Hub Bearing Assembly
Hover over the image to zoom in
Hub Bearing Assembly
Share this:

Driveworks Hub Bearing Assembly

Part No. NT513214 Warranty Details  
$127.99
Quantity  Add to Cart

See if this part fits a specific vehicle.

Check Vehicle Fit

Driveworks hub Bearing assembly is designed to meet or exceed original equipment (OE) standards in form, fit and function. Hub bearing assembly is designed to support the vehicle's weight and reduce resistance so that your wheels maintain contact with the road under any condition. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of Driveworks hub bearing assembly. The hub bearing come complete with wheel studs, hub and bearings. Also, includes ABS Wheel Sensors where applicable.

Product Features:
  • Constructed from high-quality materials for extended durability
  • Integral raceway provides proper clearance between the ball and bearing riding surfaces
  • Ensures proper ABS function and quiet operation
  • Precision-matched components deliver smooth and quiet operation
  • Manufactured to strict engineering quality standards
  • Improved connection and conductivity of the ABS signal due to high strength polymer and copper wiring
Back To Top
Material:65Mn Steel
Sealed:Yes

REVIEW SNAPSHOT®

by PowerReviews
DriveworksHub and Bearing Assembly
 
3.2

(based on 23 reviews)

Ratings Distribution

  • 5 Stars

     

    (5)

  • 4 Stars

     

    (9)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (7)

58%

of respondents would recommend this to a friend.

Pros

  • Easy to use (6)

Cons

No Cons

Best Uses

  • Small cars (5)
    • Reviewer Profile:
    • Casual driver (5), Mechanic (3)
    • Was this a gift?:
    • No (14)

Most Liked Positive Review

 

I'd buy this product again.

This ended up being the wrong part for my 2005 Chevrolet Malibu 2.2L. While my car does have anti-lock brakes, the sensor isn't in the bearing.

This ended up being the wrong part for my 2005 Chevrolet Malibu 2.2L. While my car does have anti-lock brakes, the sensor isn't in the bearing.

VS

Most Liked Negative Review

 

Bearing Lasted only 2500 miles???

This bearing in my 2008 Malibu lasted 2500 miles, replaced half shaft after wheel noise started again thinking that too was an issue. WRONG - Went back and picked up another new one and...Read complete review

This bearing in my 2008 Malibu lasted 2500 miles, replaced half shaft after wheel noise started again thinking that too was an issue. WRONG - Went back and picked up another new one and the problem was fixed. Hopefully I wont have to replace this one too??

Reviewed by 23 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
5.0

Always go to advance auto

By 

from undisclosed

Verified Buyer

Comments about Driveworks Hub and Bearing Assembly:

No problem. Perfect fit.

 
5.0

Perfect fit

By 

from Indiana

Verified Buyer

Comments about Driveworks Hub and Bearing Assembly:

Direct replacement , appears to be good quality.

  • Was this a gift?:
  • No
 
5.0

Good for the money

By 

from Va

Verified Buyer

Comments about Driveworks Hub and Bearing Assembly:

Perfect fit came with abs sensor

  • Was this a gift?:
  • No
 
5.0

Hub assembly perfect fit

By 

from Atlanta, GA

Verified Buyer

Comments about Driveworks Hub and Bearing Assembly:

Easy to install and priced just right.

 
5.0

Excellent product

By 

from Syracuse, ny

About Me Casual Driver

See all my reviews

Ask me a question

Verified Buyer
3 or more reviews submitted

Pros

  • Durable
  • Easy To Use

Cons

    Best Uses

    • Small Cars

    Comments about Driveworks Hub and Bearing Assembly:

    Good price exact fit

    • Was this a gift?:
    • No
     
    4.0

    ?

    By 

    from undisclosed

    Verified Buyer

    Comments about Driveworks Hub and Bearing Assembly:

    I purchased the mid grade wheel bearing in the hopes that it will last longer than the previous two purchased for my other vehicle

     
    4.0

    Good price

    By 

    from undisclosed

    Verified Buyer

    Comments about Driveworks Hub and Bearing Assembly:

    None

     
    4.0

    Second one was a charm

    By 

    from Appleton, WI

    See all my reviews

    Verified Buyer

    Comments about Driveworks Hub and Bearing Assembly:

    After the first hub having a bad sensor the second worked perfectly!

    • Was this a gift?:
    • No
     
    4.0

    Just like original, no issues, would buy again.

    By 

    from PA

    Verified Buyer

    Comments about Driveworks Hub and Bearing Assembly:

    Seems well made, be sure to torque axel nut to manufacture specs.

    (4 of 6 customers found this review helpful)

     
    4.0

    It works, FOLLOW INSTRUCTIONS

    By 

    from Boca Raton FL

    About Me Mechanic

    Pros

    • Oe Fit

    Cons

    • Chinese

    Best Uses

    • OE replacement

    Comments about Driveworks Hub and Bearing Assembly:

    I normally don't write reviews, was only on here checking the price to try and save my customer a couple of bucks. To those that have these fail prematurely. TORQUE THE NUT. Even the Moog and National, Raybesto's brand hub and bearings are chinese. The only one that aren't are the SKF. the OEM Delco is made in India.

    OE Torque spec is 159ft/lb on a G6/malibu/aura. INstalling these with a airgun or overtightening will ensure a quick demise.

    • Was this a gift?:
    • No

    Displaying reviews 1-10

    Back to top

    Previous | Next »

    Do you have questions about this product?

     

    Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

    5 Questions | 5 Answers
    Displaying questions 1-5
    • Q:

      is there a right or left side when ordering these front hubs
      Asked on 11/12/2011 by Anonymous

      1 answer

      • CUSTOMER CARE

        A:

        They should work for either side.

        Answered on 11/13/2011 by Dennis from AAP
    • Q:

      How do I know if I need 4 wheel ABS or 4-Wheel ABS; FRONT; Driven Hub w/ Integral ABS on my 2006 Ponitac G6 GTP?
      I tried 2 each 4 wheel ABS but keep getting ABS light on and traction control.
      Asked on 10/5/2011 by Dave from Millbury, Ma

      1 answer

      • CUSTOMER CARE

        A:

        I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.

        Answered on 10/10/2011 by DIY Daniel from AAP
    • Q:

      is this a rear hub with abs
      Asked on 8/16/2011 by Anonymous

      1 answer

      • CUSTOMER CARE

        A:

        No, this is a front hub assembly.

        Answered on 8/16/2011 by Vincent from AAP
    • Q:

      Will this fit my 2004 chev Malbu Maxx right front side?
      Asked on 11/18/2010 by marty from VA beach Va.

      1 answer

      • CUSTOMER CARE

        A:

        This should work for either side.

        Answered on 11/18/2010 by Mike the Auto Parts Master from AAP
    • Q:

      ix this the wheel bearing i need to take the old off lube up the wheel and it is ready to be put on
      Asked on 10/28/2009 by dee

      1 answer

      • CUSTOMER CARE

        A:

        I recommend visiting your local Advance Auto Parts store and picking up a Haynes repair manual for your vehicle. This manual will give you step by step instructions on how to take off and replace the front wheel bearing along with what tools you will need to do the job.

        Answered on 10/29/2009 by Mike from Advance Auto Parts
    Displaying questions 1-5

    Do you have a question about this product? 

    Check out the specials in our monthly flyer.
     
     
    Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.