Exhaust Manifold Kit
Hover over the image to zoom in
Exhaust Manifold Kit Exhaust Manifold Kit
Share this:

Dorman - OE Solutions Exhaust Manifold Kit

Part No. 674-196 Warranty Details  
$178.99
Quantity  Add to Cart

See if this part fits a specific vehicle.

Check Vehicle Fit

More like a complete kit than a single part, many of our Exhaust Manifolds include gaskets and hardware for a complete installation. This part is a direct replacement.

Product Features:
  • Heat-shield may be included for protection of engine components where applicable
  • Cast iron or stainless tubular construction protects against warping or cracking
  • Leak-resistant for long-lasting performance
  • A rigorous quality inspection has been undertaken to ensure product standards
Back To Top
Color:Stainless Steel
Compatibility:Left
Grade:Standard Replacement
Hardware Included:Yes
Inlet Port Shape:Square
Material:Stainless Steel
Mounting Hole Quantity:8
Gasket Or Seal Included:Yes

REVIEW SNAPSHOT®

by PowerReviews
Dorman - OE SolutionsExhaust Manifold Kit
 
4.4

(based on 18 reviews)

Ratings Distribution

  • 5 Stars

     

    (11)

  • 4 Stars

     

    (5)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

100%

of respondents would recommend this to a friend.

Pros

  • Easy to install (5)
  • Great sound (4)

Cons

No Cons

Best Uses

  • Replacement (10)
  • Everyday driving (8)
  • Performance driving (3)
  • Restoration (3)
    • Reviewer Profile:
    • Casual driver (6), Auto enthusiast (3), Mechanic (3)

Most Liked Positive Review

 

looks robust

This manifold fit perfectly seemed to increase power over cracked old one.I noticed it was stronger looking than the stock one.I replaced the whole exhaust system on my 97 grand cherokee.It was a big job...Read complete review

This manifold fit perfectly seemed to increase power over cracked old one.I noticed it was stronger looking than the stock one.I replaced the whole exhaust system on my 97 grand cherokee.It was a big job ;but easier than i thought it would be.

VS

Most Liked Negative Review

 

I definitely would not by this exhaust manifold again.

The quality control on the exhaust manifold I purchased was non-existent. The manifold (few inches above the collector) touched the engine block where the oil pan flange meets and I had to take...Read complete review

The quality control on the exhaust manifold I purchased was non-existent. The manifold (few inches above the collector) touched the engine block where the oil pan flange meets and I had to take a power ram to move it. You're not going to move it with a pry bar and I was only able to get it to move about an 1/8" with the ram. This was by no means the cheapest exhaust manifold for sale and I thought I was buying a quality unit.

Reviewed by 18 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
1.0

I definitely would not by this exhaust manifold again.

By 

from undisclosed

See all my reviews

Verified Buyer
Helpful Reviewer

Comments about Dorman - OE Solutions Exhaust Manifold Kit:

The quality control on the exhaust manifold I purchased was non-existent. The manifold (few inches above the collector) touched the engine block where the oil pan flange meets and I had to take a power ram to move it. You're not going to move it with a pry bar and I was only able to get it to move about an 1/8" with the ram. This was by no means the cheapest exhaust manifold for sale and I thought I was buying a quality unit.

 
4.0

Good

By 

from undisclosed

Verified Buyer

Comments about Dorman - OE Solutions Exhaust Manifold Kit:

Fits nice

 
5.0

I would buy another one.

By 

from undisclosed

Verified Buyer

Comments about Dorman - OE Solutions Exhaust Manifold Kit:

Fit good. Sounds good.

 
3.0

Good part, damaged gasket

By 

from undisclosed

Verified Buyer

Comments about Dorman - OE Solutions Exhaust Manifold Kit:

The manifold itself was great, however the gasket was damaged and could not be used. They need to use more care during packaging.

 
5.0

awesome

By 

from kodak

Verified Buyer

Comments about Dorman - OE Solutions Exhaust Manifold Kit:

awesome

 
4.0

Exhaust work's good!!!

By 

from West Berlin NJ

Verified Buyer

Pros

  • Great price and will fit

Cons

  • on
  • The flange donut seal was to small had to use the old one over.

Best Uses

    Comments about Dorman - OE Solutions Exhaust Manifold Kit:

    We used the exhaust to replace the cracked one that was on our Jeep.

     
    5.0

    Direct fit, no problems.

    By 

    from NY

    About Me Auto Enthusiast

    Verified Buyer

    Pros

    • Easy To Install

    Cons

      Best Uses

      • Replacement

      Comments about Dorman - OE Solutions Exhaust Manifold Kit:

      A word of caution! The bolts from the manifold to the 1st exhaust pipe were rusted and need to be cut off I used an Dremel with a one inch cut off blade note it is close to the transmission oil cooling lines, protect the lines with a piece of wood and seeing that u are working close use goggles n a face shield otherwise it was a direct fit

       
      5.0

      Need a manifold?

      By 

      from Lost Creek, WV

      About Me Auto Enthusiast

      See all my reviews

      Verified Buyer
      3 or more reviews submitted

      Pros

      • Flex Joints
      • Great Price
      • Stainless Steel

      Cons

      • Difficult To Install

      Best Uses

      • Everyday Driving
      • Replacement

      Comments about Dorman - OE Solutions Exhaust Manifold Kit:

      My manifold was cracked in two places, this was the cheapest one I could get fast, in stock ready to rock. The flex joints should make it last longer than stock. How hard can it be? I'll install it myself and save money, right? Well it was a little bit bigger job than I thought. One day and an evening later and it was running quieter than I had ever heard it. That long?! Well I had never done any thing that extensive on a car before, I am mechanically inclined but not a mechanic. I looked up a walk through of the process complete with pictures and started dousing all the bolts with PB Blaster (great stuff). Got everything off and cleaned all surfaces thoroughly (carb cleaner works great) then decided I shouldn't reuse the old bolts. Back to Advance! (Save yourself the trip and get new hardware with your manifold). Now put everything back exactly where it came from. I had to let mine sit overnight before it would run.

       
      5.0

      Fit perfectly

      By 

      from Macon Ga.

      About Me Mechanic

      See all my reviews

      Ask me a question

      3 or more reviews submitted

      Pros

      • Well made

      Cons

        Best Uses

        • Replacement

        Comments about Dorman - OE Solutions Exhaust Manifold Kit:

        "1999 Wrangler 4.0" Exhaust manifold used to replace a stock manifold that was cracked 3/4 of the way around. Fit was great, and it included both gaskets plus the flange bolts. Local Advance had it in stock and on the shelf too.

        (5 of 8 customers found this review helpful)

         
        5.0

        Very good replacement.

        By 

        from West by God Virginia

        About Me 4x4 Is A Must

        Verified Buyer
        Helpful Reviewer

        Pros

        • Great Sound
        • Works Well

        Cons

        • Fit Issue Exchanged

        Best Uses

        • A Little Better Than Oem
        • Everyday Driving
        • Performance Driving

        Comments about Dorman - OE Solutions Exhaust Manifold Kit:

        This product is great but you must make sure that it is flat where the two sides meet up in the middle. if there is a step up from one side to the other it will not fit properly. Before you have your mechanic tear down your Jeep or you do it to yourself take a straight edge and make sure it is flat. I had to exchange mine but after that it was great. Flex design will eliminate factory flaw of header/ exhaust manifold cracking.

        Displaying reviews 1-10

        Back to top

        Previous | Next »

        Do you have questions about this product?

         

        Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

        8 Questions | 10 Answers
        Displaying questions 1-8
        • Q:

          WHAT IS THE WARRANTY ON THIS PART
          Asked on 12/5/2015 by steve from saint peters mo

          1 answer

          • CUSTOMER CARE

            A:

            Hi Steve, I'm glad to assist you. This Dorman - OE Solutions Exhaust Manifold Kit (Part No. 674-196) comes with limited lifetime warranty. In order to know more about our warranty policy, please click the below link:
            http://shop.advanceautoparts.com/o/warranties

            Answered on 12/6/2015 by Solomon from AAP
        • Q:

          what size are the included fasteners for the exhaust flange?
          Asked on 8/17/2015 by freebird01 from fort wayne, IN

          1 answer

          • CUSTOMER CARE

            A:

            Hi Freebird! The size of the exhaust flange fastener included in this Dorman - OE Solutions Exhaust Manifold Kit (Part No. 674-196) is 3/8-16x1-3/4 and it is a grade 5 Zinc/Clear plated USS cap screw.

            Answered on 8/18/2015 by Steve from AAP
        • Q:

          Is this manifold California legal? Does it have ca CARB EO #?
          Asked on 11/24/2014 by Patron St. of Smog Techs from South San Francisco

          1 answer

          • CUSTOMER CARE

            A:

            Hi Patron, glad to assist you! This carburetor does not matter works for both and does not need a Carb number.

            Answered on 11/25/2014 by Solomon
        • Q:

          I hope its stronger than the factory EM?
          Asked on 3/3/2013 by Tron from Warren, Oh

          2 answers

          • CUSTOMER CARE

            A:

            Yes, the cast iron or stainless tubular construction of this Dorman - OE Solutions Exhaust Manifold Kit - part# 674-196 protects against warping and/or cracking. A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

            Answered on 3/3/2013 by Vincent from AAP
          • CUSTOMER CARE

            A:

            For further assistance regarding Dorman - OE Solutions Exhaust Manifold Kit, Part No. 674-196, please provide the year, make, model and engine size of your vehicle. This information would help us to assist you in a better way.
            For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

            Answered on 3/3/2013 by Aaron from AAP
        • Q:

          why do you offer this exhaust manifold with a 1 year warranty when Auto Zone and Oreilly Auto Parts both have a Limited Lifetime Warranty for the same exact part..
          Asked on 9/1/2011 by brian from Sand Springs

          1 answer

          • CUSTOMER CARE

            A:

            We do offer the same Limited Lifetime Warranty on this product.

            Answered on 9/1/2011 by DIY Daniel from AAP
        • Q:

          When installing this product will it easily bolt together where the old conection was? Or could there be problems with this product lining up with with the lower end exhaust pipe?
          Asked on 7/24/2010 by TNT from Columbia MD

          2 answers

          • CUSTOMER CARE

            A:

            Yes it should bolt up easily just like the OEM one.

            Answered on 7/28/2010 by Kevin from AAP
          • A:

            this part will bolt directly up and will mount directly back to downpipe without a issue

            Answered on 7/29/2010 by jeepster from gastonia, nc
        • Q:

          is this ex manifold stainless steel?
          Asked on 5/31/2010 by chris from lake city,fl.

          1 answer

          • CUSTOMER CARE

            A:

            It is steel.

            Answered on 6/1/2010 by Kevin from AAP
        • Q:

          WHAT VEHICLES CAN THIS PART WORK ON?VIC SAN ANTONIO,TX
          Asked on 3/25/2010 by VIC from SAN ANTONIO,TX

          1 answer

          • CUSTOMER CARE

            A:

            Jeep- Cherokee, Comanche, Grand Cherokee, Wrangler, 4.0L.

            Answered on 3/25/2010 by kevin from AAP
        Displaying questions 1-8

        Do you have a question about this product? 

        Check out the specials in our monthly flyer.
         
         
        Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.