

                1 answer

                • CUSTOMER CARE

                  A:

                  No, it does not include the new bolts. Stock ones can be reused with this new caliper bracket.

                  Answered on 3/3/2011 by Parts Guru Geo from AAP
              Displaying questions 1-2

              Do you have a question about this product? 

              Check out the specials in our monthly flyer.
               
               
              Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.