Chevrolet Silverado 2500 HD Flywheels & Flexplates

Flywheels & Flexplates for a Chevrolet Silverado 2500 HD

Use the fitment form at the top of the page to select your exact year and engine type for your Chevrolet Silverado 2500 HD.

• 

  ATP - Automatic Transmission Flex Plate (Part No. Z-270)

  Description

  Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
  
  Product Features:

  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2021-01-18

    5

    5

    Good fit

    Good fit

    Submitted 2021-01-18

    By Harald

    From Undisclosed

    Used to adapt a 4L80E to a 6.0LS engine, worked great. It's nice that it comes with the long crankshaft bolts that allow for the spacer

    Bottom Line NULL

    Used to adapt a 4L80E to a 6.0LS engine, worked great. It's nice that it comes with the long crankshaft bolts that allow for the spacer

    By Harald from Undisclosed

    BOTTOM LINE NULL

  • 3

    3

    2016-09-12

    3

    3

    I would buy this again

    I would buy this again

    Submitted 2016-09-12

    By The kid

    From Boca

    It was cool

    Bottom Line recommended

    It was cool

    By The kid from Boca

    BOTTOM LINE recommended

  • 5

    5

    2016-06-15

    5

    5

    I would buy this product again

    I would buy this product again

    Submitted 2016-06-15

    By Ducky

    From Cullman, ALabama

    I like buying from advance online because the products they sell are as good or better then the competitors. i also like the online discounts i receive . The flex plate i purchased while not the exact OEM design has been working great so far. The knocking i got from a broken flex plate is gone. hahahaha I would recommend this product to anyone needing a new one. This part will do the job and won't empty your wallet. I would like to see more of a OEM part when i purchase parts for my vehicles but as long as they fix the problem and last , i am a happy customer. Thanks Advance Auto

    Bottom Line recommended

    I like buying from advance online because the products they sell are as good or better then the competitors. i also like the online discounts i receive . The flex plate i purchased while not the exact OEM design has been working great so far. The knocking i got from a broken flex plate is gone. hahahaha I would recommend this product to anyone needing a new one. This part will do the job and won't empty your wallet. I would like to see more of a OEM part when i purchase parts for my vehicles but as long as they fix the problem and last , i am a happy customer. Thanks Advance Auto

    By Ducky from Cullman, ALabama

    BOTTOM LINE recommended

  from $114.99

  View Product
• 

  ATP - Automatic Transmission Flex Plate (Part No. Z-269)

  Description

  Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
  
  Product Features:

  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation

  4.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 5

    5

    2021-12-27

    5

    5

    Perfect replacement for my LS

    Perfect replacement for my LS

    Submitted 2021-12-27

    By Wisky

    From Pasco,wa

    Looks stronger than the factory flexplate prone to cracking.

    Bottom Line recommended

    Looks stronger than the factory flexplate prone to cracking.

    By Wisky from Pasco,wa

    BOTTOM LINE recommended

  • 4

    4

    2020-02-29

    4

    4

    Recommend

    Recommend

    Submitted 2020-02-29

    By Lee

    From Undisclosed

    Direct replacement

    Bottom Line NULL

    Direct replacement

    By Lee from Undisclosed

    BOTTOM LINE NULL

  • 1

    1

    2019-05-22

    1

    1

    Bad Experience

    Bad Experience

    Submitted 2019-05-22

    By Venger

    From NC

    New, out of box install. Finally advised flexplate defective after extensive labor ans labor costs. OE parts from dealer, $250+ solved issure right away. Returning for refund, a shame no warranty labor reimbursement anymore!

    Bottom Line not recommended

    New, out of box install. Finally advised flexplate defective after extensive labor ans labor costs. OE parts from dealer, $250+ solved issure right away. Returning for refund, a shame no warranty labor reimbursement anymore!

    By Venger from NC

    BOTTOM LINE not recommended

  from $94.99

  View Product
• 

  ATP - AT FLEX PLATE (Part No. Z-498)

  1.0

  Read 1 review(s)

  Review snapshot ® by PowerReviews

  1.0

  1.0

  • 1

    1

    2021-11-17

    1

    1

    Exact fit, NOT !!!!! More expensive,isn't always better

    Exact fit, NOT !!!!! More expensive,isn't always better

    Submitted 2021-11-17

    By Rick

    From Clarksville,TN

    This is junk. I had to pay twice to have it installed.This one,the stamping of the flywheel was 1/8" different than the OEM flywheel.After the shop pulled the transmission for the second time,they discovered it was rubbing a hole in my oil pan.Every time you increased rpm's off of idle it flexed and was rubbing the oil pan.It ate up the bendex on 2 brand new starters. Luckily they were under warranty.But it cost me 450$ two times to have this piece of junk replaced with the less expensive flywheel,which "WAS" an exact fit as advertised.Unlike this thing which was also advertised as "AN EXACT FIT". Well it wasn't. Because I purchased the part myself and gave it to my mechanic,ADVANCE will not reimburse me for the 2nd labor charge. WHAT THE HECK ? Why should it matter who bought the part,it should matter that it was professionally installed by a licensed shop.I have been shopping at this location since the doors opened,probably over 75,000$ life time spending there.I built two complete hotrods using parts from ADVANCE. That may just have to end and I'll go up the street to someone else. "VERY DISAPPOINTING"

    Bottom Line not recommended

    This is junk. I had to pay twice to have it installed.This one,the stamping of the flywheel was 1/8" different than the OEM flywheel.After the shop pulled the transmission for the second time,they discovered it was rubbing a hole in my oil pan.Every time you increased rpm's off of idle it flexed and was rubbing the oil pan.It ate up the bendex on 2 brand new starters. Luckily they were under warranty.But it cost me 450$ two times to have this piece of junk replaced with the less expensive flywheel,which "WAS" an exact fit as advertised.Unlike this thing which was also advertised as "AN EXACT FIT". Well it wasn't. Because I purchased the part myself and gave it to my mechanic,ADVANCE will not reimburse me for the 2nd labor charge. WHAT THE HECK ? Why should it matter who bought the part,it should matter that it was professionally installed by a licensed shop.I have been shopping at this location since the doors opened,probably over 75,000$ life time spending there.I built two complete hotrods using parts from ADVANCE. That may just have to end and I'll go up the street to someone else. "VERY DISAPPOINTING"

    By Rick from Clarksville,TN

    BOTTOM LINE not recommended

  from $243.99

  View Product
• 

  Carquest Premium - New Flywheel (Part No. 50-2776)

  Description

  Flywheel hot spots can cause chatter. Resurfacing a flywheel doesn't always remove hot spots. The flywheel may look shiny and pretty, but the hot spots will often still be there. Service the System by replacing the flywheel and the clutch set at the same time. All flywheels come with a new ring gear.
  
  Product Features:

  • Casting process closely monitored to ensure uniform density and balance retention
  • Eliminates chance of chatter due to hot spots not always removed by resurfacing
  • New ring gear ensures positive starter engagement
  • Engineered to properly fit the intended application with no modifications

  from $131.99

  View Product
• 

  LuK - OE Quality Flywheel (Part No. LFW387)

  Description

  LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new - never remanufactured - every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.

  from $199.99

  View Product
• 

  ATP - Automatic Transmission Flexplate (Part No. Z-492)

  from $290.99

  View Product
• 

  LUK - Flywheel (Part No. I1000835622LUK)

  from $676.11

  View Product
• 

  LuK - OE Quality Dual Mass Flywheel (Part No. DMF029)

  Description

  LuK: Don't gamble - stay with the original DMF! The DMF prevents damages solid flywheels may cause. The Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous - from increased wear of engine mounts through gearbox failure to damaged crankshafts.

  from $541.99

  View Product
• 

  LUK - Flywheel (Part No. I1000835835LUK)

  Description

  LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new - never remanufactured - every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.
  
  Product Features:

  • OE quality and direct fit application
  • Made from high quality steel
  • Designed to reduce clutch chatter and vibration
  • Dynamically balanced

  from $226.30

  View Product