Unloaded Caliper w/Bracket -Domestic
Hover over the image to zoom in
Share this:

Wearever Unloaded Caliper w/Bracket -Domestic

Part No. 18-B4729 Warranty Details  
$63.99
Core Charge: $55.00
Quantity  Add to Cart

See if this part fits a specific vehicle.

Check Vehicle Fit

Wearever Remanufactured Friction Choice Brake Calipers are remanufactured to meet or exceed OEM performance. Each caliper includes all hardware needed for easy installation (mounting bolts not included). Wearever's caliper hardware allows for quick and easy installation because you no longer need to search for replacement components or reuse old hardware. Also, all rear parking brake hardware is installed and lubricated for your convenience, where applicable.
Back To Top
Bracket Included:Yes
Caliper Material:Cast Iron
Casting Material:Iron
Finish:Blasting + Anti-Rust
Hardware Included:Yes
Inlet Port Diameter:M10 x 1.5
Installation Hardware Included:Yes
Mounting Bolts Included:No
Mounting Hardware Included:No
O.E.M. Replacement:Yes
Package Contents:Caliper, Bracket, Hardware Kit
Pads Included:No
Performance Rated:No
Piston Material:Phenolic
Piston Quantity:2

REVIEW SNAPSHOT®

by PowerReviews
WeareverUnloaded Caliper w/Bracket -Domestic
 
4.5

(based on 53 reviews)

Ratings Distribution

  • 5 Stars

     

    (39)

  • 4 Stars

     

    (7)

  • 3 Stars

     

    (2)

  • 2 Stars

     

    (2)

  • 1 Stars

     

    (3)

88%

of respondents would recommend this to a friend.

Pros

  • Easy to install (25)
  • Decreased stopping distance (8)
  • No fade (5)

Cons

No Cons

Best Uses

  • Everyday driving (19)
  • Replacement (17)
    • Reviewer Profile:
    • Mechanic (14), Truck enthusiast (11), Auto enthusiast (10), Casual driver (10)
    • Was this a gift?:
    • No (3)

Most Liked Positive Review

 

Easy with air impact tool

For my 2004 Chevrolet Silverado 2500 HD Ext. Cab V-8, 6.0 Liter 4 X 4. I foound it easy to buy new pads to make it fully load. Used an air impact...Read complete review

For my 2004 Chevrolet Silverado 2500 HD Ext. Cab V-8, 6.0 Liter 4 X 4. I foound it easy to buy new pads to make it fully load. Used an air impact tool to remove caliper off Mounting Bracket to add the brake pads. Hard part was to remove the old one off truck. I rounded off Mounting Bracket I had to get Caliper Mounting Bracket Bolts from a hardware store. Due to Brake Caliper with Mounting Bracket did not come with new Caliper Mounting Bracket Bolts. That was an extra cost of 10 dollars and 60 cents each total of 21 dollars and 20 cents.

VS

Most Liked Negative Review

 

Poor quality control

Couldn't get bracket bolts loose for pad replacement. Store rep also tried without any luck. Slid bracket off of pins and you could see that they were never removed, just shot blasted and...Read complete review

Couldn't get bracket bolts loose for pad replacement. Store rep also tried without any luck. Slid bracket off of pins and you could see that they were never removed, just shot blasted and coated while still on caliper. Caliper didn't even slide well on them. Advance ordered replacement. Also instructions stated to torque fasteners to factory specifications. Inlet hose bolt provided stretched and nearly broke well before reaching torque setting. Replaced with Dorman bolts without any issues.

Reviewed by 53 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
5.0

works great!

By 

from undisclosed

Verified Buyer

Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

works great!

 
5.0

Hopefully I won't need them for a long time

By 

from undisclosed

Verified Buyer

Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

Works like they should

 
5.0

Good

By 

from undisclosed

Verified Buyer

Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

None

 
5.0

good fit for 02 duramax

By 

from undisclosed

Verified Buyer

Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

good fit and good price

 
5.0

Nice

By 

from undisclosed

Verified Buyer

Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

Good quality rebuild with all the needed slide pins and hardware.

 
5.0

I would buy again

By 

from undisclosed

Verified Buyer

Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

Works Great

 
5.0

I will use them again

By 

from undisclosed

Verified Buyer

Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

good fit

 
5.0

The guys at Advance Auto are great to deal with.

By 

from undisclosed

Verified Buyer

Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

I ordered a brake caliper online from another company and when I installed it I couldn't get the banjo bolt to seal. I ran to Advance Auto and they had one in stock. Installed it and it works great.

 
5.0

Good Replacement

By 

from undisclosed

Verified Buyer

Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

Perfect fit.

(0 of 1 customers found this review helpful)

 
5.0

Excellent

By 

from undisclosed

Verified Buyer

Comments about Wearever Unloaded Caliper w/Bracket -Domestic:

J

Displaying reviews 1-10

Back to top

Previous | Next »

Do you have questions about this product?

 

Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

8 Questions | 10 Answers
Displaying questions 1-8
  • Q:

    I have an 04 sierra and an 05 silverado both are 5.3 4x4 trucks. How do they take the same caliper but different rotors 04 11.99 inches and 05 is 12.99 inches.
    Asked on 6/17/2016 by Ken from Ohio

    1 answer

    • CUSTOMER CARE

      A:

      Hi Ken, happy to help! You may use different diameter rotors with the same caliper and pads. The slightly larger diameter means more force is available to stop the vehicle. Keeping the same caliper and same pads, but installing a larger diameter rotor, you would get greater stopping power.

      Answered on 6/23/2016 by John the Car-Doc from AAP
  • Q:

    how does this caliper work when 04 chevys have 11.99 inch rotors and the 05 have 12.99?
    Asked on 6/16/2016 by Ken from ohio

    1 answer

    • CUSTOMER CARE

      A:

      Hi Ken! To check the exact fit application for the part number 18-B4729, please provide us with the year, make, model and engine size of your vehicle.

      Answered on 6/16/2016 by Steve from AAP
  • Q:

    Does this come with break pad retaining clips?
    Does it come with banjo bolts?
    Asked on 7/22/2015 by Josh from Charlestown, NH

    1 answer

    • CUSTOMER CARE

      A:

      Hi Josh! The Valiper - Part No. 18-B4729 does not come with the brake pads, but it includes all installation hardware necessary for the job.

      Answered on 7/22/2015 by Solomon
  • Q:

    My truck is a 2006 Chevy Z71 4WD 4D w/ 5.3 Vin is 2GCEK13Z86131109. No option for Z71 in drop-down. I entered Z as engine code. Says this is compatible. Is that true?
    Asked on 11/19/2014 by Jeff

    2 answers

  • Q:

    WHEN YOU BUY THE BRAKE CALIPERS IS THE PRICE GIVEN FOR BOTH SIDES OR JUST ONE SIDE?
    Asked on 4/3/2014 by T Z from RURALVALLEY,PA.

    1 answer

    • CUSTOMER CARE

      A:

      Hi T Z! I see that this Brake Caliper with Mounting Bracket is sold individually.

      Answered on 4/5/2014 by Vincent from AAP
  • Q:

    does this caliper work on 4wd models
    Asked on 11/11/2013 by dsf from traverse city mi

    1 answer

    • CUSTOMER CARE

      A:

      Hi DSF, this caliper would fit various makes and models. To check the exact fit application, please provide us the year, make, model and engine size of your vehicle.

      Answered on 11/12/2013 by Steve from AAP
  • Q:

    Isn't the SLC632 the front left caliper?
    Asked on 12/2/2011 by Buck from Brick, NJ

    1 answer

    • CUSTOMER CARE

      A:

      No, this Fenco Brake Caliper (Part No. SLC632) works for Front left or right in some vehicles and also for Rear left or right in some vehicles. If you could please include the year make and model of the vehicle and we would be better able to assist you.

      Answered on 12/2/2011 by Dennis from AAP
  • Q:

    Is front right the passenger side of the vehicle?
    Asked on 6/21/2011 by Barry from Centreville, VA

    2 answers

    • CUSTOMER CARE

      A:

      Yes, Right side is the passenger side.

      Answered on 6/22/2011 by DIY Daniel from AAP
    • A:

      no, you want to use slc633 for the front passenger side

      Answered on 10/8/2011 by MarkG from Holland, IA
Displaying questions 1-8

Do you have a question about this product? 

Check out the specials in our monthly flyer.
 
 
Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.