Wheel Bearing Hub Assembly
Hover over the image to zoom in
Wheel Bearing Hub Assembly Wheel Bearing Hub Assembly
Share this:

Driveworks Wheel Bearing Hub Assembly

Part No. NT513200 Warranty Details  
$117.99
Quantity  Add to Cart

See if this part fits a specific vehicle.

Check Vehicle Fit

Driveworks Hub & Bearing assemblies are designed to meet or exceed original equipment (OE) standards in form, fit and function. These wheel bearing hub assemblies are designed to support the vehicle's rolling weight and provides a smooth and quite rotation of the wheel. Easy installation and quiet performance are just a few of the benefits you will find with the installation of Driveworks Hub & Bearing assemblies. The Hub & Bearings come complete with new wheel studs, hub and bearings. The assembly also includes new ABS Wheel Sensors where applicable.

Product Features:
  • 1 year replacement warranty if defective
  • Easy installation and quiet performance
  • Complete with new wheel studs, hub and bearing
  • Includes new ABS Wheel Sensors where applicable
Back To Top
Material:65Mn Steel
Sealed:Yes

REVIEW SNAPSHOT®

by PowerReviews
DriveworksWheel Bearing Hub Assembly
 
4.4

(based on 7 reviews)

Ratings Distribution

  • 5 Stars

     

    (5)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (0)

83%

of respondents would recommend this to a friend.

Pros

  • Durable (3)
  • Easy to use (3)

Cons

No Cons

Best Uses

  • Trucks (4)
    • Was this a gift?:
    • No (5)

Reviewed by 7 customers

Displaying reviews 1-7

Back to top

 
5.0

WheelHub

By 

from undisclosed

Verified Buyer

Comments about Driveworks Wheel Bearing Hub Assembly:

Wheel bearing hub. Haven't had a chance to put I yet. Should be fine. I've done a few for another truck

 
5.0

I would buy this product again in fact i did

By 

from Whiteville nc

See all my reviews

Verified Buyer
3 or more reviews submitted

Pros

    Cons

      Best Uses

      • Perfect match for my blazer

      Comments about Driveworks Wheel Bearing Hub Assembly:

      Love the simplicity. Of the installation

      • Was this a gift?:
      • No
       
      5.0

      Easy to install. I would buy this product again.

      By 

      from Warner Robins ga

      About Me Casual Driver

      Verified Buyer

      Pros

      • Durable
      • Easy To Use

      Cons

        Best Uses

        • Trucks

        Comments about Driveworks Wheel Bearing Hub Assembly:

        Customer service was great. Very knowledgeable and customer oriented. Will definitely shop there again.

        • Was this a gift?:
        • No

        (3 of 5 customers found this review helpful)

         
        5.0

        Perfect!

        By 

        from MACON GA

        About Me Casual Driver

        Verified Buyer
        Helpful Reviewer

        Pros

        • Durable
        • Easy To Use
        • High-Performance
        • Lightweight
        • Versatile

        Cons

          Best Uses

          • Trucks

          Comments about Driveworks Wheel Bearing Hub Assembly:

          Exactly what I needed!

          • Was this a gift?:
          • No

          (4 of 6 customers found this review helpful)

           
          5.0

          Great parts

          By 

          from Beaumont tx.

          About Me Auto Enthusiast, Mechanic, Truck Enthusiast

          Verified Buyer
          Helpful Reviewer

          Pros

          • Durable

          Cons

            Best Uses

            • Trucks

            Comments about Driveworks Wheel Bearing Hub Assembly:

            Great part

            • Was this a gift?:
            • Yes

            (5 of 7 customers found this review helpful)

             
            4.0

            Cheap but is it durable

            By 

            from Alabama

            See all my reviews

            3 or more reviews submitted

            Pros

              Cons

                Best Uses

                • Large Cars
                • Small Cars
                • Trucks

                Comments about Driveworks Wheel Bearing Hub Assembly:

                I bought the higher priced one last time and it lasted maybe 5 years so I decided to try the cheaper one this time. Installation is a breeze and should take less than two hours. Remove the tire/wheel, remove the brake caliper (two 18mm bolts), remove caliper mounting bracket(two 18mm bolts),disconnect the antilock brake sensor wire (the connector is on top of the swing-arm behind the rubber flap) and remove hub assembly (three 18mm bolts). Remember to lubricate the caliper slide bolts before installation.

                • Was this a gift?:
                • No
                 
                2.0

                Bought back in April 2015.

                By 

                from Old Town, FL

                About Me Auto Enthusiast, Truck Enthusiast

                Pros

                • Easy To Use
                • It Fit My 2000 Blazer

                Cons

                • Only Lasted 7 Months

                Best Uses

                  Comments about Driveworks Wheel Bearing Hub Assembly:

                  This was a perfect fit for my 2000 Blazer. The only issue is it only lasted 7 months then the bearing went bad. Went to store to get replacement for the bad one. When I got to store nothing but headaches.

                  • Was this a gift?:
                  • No

                  Displaying reviews 1-7

                  Back to top

                  Do you have questions about this product?

                   

                  Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

                  3 Questions | 3 Answers
                  Displaying questions 1-3
                  • Q:

                    Why do we need to replace the hub instead of just the bearings.
                    Asked on 3/30/2015 by david from evans ga

                    1 answer

                    • CUSTOMER CARE

                      A:

                      Good question, David! You don't need to replace the hub. You need to remove the hub from the suspension and have the bearing pressed out and replace it. The hub is then inserted into the new bearing.

                      Answered on 3/30/2015 by Solomon
                  • Q:

                    Is part easy to do your self
                    Asked on 3/15/2011 by speedo from Elkhart,In

                    1 answer

                    • CUSTOMER CARE

                      A:

                      Well this all depends on the skill level of whoever is removing or replacing the part. Some may have a harder time than others who have experience. I would recommend purchasing a Haynes repair manual specifically for your vehicle. This should be able to assist you further into detail on how to repair or replace specific parts.

                      Answered on 3/16/2011 by Parts Guru Geo from AAP
                  • Q:

                    what causes plug to go bad
                    Asked on 5/7/2010 by Anonymous

                    1 answer

                    • CUSTOMER CARE

                      A:

                      Are you talking about the electrical plug.

                      Answered on 8/17/2010 by Anonymous
                  Displaying questions 1-3

                  Do you have a question about this product? 

                  Check out the specials in our monthly flyer.
                   
                   
                  Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.