What is a Core Charge ?
A "Core Charge" is similar to the deposit you might pay for a can or bottle of soda. In many states, to promote recycling, you are charged a deposit when you purchase a can of soda and you receive your deposit back when you return the empty can. Many automotive parts have a Core Charge, or Core Price, that works the same way as a soda can deposit.
Here's how the Core Charge works :
- The part you are purchasing contains a component that is recyclable
- The Core Charge deposit is charged at the time of purchase
- When the recyclable component from your old part is returned to us, the charge is refunded to you
To receive your Core Charge refund, you can do either of the following :
- Bring the part to any Advance Auto Parts store along with your receipt or packing slip
- Mail the part back to Advance Auto Parts following the directions including on your packing slip
Core Charges are often mandated by state legislature, and, as such, the actual core charge and taxes on the charge may vary depending on the state in which you buy your part. The Advance Auto Parts core charge presented to you online today with your item is representative of the most common core charge. If you have any questions, please call 1-877-ADVANCE (238-2623) or visit any Advance Auto Parts store.
Warranties
All products sold on AdvanceAutoParts.com are covered by warranty. Terms and length vary by product. Check individual product pages for the warranty length applicable to each product. Please see below for the full text of our warranty policies.
General Warranty Policy
Advance Auto Parts Limited Warranty - applies to all products not covered by one of the below warranties.
Warranties For Specific Products
Product Warranty Questions
Please contact Customer Care for any warranty questions.
Engine and Transmission Warranty Claims
If you are experiencing problems with an engine or transmission you purchased from Advance Auto Parts, please call (888) 286-6772, Monday through Friday, 8:00am - 5:30pm Eastern Time. For all other products, please contact Customer Care.
Filters and Manufacturer's Warranties
Consumer purchasers of automotive filters are sometimes told by an automobile dealer-s service writer or mechanic that a brand of replacement filter cannot be used in the consumer-s vehicle during the warranty period. The claim is made that use of the brand will "void the warranty," with the statement or implication that only the original equipment brand of filters may be used. This, of course, tends to cast doubt on the quality of the replacement filter.
That claim is simply not true. If the consumer asks for the statement in writing, he will not receive it. Nevertheless, the consumer may feel uneasy about using replacement filters that are not original equipment. With the large number of do-it-yourselfers who prefer to install their own filters, this misleading claim should be corrected.
Under the Magnuson - Moss Warranty Act, 15U.S.C. SS 2301-2312 (1982) and general principles of the Federal Trade Commission Act, a manufacturer may not require the use of any brand of filter (or any other article) unless the manufacturer provides the item free of charge under the terms of the warranty.
So, if the consumer is told that only the original equipment filter will not void the warranty, he should request that the OE filter be supplied free of charge. If he is charged for the filter, the manufacturer will be violating the Magnuson - Moss Warranty Act and other applicable law.
By providing this information to consumers, the Filter Manufacturers Council can help to combat the erroneous claim that a brand of replacement filter other than the original equipment will "void the warranty."
It should be noted that the Magnuson - Moss Warranty Act is a federal law that applies to consumer products. The Federal Trade Commission has authority to enforce the Magnuson - Moss Warranty Act, including obtaining injunctions and orders containing affirmative relief. In addition, a consumer can bring suit under the Magnuson - Moss Warranty Act.
Curt Class 1 Trailer Hitch with Ball Mount




-
Product Details
Part No.111322
Warranty Details (1 YR REPLACEMENT IF DEFECTIVE)
CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Chrysler PT Cruiser (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary installation hardware. This class 1 hitch kit also comes with a Euro Mount ball mount, with a 2" diameter ball, to be a complete towing package. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty.
Product Features:- Made with a vehicle-specific design for a custom fit
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
- Protected by a durable high-gloss black powder coat finish
- Co-cured in a rust-resistant liquid Bonderite coating
- Strengthened with a forged, welded, seamless collar
- Equipped with an open-back receiver for easy cleaning
- Euro Mount installs with no tools or torque specifications required
- Chrome-plated trailer ball fits 2" couplers
- Permanently attached trailer ball cannot be loosened or stolen
-
Fitment Details
-
Read ReviewQ & AAsk a question, get answers from real customers and in-house experts.orDisclaimer: We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.
-
Product Details
Part No.111322
Warranty Details (1 YR REPLACEMENT IF DEFECTIVE)
CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch with ball mount has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc.). Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch and ball mount combination is designed to be a custom-fit trailer hitch for certain years of the Chrysler PT Cruiser (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with a hitch pin and clip and all necessary installation hardware. This class 1 hitch kit also comes with a Euro Mount ball mount, with a 2" diameter ball, to be a complete towing package. Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty.
Product Features:- Made with a vehicle-specific design for a custom fit
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
- Protected by a durable high-gloss black powder coat finish
- Co-cured in a rust-resistant liquid Bonderite coating
- Strengthened with a forged, welded, seamless collar
- Equipped with an open-back receiver for easy cleaning
- Euro Mount installs with no tools or torque specifications required
- Chrome-plated trailer ball fits 2" couplers
- Permanently attached trailer ball cannot be loosened or stolen
-
Fitment Details
-
-
Customer Review
-
-
Customer Questions & AnswersAsk a question, get answers from real customers and in-house experts.or
-
Disclaimer: We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.