Exhaust Gas Recirculation Valve
Hover over the image to zoom in
Exhaust Gas Recirculation Valve Exhaust Gas Recirculation Valve
Share this:

BWD Exhaust Gas Recirculation Valve

Part No. EGR101D Warranty Details  
$56.49
Quantity  Add to Cart

See if this part fits a specific vehicle.

Check Vehicle Fit

BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today's ever-changing marketplace.

Product Features:
  • Stainless steel valve components ensure durability
  • Polyester-reinforced silicone diaphragm resists thermal aging in temperatures up to 200°C
  • Includes reinforced gasket to ensure complete replacement
  • Direct-fit replacement for ease of installation
Back To Top
Hose Connector Quantity:1
Valve Type:GM Valve

REVIEW SNAPSHOT®

by PowerReviews
BWDExhaust Gas Recirculation Valve
 
4.3

(based on 14 reviews)

Ratings Distribution

  • 5 Stars

     

    (7)

  • 4 Stars

     

    (4)

  • 3 Stars

     

    (3)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

  • Easy to use (7)

Cons

No Cons

Best Uses

  • Trucks (6)
    • Reviewer Profile:
    • Truck enthusiast (5), Mechanic (3)
    • Was this a gift?:
    • No (11)

Most Liked Positive Review

 

Easy installation and tested perfectly

Bolt access was difficult and slow-going due to tight location and you should remove the vacuum lines & electrical cables near it to help with access, but if you take your time, it's...Read complete review

Bolt access was difficult and slow-going due to tight location and you should remove the vacuum lines & electrical cables near it to help with access, but if you take your time, it's very easy. Also, my port was FILTHY, so it is wise to clean it to prevent your new valve from getting fouled right away. I tested the MAP sensor after installation and all tested perfectly. The truck "settled" down nicely after new EGR valve installed and all the backfiring stopped after a 5 minute test ride.

VS

Most Liked Negative Review

 

simple fix to a larger problem

I was having some problems with my vehicle the engine was loaping i replaced the e.g.r valve the problem was solved I found a few vacuum leaks in the process

I was having some problems with my vehicle the engine was loaping i replaced the e.g.r valve the problem was solved I found a few vacuum leaks in the process

Reviewed by 14 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
5.0

I would buy this product again.

By 

from undisclosed

See all my reviews

Verified Buyer
3 or more reviews submitted

Comments about BWD Exhaust Gas Recirculation Valve:

Quality product, good price.

 
5.0

Quality Part

By 

from undisclosed

See all my reviews

Verified Buyer
3 or more reviews submitted

Comments about BWD Exhaust Gas Recirculation Valve:

Worked as expected

(1 of 2 customers found this review helpful)

 
5.0

very good product. works well

By 

from skowhegan, Maine

About Me Mechanic

See all my reviews

Ask me a question

Verified Buyer

Pros

  • Durable
  • Easy To Use

Cons

    Best Uses

      Comments about BWD Exhaust Gas Recirculation Valve:

      perfect replacement part. Fixed emission issue.

      • Was this a gift?:
      • No

      (0 of 3 customers found this review helpful)

       
      5.0

      EGR Valve

      By 

      from Monson, MA

      About Me Truck Enthusiast

      See all my reviews

      Ask me a question

      Verified Buyer
      3 or more reviews submitted

      Pros

      • Easy To Use

      Cons

        Best Uses

        • Trucks

        Comments about BWD Exhaust Gas Recirculation Valve:

        This product was extremely easy to install, worked perfectly for the specific functions it was designed for.

        • Was this a gift?:
        • No

        (5 of 8 customers found this review helpful)

         
        5.0

        It worked.

        By 

        from Florence, SC

        About Me Truck Enthusiast

        See all my reviews

        Verified Buyer
        3 or more reviews submitted

        Comments about BWD Exhaust Gas Recirculation Valve:

        Helped eliminate the black smoke billowing out the back.

        • Was this a gift?:
        • No

        (5 of 10 customers found this review helpful)

         
        5.0

        ome compadable,great product

        By 

        from crawfordville,florida

        About Me Mechanic

        Verified Buyer
        Helpful Reviewer

        Pros

        • Easy To Use
        • High-Performance

        Cons

          Best Uses

          • Trucks

          Comments about BWD Exhaust Gas Recirculation Valve:

          this egr valve looked just as quality made as original manufactures one,and worked great!!!

          (4 of 8 customers found this review helpful)

           
          5.0

          perfect fit & easy to install.

          By 

          from Atlanta, Ga

          About Me Mechanic

          Verified Buyer
          Helpful Reviewer

          Pros

          • Easy To Use

          Cons

            Best Uses

            • Trucks

            Comments about BWD Exhaust Gas Recirculation Valve:

            Easy to install.

            • Was this a gift?:
            • No

            (0 of 1 customers found this review helpful)

             
            4.0

            Product performed as expected

            By 

            from Cedar Falls, IA

            About Me Truck Enthusiast

            See all my reviews

            Verified Buyer

            Pros

            • Easy To Use

            Cons

              Best Uses

              • Trucks

              Comments about BWD Exhaust Gas Recirculation Valve:

              I purchased and installed this EGR valve for maintenance purposes, and as far as I can tell, it's performing as it is supposed to.

              • Was this a gift?:
              • No
               
              4.0

              perfect fit

              By 

              from West Columbia, SC

              About Me Auto Enthusiast, Casual Driver

              Verified Buyer

              Pros

              • Durable
              • Easy to install

              Cons

                Best Uses

                • Large Cars
                • Small Cars
                • Trucks

                Comments about BWD Exhaust Gas Recirculation Valve:

                I installed the EGR Valve on my 94 Chevy and the service engine light no longer comes on. Install only took about 5 minutes. That engine light has been coming on for years.

                • Was this a gift?:
                • No

                (4 of 7 customers found this review helpful)

                 
                4.0

                Easy installation and tested perfectly

                By 

                from Long Neck, Delaware

                About Me Truck Enthusiast

                Verified Buyer
                Helpful Reviewer

                Pros

                • Easy To Use
                • Tested To Specs

                Cons

                  Best Uses

                    Comments about BWD Exhaust Gas Recirculation Valve:

                    Bolt access was difficult and slow-going due to tight location and you should remove the vacuum lines & electrical cables near it to help with access, but if you take your time, it's very easy. Also, my port was FILTHY, so it is wise to clean it to prevent your new valve from getting fouled right away. I tested the MAP sensor after installation and all tested perfectly. The truck "settled" down nicely after new EGR valve installed and all the backfiring stopped after a 5 minute test ride.

                    • Was this a gift?:
                    • No

                    Displaying reviews 1-10

                    Back to top

                    Previous | Next »

                    Do you have questions about this product?

                     

                    Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

                    15 Questions | 16 Answers
                    Displaying questions 1-10Previous | Next »
                    • Q:

                      1990 chevey k5 blazer 5.7 gas why wound i havt to turn winshield wipers on lowe to make the cruise control ingage and when i crank up blazer it dont want to idle and then i use the gas peddle to keep it running for 10 to 15 second s and it sounds like its trying to flood but clears up and runs good but sfter i drive it 5 to 10 minutes and put in park its idled up and when i use the linkage on throttle bodie to rev it up to see if it was stuck it got stuck 3/4 or 4000 rpm and i had to cut off and crunk it up and idle was aroun 1000 rpm i felt a snap in that can lookin thing that has a linkage going into it from the throttle linkage fromm throttl bodie, these are the codes advance gave me , code 32, code 02 and engine light is on premanant but came and go up to a month age, thanks jeff
                      Asked on 12/10/2015 by jeff from gastonia, nc

                      1 answer

                      • CUSTOMER CARE

                        A:

                        Hi Jeff, I am happy to help! I do apologies about the trouble your having with your Blazer. The best advice i can give you is to visit a certified shop to get a diagnostic on the issue with the vehicle.

                        Answered on 12/11/2015 by Roy from AAP
                    • Q:

                      Is this negative back pressure I have a 1990 chevy suburban v1500 FI 5.7L
                      Asked on 9/15/2015 by aabcoinc

                      1 answer

                      • CUSTOMER CARE

                        A:

                        Hi Aabcoinc, I'm glad to assist you. This CARQUEST by BWD EGR Valve (Part No. EGR101D) is a negative back pressure valve.

                        Answered on 9/16/2015 by Solomon
                    • Q:

                      EGR101D: for 1990 chevy suburban v1500 FI 5.7 L......is this valve negative back pressure like OE?
                      Asked on 9/15/2015 by Shadetree

                      1 answer

                      • CUSTOMER CARE

                        A:

                        Happy to help Shadetree! If the valve is negative back pressure is not available. It will function like an OE(original equipment) part. One thing to be aware of is the EGR Valve you linked Part No EGR101D corresponds with OE No 17113371, and 19210654. Another option we have is Part No EGR117D that corresponds with OE No 17111846 and 19210683. Be sure to check the OE number on your EGR before purchasing.

                        Answered on 9/15/2015 by Panda from AAP
                    • Q:

                      How can you tell if egr is bad?
                      Asked on 8/9/2014 by jeff from overland park,ks.66223

                      1 answer

                      • CUSTOMER CARE

                        A:

                        Hi Jeff, great question! An EGR valve works by recirculating used exhaust gases into your engine. These gases contain unburned fuel but very little oxygen, and they're very hot. A hot intake charge carries less oxygen, so a working EGR system effectively makes your engine act smaller than it really is. In terms of driving, an EGR valve that's stuck open will cause a noticeable drop in horsepower at the very least. Along with that may come detonation "knock" or "ping" under hard acceleration, and the attendant cylinder misfires. The engine will also see an open EGR valve as a massive vacuum leak, so expect hard starting and a very rough idle. An EGR stuck closed or clogged with carbon won't exhibit many symptoms, since engines don't technically need them to run. But expect a very noticeable drop in fuel economy, a noticeable gasoline smell from the exhaust pipe, a very hot catalytic converter, or all of the above. All modern vehicles monitor the EGR system, so any fault with the system should trigger a check-engine light. You'll get one anyway if the engine ends up detonating, misfiring or running rich; all of these will trigger diagnostic codes. But you should find EGR diagnostic codes along with them if the EGR is the source of the problem.

                        Answered on 8/14/2014 by Vincent from AAP
                    • Q:

                      i have a95 chevy 1500 with the 5 litre.after it warms up it hesitates pulling off and each gear after that(5spd).could the cause be the egr valve
                      Asked on 6/4/2013 by bt from roanoke va.

                      1 answer

                      • CUSTOMER CARE

                        A:

                        With reference to your inquiry on the BWD EGR Valve - part# EGR101D, the EGR valve may be the possible cause of the problem on your Chevy 1500. However, I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem. For any further assistance, you may also call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                        Answered on 6/4/2013 by Vincent from AAP
                    • Q:

                      I have a 94 chev with the 350 V8.
                      After it warms up and you drive in heavy traffic the check engine light comes on. When this happens the engine idle runs up and the truck shifts at much higher RPM's. You can turn the engine off and restart it and the truck runs fine. Any clue what causes this?
                      Asked on 11/17/2012 by Gary from Stafford, VA

                      1 answer

                      • CUSTOMER CARE

                        A:

                        With reference to this BWD EGR Valve - part# EGR101D, the EGR valve may be the possible cause of the problem on your Chevy 350. However, I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem. For any further assistance, you may also visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

                        Answered on 11/17/2012 by Vincent from AAP
                    • Q:

                      how can you tell if the egr valve is bad
                      Asked on 11/3/2011 by Anonymous

                      1 answer

                      • CUSTOMER CARE

                        A:

                        The required information has been mailed to the mail address provided.

                        Answered on 11/3/2011 by Vincent from AAP
                    • Q:

                      My truck runs fine until you let off of the gas to come to a stop then it lopes and almost dies several times then lines itself back out. I just replaced all vaccum lines and full tune up but the lines were not there to go the egr valve from the control solenoid. my question is does it go to the top or the bottom port on the solenoid. it is a 94 gmc suburban with a 350 tbi
                      Asked on 10/30/2011 by Rob from Virginia Beach, VA

                      2 answers

                      • CUSTOMER CARE

                        A:

                        You should attach the EGR solenoid to the top of the valve.

                        Answered on 11/3/2011 by Dennis from AAP
                      • A:

                        The vacuum line goes from the bottom port with the barb on it on the solenoid to the egr valve the top port is a vent

                        Answered on 7/30/2013 by buck from milw wi
                    • Q:

                      Does this EGR Valve include the gasket or does that need to be purchased separately?
                      Asked on 10/10/2011 by Anonymous

                      1 answer

                      • CUSTOMER CARE

                        A:

                        Yes, gasket is included with valve.

                        Answered on 10/11/2011 by Dennis from AAP
                    • Q:

                      Where does the line that connects to the egr value connect. Does it conect to the TBI. If so where?
                      Asked on 9/14/2011 by Roy from Clarkesville, Ga

                      1 answer

                      • CUSTOMER CARE

                        A:

                        For further assistance, please provide the year, make, model and engine size of the vehicle.

                        Answered on 9/17/2011 by Vincent from AAP
                    Displaying questions 1-10Previous | Next »

                    Do you have a question about this product? 

                    Check out the specials in our monthly flyer.
                     
                     
                    Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.