Name: Ignition Module
Brand: Carquest Premium
SKU: CBE1176
Price: 188.99 USD

from

$188.99

CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:

CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.

from

$58.25

Delphi ignition coils feature precise spark timing response for increased fuel economy and faster crank-to-run. The ignition coils provide accurate electrical energy to create a voltage potential at the spark plug, providing for superior engine performance that adjusts to driving and environment conditions. Plus, like all Delphi ignition system components, they enable engine management systems to maintain tighter control over emissions, economy and performance.

Product Features:

Improved dwell accuracy decreases module and coil temperatures for greater reliability
Noise abatement material between laminations reduces audible coil noise
Cassettes have improved primary connector for greater ease of assembly compared to designs with one connector for each coil
Lower primary inductance provides high-speed performance
Early and precise electronic spark timing helps improve fuel economy and provides faster crank-to-run
Higher energy delivered to combustible mixture provides cleaner combustion to help manufacturers meet on-board diagnostics (OBD II) requirements
Direct connection to spark plugs (via small boot) eliminates spark plug wires
Composite iron coils provide programmable energy
Coil per cylinder dwell overlap electronics deliver better high speed performance and better heat dissipation compared to some conventional technologies
Coil per cylinder ramp and fire electronics decrease power dissipation and increase efficiency
Radio frequency interference (RFI) suppressor optional

from

$40.99

Carquest Premium engine management products provide the right ignition coils for a wide range of domestic and import applications. They deliver the highest performance and durability under demanding conditions. Designed to meet OE quality and performance standards using top-quality components, our ignition coils are the best choice for your maintenance and repair needs.

Product Features:

Coils are designed and engineered to be an OE quality replacement for fit and performance
High-strength dielectric epoxy and 100% copper windings used to deliver high-temperature performance and vibration resistance
High-efficiency laminations produce a high-energy spark and reliable performance
Factories use ISO 9001 and IATF 16949 standards to deliver products designed to meet or exceed OE voltage output specifications
Top-quality components and materials used to deliver maximum performance and long service life under tough operating conditions

from

$56.99

NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK variable pitch magnetic core cables produce the necessary impedance to suppress interference throughout the entire frequency spectrum for exceptional EMI/RFI noise suppression. OE or better specified spark plug and distributor boots ensure the highest quality fit, performance and durability in every application. Spark plug boots are glued to NGK cable with a silicone sealer for a watertight seal. Stainless steel terminals utilizing up to 3 serrated crimps bite into cable jacket and inner insulation for the highest terminal retention strength (wherever possible). Locking C-shaped spring clip with corrosion-resistant plating ensures a secure and positive spark plug terminal connection.

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$29.99

CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$10.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$3.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$64.12

NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.

Product Features:

OE-Equivalent.
OEM style connectors for easy Installation.
Superior Firing and Fuel Savings
Outstanding Durability and Performance
Excellent Noise Suppression
Numbered for easy cylinder identification.
High quality EPDM and Silicone coverings.

from

$5.29

Champion® Platinum Power™ spark plugs deliver powerful performance. Made from exclusive Heat-Active™ alloy, a fine-wire center electrode and V-trimmed ground electrode provides sharp spark focus.

Product Features:

Platinum Power- Premium Spark Plug. Powerful Performance.
Platinum center electrode for long life
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active™ alloy allows electrodes to reach optimal temperature
Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug

from

$3.49

OE Performance, lasts 30K+ Miles, K16GPR-U11. The unique U-Groove ground electrode is one of the finest features of DENSO spark plugs, designed to fire leaner mixtures than conventional plugs for improved ignitability. Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads, ensuring a secure fit. With a wide range of part numbers for thousands of applications, including classic and collector cars, these spark plugs last twice as long as most conventional plugs. Each plug is 100% pre-fired to assure reliable operation, featuring a nickel center electrode tip and a flat seat type for optimal performance.

Product Features:

Patented U-groove ground electrode design fires leaner mixtures than conventional plugs
Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
Wide range of part numbers for thousands of applications, including classic and collector cars
Lasts twice as long as most conventional plugs
100% pre-fired to assure reliable operation
U-Groove Conventional
Long-Lasting Durability: Lasts over 30,000 miles, twice as long as most conventional spark plugs, providing extended performance and reliability.

from

$3.29

Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles, engineered to meet strict Ford engineering standards for performance and reliability. These spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption, and optimize emissions. They are resistant to oxidation and arc erosion, feature a multi-rib insulator to protect against misfire, and offer service intervals of up to 100,000 miles. Designed with high-quality materials, they provide reliable performance for almost any application and are backed by Motorcraft’s Service Parts Warranty. Motorcraft Spark Plugs are an exact fit for Ford, Lincoln, and Mercury vehicles, helping to prevent false check engine lights and ensuring your vehicle runs as it did when it was first manufactured.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.
Enhanced Durability: Engineered to meet strict Ford engineering standards, these spark plugs are designed to provide long-lasting performance and withstand harsh conditions.

from

$6.79

Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles, engineered to meet strict Ford engineering standards for unmatched performance and reliability. These spark plugs are precisely matched to specific engines, enhancing durability, eliminating misfires, reducing fuel consumption, and optimizing emissions. They are resistant to oxidation and arc erosion, feature a multi-rib insulator to protect against misfires, and offer service intervals of up to 100,000 miles. Backed by Motorcraft’s Service Parts Warranty, these spark plugs are an exact fit for Ford, Lincoln, and Mercury vehicles and are designed with high-quality materials to provide reliable performance for almost any application. Motorcraft ignition components also help prevent false check engine lights, ensuring your vehicle runs smoothly and efficiently.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.
Engineered for Ford Vehicles: Motorcraft Spark Plugs are original equipment on Ford, Lincoln, and Mercury vehicles, ensuring a perfect fit and optimal performance.

from

$97.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$9.99

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$42.99

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation