What is a Core Charge ?
A "Core Charge" is similar to the deposit you might pay for a can or bottle of soda. In many states, to promote recycling, you are charged a deposit when you purchase a can of soda and you receive your deposit back when you return the empty can. Many automotive parts have a Core Charge, or Core Price, that works the same way as a soda can deposit.
Here's how the Core Charge works :
- The part you are purchasing contains a component that is recyclable
- The Core Charge deposit is charged at the time of purchase
- When the recyclable component from your old part is returned to us, the charge is refunded to you
To receive your Core Charge refund, you can do either of the following :
- Bring the part to any Advance Auto Parts store along with your receipt or packing slip
- Mail the part back to Advance Auto Parts following the directions including on your packing slip
Core Charges are often mandated by state legislature, and, as such, the actual core charge and taxes on the charge may vary depending on the state in which you buy your part. The Advance Auto Parts core charge presented to you online today with your item is representative of the most common core charge. If you have any questions, please call 1-877-ADVANCE (238-2623) or visit any Advance Auto Parts store.
Warranties
All products sold on AdvanceAutoParts.com are covered by warranty. Terms and length vary by product. Check individual product pages for the warranty length applicable to each product. Please see below for the full text of our warranty policies.
General Warranty Policy
Advance Auto Parts Limited Warranty - applies to all products not covered by one of the below warranties.
Warranties For Specific Products
Product Warranty Questions
Please contact Customer Care for any warranty questions.
Engine and Transmission Warranty Claims
If you are experiencing problems with an engine or transmission you purchased from Advance Auto Parts, please call (888) 286-6772, Monday through Friday, 8:00am - 5:30pm Eastern Time. For all other products, please contact Customer Care.
Filters and Manufacturer's Warranties
Consumer purchasers of automotive filters are sometimes told by an automobile dealer-s service writer or mechanic that a brand of replacement filter cannot be used in the consumer-s vehicle during the warranty period. The claim is made that use of the brand will "void the warranty," with the statement or implication that only the original equipment brand of filters may be used. This, of course, tends to cast doubt on the quality of the replacement filter.
That claim is simply not true. If the consumer asks for the statement in writing, he will not receive it. Nevertheless, the consumer may feel uneasy about using replacement filters that are not original equipment. With the large number of do-it-yourselfers who prefer to install their own filters, this misleading claim should be corrected.
Under the Magnuson - Moss Warranty Act, 15U.S.C. SS 2301-2312 (1982) and general principles of the Federal Trade Commission Act, a manufacturer may not require the use of any brand of filter (or any other article) unless the manufacturer provides the item free of charge under the terms of the warranty.
So, if the consumer is told that only the original equipment filter will not void the warranty, he should request that the OE filter be supplied free of charge. If he is charged for the filter, the manufacturer will be violating the Magnuson - Moss Warranty Act and other applicable law.
By providing this information to consumers, the Filter Manufacturers Council can help to combat the erroneous claim that a brand of replacement filter other than the original equipment will "void the warranty."
It should be noted that the Magnuson - Moss Warranty Act is a federal law that applies to consumer products. The Federal Trade Commission has authority to enforce the Magnuson - Moss Warranty Act, including obtaining injunctions and orders containing affirmative relief. In addition, a consumer can bring suit under the Magnuson - Moss Warranty Act.
Curt Front Mount Hitch




-
Product Details
Part No.31053
Warranty Details (1 YR REPLACEMENT IF DEFECTIVE)
CURT front mount trailer hitches allow you to use the front end of your vehicle for various towing applications. They can be used for mounting a winch, a snow plow, a number of hitch-mounted accessories and can even be used for some towing applications. When space is limited, a front hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front hitch receiver, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front mount hitch are the CURT step pad, license plate holder, spare tire mount and skid shield. A front mount hitch bolts onto the underside of the vehicle frame just like a rear mount hitch; only, it is placed in the front of the vehicle, providing a useful receiver tube to accept a 2" x 2" shank. They are commonly used on trucks, vans and SUVs. This CURT front mount trailer hitch features a gross trailer weight capacity of 5,000 lbs. and a tongue weight capacity of 500 lbs. It is designed to be a custom-fit trailer hitch for certain years of the Ford E-Series E-150, E-250 or E-350 (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with all necessary hardware for a complete installation. At CURT, we do not see our front receiver hitches as a backburner item to our rear mount hitches. We back them up with a one-year finish warranty and limited lifetime warranty to give you peace of mind on and off the road.
Product Features:- Made with a vehicle-specific design for a custom fit
- Provides a convenient mount for hitch accessories
- Ideal for attaching a snow plow, cargo carrier or other front hitch mount
- Allows for easy maneuvering of a trailer into a tight spot
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
- Protected by a durable black powder coat finish
- Co-cured in a rust-resistant liquid Bonderite coating
- Strengthened with a forged, welded, seamless collar
- Equipped with an open-back receiver for easy cleaning
-
Fitment Details
-
Read ReviewQ & AAsk a question, get answers from real customers and in-house experts.orDisclaimer: We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.
-
Product Details
Part No.31053
Warranty Details (1 YR REPLACEMENT IF DEFECTIVE)
CURT front mount trailer hitches allow you to use the front end of your vehicle for various towing applications. They can be used for mounting a winch, a snow plow, a number of hitch-mounted accessories and can even be used for some towing applications. When space is limited, a front hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front hitch receiver, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front mount hitch are the CURT step pad, license plate holder, spare tire mount and skid shield. A front mount hitch bolts onto the underside of the vehicle frame just like a rear mount hitch; only, it is placed in the front of the vehicle, providing a useful receiver tube to accept a 2" x 2" shank. They are commonly used on trucks, vans and SUVs. This CURT front mount trailer hitch features a gross trailer weight capacity of 5,000 lbs. and a tongue weight capacity of 500 lbs. It is designed to be a custom-fit trailer hitch for certain years of the Ford E-Series E-150, E-250 or E-350 (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with all necessary hardware for a complete installation. At CURT, we do not see our front receiver hitches as a backburner item to our rear mount hitches. We back them up with a one-year finish warranty and limited lifetime warranty to give you peace of mind on and off the road.
Product Features:- Made with a vehicle-specific design for a custom fit
- Provides a convenient mount for hitch accessories
- Ideal for attaching a snow plow, cargo carrier or other front hitch mount
- Allows for easy maneuvering of a trailer into a tight spot
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
- Protected by a durable black powder coat finish
- Co-cured in a rust-resistant liquid Bonderite coating
- Strengthened with a forged, welded, seamless collar
- Equipped with an open-back receiver for easy cleaning
-
Fitment Details
-
-
Customer Review
-
-
Customer Questions & AnswersAsk a question, get answers from real customers and in-house experts.or
-
Disclaimer: We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.