Braid Flex 2" ID x 10"
Hover over the image to zoom in
Share this:

Nickson Braid Flex 2" ID x 10"

Part No. 520010 Warranty Details  
$31.99
Quantity  Add to Cart

Fit of this part varies by vehicle & equipment specs Type of Fit

Braided Stainless Reinforcement:Yes
Exhaust Clamps Included:No
Finish:Stainless Steel
Inlet Attachment Type:Weld or Clamp
Material:Stainless Steel
Outlet Attachment Type:Weld or Clamp
Overall Length:14 in
Weldable Metals:Yes

REVIEW SNAPSHOT®

by PowerReviews
NicksonBraid Flex 2" ID x 10"
 
4.8

(based on 5 reviews)

Ratings Distribution

  • 5 Stars

     

    (4)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Reviewed by 5 customers

Displaying reviews 1-5

Back to top

(0 of 1 customers found this review helpful)

 
5.0

works for me

By 

from east orange, nj

Verified Buyer

Comments about Nickson Braid Flex 2" ID x 10":

smooth installation

  • Was this a gift?:
  • No

(0 of 1 customers found this review helpful)

 
5.0

Worth every penny

By 

from Pennsyltucky

Verified Buyer

Comments about Nickson Braid Flex 2" ID x 10":

Fit nicely

  • Was this a gift?:
  • No

(0 of 1 customers found this review helpful)

 
5.0

good flex pipe replacement

By 

from new kensington, pa

See all my reviews

Verified Buyer
3 or more reviews submitted

Comments about Nickson Braid Flex 2" ID x 10":

Good replacement piece

(10 of 17 customers found this review helpful)

 
5.0

better than replacing exhaust system

By 

from western PA

About Me Casual Driver, Shadetree mechanic

See all my reviews

Verified Buyer
Helpful Reviewer

Pros

  • Affordable
  • Well-made

Cons

  • Deceiving Dimensiona

Best Uses

  • Repair

Comments about Nickson Braid Flex 2" ID x 10":

I installed this myself to replace a rusted flex connector. It is a very nice product. However, the pipe is actually about 16" long, which worked in my favor - although the description says it is only 10". I welded this to my original exhaust.

Using this part saved me hundreds of dollars over replacing part or all of my exhaust pipe.

(11 of 17 customers found this review helpful)

 
4.0

Troubled exhaust

By 

from Long Island, NY

About Me Auto Enthusiast

Verified Buyer
Helpful Reviewer

Pros

  • Good quality

Cons

  • None

Best Uses

  • Replacement

Comments about Nickson Braid Flex 2" ID x 10":

My flex pipe rotted out. I cut the damaged pipe out and slid this right over the solid pipe on both ends. A few small welds and it's as good as new. Overall length is 14 inches, flex portion is 10 inches.

Displaying reviews 1-5

Back to top

Do you have questions about this product?

 

Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

20 Questions | 22 Answers
Displaying questions 1-10Previous | Next »
  • Q:

    Will This A 2005 Honda Accord V4 Sedan ?
    Asked on 4/18/2017 by Danny from Hazleton PA

    3 answers

    • A:

      There are three sizes of the 2" ID pipes sold in stores that i saw. This is
      a universal piece so if your car has a 2" OD pipe and 10 inches of room
      than it will fit just fine. Just remember to either weld or use jb weld and
      u-clamps.

      Answered on 4/19/2017 by skipmate from undisclosed
    • A:

      As long as the pipe diameter is the same it should. This flex pipe is
      universal. There is no flange. So it will need welded or clamped into place
      on the exhaust.

      Answered on 4/19/2017 by trmoss0421 from undisclosed
    • CUSTOMER CARE

      A:

      Glad to assist, Danny! This Nickson Braid Flex 2" ID x 10" (Part No. 520010) is universal and should work as far as dimensions go. You would have to match one by size to what is on the vehicle that can be fabricated into its place. This flex pipe measures 2 inches inner diameter and 10 inches length.

      Answered on 4/19/2017 by Steve from AAP
  • Q:

    Hey there...will the part fit on a 2007 chevy impala 3.9 or is there any universal one that can fit my car?.....
    Asked on 3/26/2017 by Johnny from Fort worth Texas

    1 answer

    • CUSTOMER CARE

      A:

      Glad to assist, Johnny! This Nickson Braid Flex - Part No. 520010 is universal and should work as far as dimensions go. You would have to match one by size to what is on the vehicle that can be fabricated into its place. This flex pipe measures 2"-inch inner diameter and 10"-inch length. The exact fit flex pipe for your 2007 Chevrolet Impala 3.9L is unavailable online. However, I'd recommend checking with your local store for availability.

      Answered on 3/29/2017 by Solomon from AAP
  • Q:

    will this fit on a 05 Nissan sentra base model with the 1.8 engine I know I will have to cut the old flex pipe out and either weld or clamp a new one in its place just not sure on which diameter I need
    Asked on 12/10/2016 by Rob

    1 answer

    • CUSTOMER CARE

      A:

      Yes, Rob, this Nickson Braid Flex 2" ID x 10" (Part No. 520010) should fit your 2005 Nissan Sentra as your stock muffler requires 2 inch pipes. However, when it comes to repair and maintenance it is always recommended referring the vehicle owner's manual for the exact specifications to get better and safer results.

      Answered on 12/15/2016 by Steve from AAP
  • Q:

    Will this fit my 2002 infiniti g20
    Asked on 11/20/2016 by Clay

    1 answer

    • CUSTOMER CARE

      A:

      Hi Clay, glad to help you! This Nickson Braid Flex (Part No. 520010) is universal and should work as far as dimensions go. This Braid Flex measures 2"-inch inner diameter and 10"-inch length.

      Answered on 11/22/2016 by Solomon from AAP
  • Q:

    Will this work for my 2004 saturn ion
    Asked on 11/14/2016 by Alexis from New castle de

    1 answer

    • CUSTOMER CARE

      A:

      I'm glad to assist, Alexis! This Nickson Braid Flex - Part No. 520010 is universal and is not application specific. You would have to match one by size to what is on the vehicle that can be fabricated into its place.

      Answered on 11/15/2016 by Solomon from AAP
  • Q:

    need to replace this braided flex pipe on my 1998 toyota camery 3.0 v6 will this part fit.
    Asked on 11/21/2015 by mark from mount airy md.

    1 answer

  • Q:

    Will this work on my 2001 SAAB 9-5 SE with 3.0L V-6 ? If no, is the 2 1/4 " the correct part ?? Thanks, George
    Asked on 4/25/2015 by George from Conway, NH

    1 answer

    • CUSTOMER CARE

      A:

      Hi George, I'm glad to assist you! This Nickson Braid Flex - Part No. 520010 is universal and does not have any applications associated with it. You will need to see what size you have and match it accordingly to what we offer.

      Answered on 4/25/2015 by Solomon
  • Q:

    Would this part work on a 2003 Saturn Vue V6 3.0L All-wheel drive automatic transmission?
    Asked on 3/22/2015 by anonymous from Western PA

    1 answer

    • CUSTOMER CARE

      A:

      Hi Anonymous, this part is universal and not an exact fit for your 2003 Saturn Vue 3.0L. The exact braid flex tube for your vehicle is currently unavailable online.

      Answered on 3/22/2015 by Steve from AAP
  • Q:

    I see 2 different answers from Vincent AAP. First answer says I.D is 2". 4 questions later he says O.D. 2". I need to know which it is.
    Asked on 6/17/2014 by Gary from Milwaukee WI.

    1 answer

    • CUSTOMER CARE

      A:

      Hi Gary, glad to assist you! This part has 2 inches inlet diameter. The braided section of this part is 10 inches and the overall length is 14 inches.

      Answered on 6/18/2014 by Steve from AAP
  • Q:

    Will this fit my 2008 Saturn Astra XR? Thanks
    Asked on 1/27/2014 by Clayton from Satellite Beach, FL

    1 answer

    • CUSTOMER CARE

      A:

      Hi Clayton, good question! This flex pipe is universal and not a direct fit for your 2002 Honda Civic DX. Some slight modifications like weld-on or clamp-on may be required.

      Answered on 1/28/2014 by Vincent from AAP
Displaying questions 1-10Previous | Next »

Do you have a question about this product? 

Check out the specials in our monthly flyer.
 
 
Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.