GMC Sierra 1500 Engine Cooling Parts

ACDelco GM Original Equipment Engine Cooling Fan Blades are located between the radiator and engine and are GM-recommended replacements for your vehicle’s original components. The fan is a part of the engine cooling system, which moves air across the radiator and A/C condenser to remove heat from the engine cooling system and the AC refrigerant system. The fan may be belt-driven or operated by an electric motor. This cooling fan blade has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

ACDelco GM Original Equipment Engine Cooling Fan Clutches control the speed of the radiator fan based on the temperature of the air after it passes through the radiator fins. This original equipment engine cooling fan clutch is a GM-recommended replacement for your vehicle’s original components and has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Quiets noisy cooling fans with stuck fan clutches, restores fuel economy
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

• Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
• Durable construction – this part is made of quality materials for a long service life
• Saves money – offers original equipment quality at a competitive price
• Quality assured – this petcock has undergone virtual testing to assure proper fit and function

An ACDelco GM Original Equipment Engine Coolant Water Inlet Seal is a GM-recommended replacement for your vehicle’s original component. It seals and helps prevent coolant from leaking out of cooling system components. This original equipment engine coolant water inlet seal has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Seals and helps prevent coolant from leaking out of cooling system components to maintain the proper engine temperature
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

An ACDelco GM Original Equipment Engine Coolant Thermostat is a temperature controlled valve located in the engine coolant outlet to, or the inlet from, the radiator, and is a GM-recommended replacement for your vehicle’s original component. It controls the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature. This original equipment engine coolant thermostat has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Control the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Thermostat Housing

ACDelco GM Original Equipment Engine Coolant Water Outlets are housings that connect the radiator hoses to the engine, typically housing the engine coolant thermostat. For certain applications, the water outlet contains threaded holes or ports for sensors and switches. These original equipment engine coolant water outlets are GM-recommended replacements for your vehicle’s original components and have been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:

• Meets and/or exceeds OEM standard
• Includes quality gasket or O-ring to ensure proper seal (where applicable)
• Coated with corrosion and rust inhibitor
• 100% leak tested
• Direct-fit replacement for ease of installation

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

This engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles
• Ideal solution – this kit is a reliable replacement for original hardware that is missing or damaged
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

ACDelco Professional Water Pumps are the best way to make sure you have the proper heat protection for the engine in your car, truck or SUV. Built to meet the latest manufacturer-specified designs, ACDelco Water pumps, in both cast-iron and aluminum, are thoroughly pressure-tested to prevent leaks, and feature uniform wall sections and smooth coolant-flow cavities for efficient operation and superior engine protection. High-quality bearings, heat-treated impellers and coated seals mean long life and trouble-free ownership.

Product Features:

• Original equipment design and quality
• 100% new with no remanufactured parts
• High quality cast housing
• Advanced bearing design for high axial and radial stresses
• Advanced sealing technology
• Optimum cooling performance and longevity

ACDelco Professional Engine Coolant Temperature Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

• Professional, premium aftermarket replacement
• Provides the performance and dependability you expect from ACDelco
• Manufactured to meet expectations for fit, form, and function

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

• Adjustable thermostatic fan control
• 160°F – 210°F thread-in probe
• For use with Imperial electric fans
• Thread-in probe for installation in water jacket or radiator

Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:

• Ideal for rigid cast aluminum parts
• Meets OEM Specifications
• Sensor safe & non-corrosive
• Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
• Blowout resistant, allowing leakproof gaskets to be made in just one minute
• Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
• Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
• Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
• Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.

ARP timing cover bolts are available in both polished stainless steel or black oxide finish chrome moly. You also can choose between standard hex head bolts or compact 12 point fasteners. Also available as part of ARP complete engine and accessory kits. Studs are preferred by many pro engine builders because they eliminate the chance of pinching gaskets and contribute to easier engine assembly. You will note that ARP studs feature a special bullet nose to guide the nut accurately into place. Available in black oxide finish 8740 chrome moly or polished stainless steel with hex or 12 point nuts. Alternators that come loose are a pain, so That is why ARP came up with these super tough bolts (your choice of chrome moly steel or polished stainless (ARP 300) both rated 170,000 PSI). The stainless has the added advantage of being rust and corrosion resistant. It is the fastener of choice.

Product Features:

• Made From Black Oxide Finished 8740 Chrome Moly Or Corrosion Resistant Stainless Steel
• Nominally Rated At 170,000 PSI Tensile Strength
• Professional Quality Fasteners
• Made In USA
• Hex Head
• Sold As A Kit

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

• Maintains proper cooling system pressure
• Easy installation and removal
• 100% tested to ensure proper pressure and longevity
• Meets all OEM specifications

New Standard Replacement Radiator Support, Upper Deflector

Product Features:

• Upper Deflector, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

An ACDelco GM Original Equipment Expansion Tank Cap is a spring loaded cap that seals the radiator filler neck or surge tank, and is a GM-recommended replacement for your vehicle’s original component. It maintains pressure on the cooling system while the engine is operating, which raises the boiling point of the engine coolant. It also replenishes the system with coolant from the expansion tank (if equipped) when the engine cools off. This original equipment radiator cap has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Get the GM quality you know and trust with ACDelco GM Original Equipment Thermostats and Caps. Stay with the brand of parts your General Motors vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Thermostats and Caps are engineered for virtually every model of GM car, light duty truck, and sport utility vehicle.

Product Features:

• Seal and maintain pressure on the cooling system for vehicle safety
• Raise the boiling point of the engine coolant to maintain efficiency
• Fit most models of GM vehicles for expanded coverage
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

New Standard Replacement Driver Side Radiator Support Baffle

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Product Features:

• Motors built and tested to quality specifications
• 14 in. universal fit reversible fan
• 1250 CFM
• UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design
• Manufactured for the sealing repair environment
• Validated for fit, form, and function
• Quality that you can trust

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

• Machined metal construction
• Works with MT-300 pressure tester
• Tests coolant caps
• Professional quality

All our Multi-Purpose Retainers are made of high quality materials for long-lasting durability. Offering a full line of Multi-Purpose Retainers for a wide range of applications.

Product Features:

• Durable nylon design for a long service life
• Also suitable for a broad variety of industrial and commercial uses
• Conveniently packaged in a variety of piece counts
• Direct replacement Retainers available (where applicable) to ensure a proper fit

Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

• Built to meet or exceed OE fit, form and function
• All components necessary for installation are supplied with pump
• 100% tested for reliable performance
• Follow all enclosed instructions to maximize pump life and validate warranty