Valve Cover Grommet Kit
Hover over the image to zoom in
Share this:

Mr. Gasket Valve Cover Grommet Kit

Part No. 6376 Warranty Details  
$5.39
Quantity  Add to Cart

Fit of this part varies by vehicle & equipment specs Type of Fit

One valve cover grommet, one PCV grommet. Molded from neoprene to ensure positive oil seal. Fits most stamped and die cast covers.

Product Features:
  • Made from neoprene rubber for ultimate sealing
  • Kit include 1 valve cover and 1 pvc grommets
Back To Top
Material:Rubber
Type:Grommets

REVIEW SNAPSHOT®

by PowerReviews
Mr. GasketValve Cover Grommet Kit
 
1.9

(based on 8 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (6)

50%

of respondents would recommend this to a friend.

Reviewed by 8 customers

Displaying reviews 1-8

Back to top

(8 of 17 customers found this review helpful)

 
5.0

Fit my GM 250ci, 4.1L Straight Six Great

By 

from Mid Ga

About Me Mechanic

See all my reviews

Ask me a question

3 or more reviews submitted

Pros

  • Durable
  • Improves Down Force
  • Lightweight

Cons

  • Difficult To Install

Best Uses

  • Replacement
  • Restoration

Comments about Mr. Gasket Valve Cover Grommet Kit:

These fit the stock valve cover of a 1984 Chev C10 great!
They did take quite a bit of manipulation to install but once they are properly in they provide a great seal. The ones I removed were also very tough to remove and seemed to be of the same design. Maybe the other bad reviewers just did not try hard enough?
I am a full time Technician and they took some manipulation to get in but I was happy with the end result!

(5 of 11 customers found this review helpful)

 
4.0

Perfect fit

By 

from NC

About Me Auto Enthusiast

See all my reviews

Verified Buyer
3 or more reviews submitted

Pros

  • Easy To Install

Cons

  • No cons

Best Uses

  • Replacement

Comments about Mr. Gasket Valve Cover Grommet Kit:

Good rubber

 
1.0

I will not buy this part again.

By 

from undisclosed

Verified Buyer

Comments about Mr. Gasket Valve Cover Grommet Kit:

You would think with 150+million small and big block chevys that are still out there ,Advance auto parts could come up with a better fitting product than a universal fit that I have no idea what it fits and Mr.Gasket doesn't either.I had to give it 1 star becuuse I wasn't able to give it less.

 
1.0

Doesn't fit.

By 

from undisclosed

Verified Buyer

Comments about Mr. Gasket Valve Cover Grommet Kit:

This came up as a fit for the PCV valve but it was not the right part.

(7 of 12 customers found this review helpful)

 
1.0

Wrong part

By 

from North Spring, WV

Verified Buyer
Helpful Reviewer

Comments about Mr. Gasket Valve Cover Grommet Kit:

This was the 3rd time trying to get the correct product. This was the 2nd time a representative tried to order what was needed and it was wrong. I usually have good service with my local store.

(18 of 34 customers found this review helpful)

 
1.0

To Big

By 

from Muncie, IN

About Me Casual Driver

See all my reviews

Verified Buyer
3 or more reviews submitted

Pros

    Cons

    • Difficult To Install

    Best Uses

      Comments about Mr. Gasket Valve Cover Grommet Kit:

      Could not use it. It was the wrong size for the valve cover.

      (63 of 116 customers found this review helpful)

       
      1.0

      Doesnt fit

      By 

      from new york

      See all my reviews

      Verified Buyer
      Helpful Reviewer

      Comments about Mr. Gasket Valve Cover Grommet Kit:

      Comes up with this part when searching for a cadillac. But this part is incorrect and does not fit.

      • Car & Truck:
      • Mechanic

      (69 of 125 customers found this review helpful)

       
      1.0

      Did not fit my 95 4.6l

      By 

      from Wichita KS

      Pros

        Cons

        • Did not fit

        Best Uses

          Comments about Mr. Gasket Valve Cover Grommet Kit:

          Did not fit my 95 4.6L ford mercury

          Displaying reviews 1-8

          Back to top

          Do you have questions about this product?

           

          Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

          13 Questions | 13 Answers
          Displaying questions 1-10Previous | Next »
          • Q:

            Will this fit a 2005 infiniti g35 sedan 3.5
            Asked on 2/7/2017 by Jay

            1 answer

            • CUSTOMER CARE

              A:

              Hi Jay, I'm glad to assist you! This Mr. Gasket Valve Cover Grommets (Part No. 6376) is universal and is not application specific. You would have to match one by size to what is on the vehicle that can be fabricated into its place. The breather grommet has 1 inch inside diameter and 1.22 inches outside diameter. The PCV grommet has 0.75 inch inside diameter and 1.22 inches outside diameter. The breather grommet must have the bottom cut out to function.

              Answered on 2/7/2017 by Solomon from AAP
          • Q:

            will this fit a 2004 infiniti q45?
            Asked on 1/29/2016 by juan from orlando, fl

            1 answer

            • CUSTOMER CARE

              A:

              I'm glad to assist you, Juan! This Mr. Gasket Valve Cover Grommets (Part No. 6376) is universal and not application specific. You would have to match one by size to what is on the vehicle that can be fabricated into its place. The exact valve cover grommet for your vehicle is currently unavailable online.

              Answered on 1/31/2016 by Steve from AAP
          • Q:

            will this fit a 2002 Nissan Maxima 3.5L?
            Asked on 6/30/2015 by Jimmy from North Augusta SC

            1 answer

            • CUSTOMER CARE

              A:

              I'm glad to assist you, Jimmy! This Mr. Gasket Valve Cover Grommets - Part No. 6376 is universal and is not application specific. You would have to match one by size to what is on the vehicle that can be fabricated into its place. The breather grommet has 1 inch inside diameter and 1.22 inches outside diameter. The PCV grommet has 0.75 inch inside diameter and 1.22 inches outside diameter. The breather grommet must have the bottom cut out to function.

              Answered on 6/30/2015 by Solomon
          • Q:

            Will this part fit a 2009 Nissan Cube?
            Asked on 2/24/2015 by Nicolas from United States

            1 answer

            • CUSTOMER CARE

              A:

              Hi Nicolas, I'm glad to assist you! This is universal and is not application specific. You would have to match one by size to what is on the vehicle that can be fabricated into its place. The inside diameter of the breather grommet is 1 inch and PCV is 0.75 inch. The outside diameter of both grommets is 1.22 inches.

              Answered on 2/24/2015 by Solomon
          • Q:

            will this fit my 2004 Nissan Altima 2.5
            Asked on 7/2/2014 by Bob Ann from Clarksdale, MS

            1 answer

            • CUSTOMER CARE

              A:

              Hi Bob, glad to help you! This part is not an exact fit for your 2004 Nissan Altima 2.5L. The exact valve cover grommet for your vehicle is currently unavailable online.

              Answered on 7/3/2014 by Steve from AAP
          • Q:

            what is the inside and outside(valve cover) diameter of this part
            Asked on 10/23/2013 by KJ from tulsa

            1 answer

            • CUSTOMER CARE

              A:

              Hi KJ, the dimensions for the Mr. Gasket Valve Cover Grommets (Part No. 6376) are 1.22 inches in outside diameter, and 1 inch/.75 inch inside diameter.

              Answered on 10/23/2013 by Steve from AAP
          • Q:

            will this work on a 2000 F150 4.2
            Asked on 4/11/2012 by Anonymous

            1 answer

            • CUSTOMER CARE

              A:

              This part Mr. Gasket Grommet Set for Breather and PCV Valve, Part No. 6376 manufactured by Mr. Gasket is universal and not a direct fit for your vehicle 2000 F150 4.2 . This is a one size fits most, slight modification may be required.

              Answered on 4/12/2012 by Aaron from AAP
          • Q:

            Will this fit a 1994 Jeep Cherokee 4.0 H.O.
            Asked on 7/2/2011 by 123 Chubbs from Richfield PA

            1 answer

            • CUSTOMER CARE

              A:

              This part is universal and not a direct fit for your vehicle. This is a one size fits most.

              Answered on 7/4/2011 by Steve from AAP
          • Q:

            Does this fit the valve cover for a 2000 Saab 9-5 with the 2.3L?
            Asked on 6/27/2011 by Anonymous

            1 answer

            • CUSTOMER CARE

              A:

              This part is universal and not a direct fit for your vehicle. This is a one size fits most.

              Answered on 6/28/2011 by DIY Daniel from AAP
          • Q:

            do they fit a 1996 chevy c1500 4.3 vortec plastic valve cover
            Asked on 2/20/2011 by Anonymous

            1 answer

            • CUSTOMER CARE

              A:

              This part is universal and not a direct fit for your vehicle. This is a one size fits most.

              Answered on 2/22/2011 by Parts Guru Geo from AAP
          Displaying questions 1-10Previous | Next »

          Do you have a question about this product? 

          Check out the specials in our monthly flyer.
           
           
          Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.