Ford F-150 Suspension Parts

SuspAirBag/Bellows

SuspAirBag/Bellows

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Simple And Easy To Install

Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:

• REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
• EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
• CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
• LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade

Product Features:

• Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
• Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
• All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

• Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
• Gas-charged unit
• Improved handling and control
• Economical OE replacement
• Meets OE product specifications

Belltech has developed the solution to correct the lackluster handling and performance of today factory strut equipped trucks and Suv, utilizing the next generation valving technology of our new Trail Performance Shock line. In true Belltech style, combining our new leveling strut spacers with both front and rear Trail Performance shock absorbers you receive a complete solution to level your stance and rejuvenate those worn out OEM shocks and struts.

Product Features:

• Direct Bolt-In, No Additional Modifications
• Allows For Installation Of Larger More Aggressive Wheel/Tire Combo
• Easy To Install

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

• The Highest Quality Replacement Strut Mount Available
• Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
• Superior Rubber Reduces Noise, Vibration And Harshness
• Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
• Matched Grade Studs And Nuts

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle’s stock shackle.

Product Features:

• Direct replacement – This leaf spring shackle fits and performs like original equipment shackle
• Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life
• Excellent value – original equipment quality at a lower price
• Ready to install – all essential hardware is included for an easy installation

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

• Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
• Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
• Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
• Versatile component – this connector can be used in a variety of repairs and custom installations

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

• Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
• Poly Foam Bumper Prevents The Strut From Bottoming Out
• Built With Design And Quality That Matches Or Exceeds One
• Protects The Upper Seal And Bushing

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available

Energy’s C-bushings for Ford trucks are a firmer durometer than O.E.M. rubber ones. They maintain proper caster alignment during all adverse conditions. Three degree styles are available to accommodate various vehicle lift configurations. They are available in 2, 4 and 7 degree positive caster, for stock and two height altered suspension configurations.

Product Features:

• Made of Superior Hyper-Flex+ Material
• Maintain Proper Caster Alignment
• Maximum Tensile Strength

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

• Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
• Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
• Springs are built with U.S. grade steel and designed to match factory ride height and performance
• OE quality strut mount, bearing plate and brackets
• Complete strut assembly is extensively tested for functionality and durability
• Built with a micro-smooth, chrome-plated piston rod

Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.

UPPER SHOCK MOUNT

Softride(R) is the best way of describing the ride quality of our long Add-A-Leafs. The Softride(R) long Add-A-Leafs will bring new life and lift to your fatigued stock springs. And you can rest easy knowing that the Skyjacker(R) Softride(R) technology is at work in each pair. Also available are the Heavy-Duty Add-A-Leafs. These units are shorter and are designed for extra payload capacity. Tie bolts are included in each pair of Skyjacker(R) Add-A-Leafs. Also available are fitted leafs. Fitted leafs are designed as an option exclusively for Skyjacker(R) Softride(R) lifted leaf springs. These are used when the additional weight of aftermarket accessories are installed such as a heavy winch bumper, an engine conversion, a swing away tire carrier, all your extra gear, etc.

Product Features:

• Softride(R) Long Add-A-Leafs Will Bring New Life And Lift To Your Fatigued Stock Springs And You Can Rest Easy Knowing That The Skyjacker(R) Softride(R) Technology Is At Work In Each Pair
• Add-A-Leafs Available Are The Heavy-Duty, Units Are Shorter And Are Designed For Extra Payload Capacity
• Tie Bolts Are Included In Each Pair Of Skyjacker(R) Add-A-Leafs
• Add-A-Leafs Also Available Are Fitted Leafs. Fitted Leafs Are Designed As An Option Exclusively For Skyjacker(R) Softride(R) Lifted Leaf Springs
• Fitted Leaf Springs Are Used When The Additional Weight Of Aftermarket Accessories Are Installed Such As Heavy Winch Bumper, An Engine Conversion, A Swing Away Tire Carrier, All Your Extra Gear, Etc.

POWER STEERING FLUID

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.

Product Features:

• Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
• Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
• Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
• Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA

Finish: Zinc Plated Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUV’s with a front coilover style suspension. The monotube shocks feature a 46mm digressive piston with self-adjusting deflective disc valving. Multiple snap-ring grooves in the shock body allow for different spring seat positions, providing 0-2.5 inch of front end lift, depending on application. The Bilstein B8 5100 (Ride Height Adjustable) shock absorber provides increased wheel travel and improved handling and feature a zinc-plated steel body for resistance to harsh off-road elements.

Product Features:

• An extremely affordable and practical alternative to coil spring spacers.
• BILSTEIN’s superior monotube design
• Utilizes the vehicle’s stock front coil springs
• Zinc finish with multi-layer unique BILSTEIN coating for extreme protection
• Self-adjusting deflective disc valving with independent rebound and compression tuning Note: Spring is not included.