BMW 525i Drivetrains
Top BMW 525i Drivetrains Categories
We carry over 67 Drivetrains in inventory for the BMW 525i. If you’re looking for aftermarket Drivetrains for your BMW 525i, check out all these categories:
Essential BMW 525i Drivetrains
National – Multi Purpose Seal (Part No.223802)
from
$8.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Febi – Axle Shaft Nut (Part No.K403024787FEB)
from
$24.32
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Rein – CV Boot Kit (Part No.BKN0172)
from
$15.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches original equipment design specifications
Corteco – Diff. Side Cover Sea (Part No.J7041108125CFW)
from
$14.85
Diff. Side Cover Sea
Original Equipment – DIFFERENTIAL DRAIN P (Part No.J7065433208OEA)
from
$7.39
DIFFERENTIAL DRAIN P
Dorman – Driveshaft Flex Coupler (Part No.935-403)
from
$55.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles
- Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Rein – Differential Plug (Part No.HWP0065)
from
$7.99
Rein Automotive OE quality oil drain plugs are made with premium materials and designed and manufactured to be direct-fit replacements. Rein oil drain plugs are designed to tight tolerances to ensure proper sealing.
Product Features:
See More
Product Features:
- Designed to tight tolerances to ensure proper sealing.
- Rein Oil Drain Plugs are coated for high corrosion resistance.
- Designed and constructed to strict engineering quality standards.
- Includes copper sealing gasket.
Corteco – Differential Side Cover Seal, 90 x 44 x 10 (Part No.J7041238121CFW)
from
$20.34
Differential Side Cover Seal, 90 x 44 x 10
Valvoline – VAL EP ATF 6/1 QT (Part No.899179)
from
$14.99
VAL EP ATF 6/1 QT
Timken – Input Shaft Seal (Part No.J1156280261TIM)
from
$12.93
Input Shaft Seal
Rein – Drive Shaft-Ctr Support Bearng (Part No.BEM0039P)
from
$13.99
Drive Shaft-Ctr Support Bearng
GKN Drivetech – Axle Assembly, New (Part No.K4000299615GKN)
from
$378.55
GKN Drivetech (Lobro) manufactures a replacement Axle Assembly that is optimized for weight, noise, vibration, harshness (NVH), steering and suspension performance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Improved space utilization through power unit and gearbox repackaging potential.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
- Optimum power delivery for peak vehicles
Rein – Bushing (Part No.AVB0361R)
from
$106.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
- Recommend to replace bushings in pairs to ensure best performance. Note: Control Arm Bushing Kits contain the needed pair.
SKF – Differential Pinion Bearing (Part No.J7020289131SKF)
from
$70.44
Differential Pinion Bearing
GKN Drivetech – CV Boot Kit (Part No.K6010187215LOB)
from
$41.42
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot. SPIDAN and LOBRO boot kits contain all the individual parts needed for professional repairs: boot, boot circlips, tightening straps, bolts, nuts, spacers, etc.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
Rein – Drive Shaft Mount Assembly (Part No.AVS0053R)
from
$44.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- Produced by an Original Equipment supplier
- Manufactured to strict engineering standards/specifications in materials and tolerances
- All bearings included are produced by an OE manufacturer ensuring the highest quality and performance
- All driveshaft mount assemblies come with the bearing pre-installed ensuring proper bearing alignment, reducing installation time
- Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
National – Multi Purpose Seal (Part No.470672)
from
$14.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.1979)
from
$13.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Corteco – Driveshaft Bushing (Part No.K1050292291CFW)
from
$12.55
The Corteco Driveshaft Bushing is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Driveworks – Ball Bearing (Part No.S-201-CC)
from
$1.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Shaft Repair Sleeve (Part No.99177)
from
$39.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Dorman – Rear Drive Shaft (Part No.976-797)
from
$1455.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
FAG – Wheel Hub Assembly (Part No.K700177924FAG)
from
$229.92
FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle. The FAG wheel hub assembly is a highly integrated unit with flanges for the brake disc, wheel and knuckle, which allow the highest possible running accuracy. Integrated speed encoders generate the signals required for steering the vehicle (ABS/ESP). The bearing clamping force is applied and controlled by FAG via an orbital formed shoulder.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Maintenance free
- Premium modified bearing steel
- Lubricated with specially developed greases
- Optimized sealing systems
National – Shaft Repair Sleeve (Part No.99157)
from
$37.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Bearings (Part No.HM88510)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
BMW 525i Drivetrains Categories
Helping You Find the Right Drivetrains for Your BMW 525i
You love your 525i. So we’ve made it easier than ever to help you find BMW 525i Drivetrains in our online catalog. Our inventory holds 67 aftermarket and OEM Drivetrains for your BMW 525i, ranging from $1.99 to $1,455.99.
We offer parts from 19 brands trusted to make quality Drivetrains for your BMW 525i. Before you buy, take some time to read through customer reviews. We currently have 396 reviews of BMW 525i Drivetrains from previous customers. Some of the top rated parts include Bearings with 2.5 stars and Wheel Hub Assembly with 2.0 stars.
Find your 525i Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your BMW 525i part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your BMW 525i
Our inventory holds Drivetrains for your BMW 525i from 19 trusted brands. You’ll find OEM and aftermarket parts from brands like Royal Purple, Idemitsu, and National, all of which can keep that BMW happy.
We have Idemitsu parts available for your BMW 525i in categories like Differentials. Some of the top-rated Idemitsu parts in these categories are:
Top-Rated Royal Purple Drivetrains
Leading Royal Purple Drivetrains
We carry Royal Purple brand parts for your BMW 525i across several catalog categories, including Differentials. Some of our most reviewed Royal Purple parts include:
FAQs for BMW 525i Drivetrains
What are the most purchased Drivetrains for the BMW 525i?
Out of 67 Drivetrains for the BMW 525i, the most popular in our inventory are:
What are the top-rated BMW 525i Drivetrains?
Top-rated Drivetrains for your BMW 525i based on customer reviews/ratings are:
from
$229.92
(2)
Wheel Hub Assembly
“Just wish if I order a line and it says everything included to install and when I get it I need additional fittings which ended up being incorrect as ”
from
$39.49
(1)
Shaft Repair Sleeve
“Easy to use, too early to tell how long it will last. It did stop the oil leak with a new oil seal on the front crankshaft pulley. 87 mercedes 300td.”
