2021 GMC Savana 3500 Drivetrains

Below you will find various in-demand GMC Drivetrains, components and accessories for your 2021 Savana 3500. Advance Auto Parts has popular Savana 3500 parts like Universal Joints, 4WD Components, Differentials and more. You’ll also find aftermarket and OEM Drivetrains for other Savana 3500 model years including 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2022 and more. Select a category of 2021 GMC Savana 3500 Drivetrains below and start saving instantly.

Popular 2021 GMC Savana 3500 Drivetrains Categories

Differential Oil

Axle Shaft Universal Joints

U-Joints

U-Joint Strap Kits

Drive and Prop Shaft Assemblies

Differential Bearings

Differential Axle Shafts

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Pinion Seals

Axle Flange Gaskets

Rear Housing Cover Gaskets

4WD Actuator Connectors

Essential Drivetrains for 2021 GMC Savana 3500s

from

$1846.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$1005.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$23.99

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$42.99

from

$367.99

Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:

Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$438.99

Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$40.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$169.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Premium seal design keeps out dirt and contaminants and retains lubrication in bearing
Integral ABS encoder seal where applicable
Professional technicians know they can depend on National

from

$35.49

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$9.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$10.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$52.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$169.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

KIT BRG & SEAL DANA 70 HD

from

$293.99

This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.

Product Features:

Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications
Related repair – smart to have on hand when installing a differential ring and pinion
Durable construction – built for reliable longevity, free of defects in materials and workmanship
Trustworthy quality – backed by team of designers and engineers in the United States
Contents: Bearings; Shims; Crush Collar; Hardware; Gasket Material; Gear Marking Compound; Application Brush; Thread Lock Compound

from

$137.99

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil

from

$10.29

Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. Idemitsu is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. Idemitsu application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings

from

$45.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Product Features:

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$49.99

from

$15.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

For U-Joints 330, 330A, 331 & 331A
Contains two 1.66″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws

from

$22.99

This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.79

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$19.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$23.99

Product Features:

Cross pin bolt
Fits GM 9.5″ and 9.25″ IFS

from

$11.29

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$54.99

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

from

$55.99

from

$51.99

Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.

from

$84.99

Yukon 1410 Lifetime Series U/Joint. 4.188″ span ring span. 1.188″ cap diameter. Outside snap ring.

Upgrade your 2021 GMC Savana 3500 with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2021 GMC Savana 3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Drivetrains are key to keeping your Savana 3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 23 Drivetrains for the 2021 GMC Savana 3500, designed to meet your needs without breaking the bank. From Universal Joint replacements to 4WD Components upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2021 GMC Savana 3500 at great prices. Our Drivetrains inventory for this model ranges from just $5.79 to $1,269.99, with an average price of $147.04. Our 23 Drivetrains in stock come from 11 trusted brands, so you’re sure to find the right part for your 2021 GMC Savana 3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2021 GMC Savana 3500, we stock popular OEM and aftermarket Drivetrains from top names like Royal Purple, Spicer, Moog, and more. Royal Purple Drivetrains start at just $41.99 and boast an impressive 4.8 stars average rating from customers. Spicer and Moog also bring quality to the table, with Drivetrains available starting at $45.99, and at an average 4.6 stars rating. With 2,247 customer reviews and counting, our 2021 GMC Savana 3500 Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2021 GMC Savana 3500 is always ready to roll. We’re committed to providing you with everything you need to keep your Savana 3500 in top shape, all in one place. Start shopping confidently below for your 2021 GMC Savana 3500!

Best-Selling Universal Joints for 2021 GMC Savana 3500s

Enhance the driving experience in your GMC with 9 quality Universal Joint components, starting at $22.99.

show more show less

from

$54.99

from

$59.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$46.99

Product Features:

COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$46.99

Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$54.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for fleets, off-highway and commercial vehicles
STRONG AND DURABLE – Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
GREASEABLE DESIGN – Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
INHIBITS PREMATURE WEAR – Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
RELIABLE PERFORMANCE – Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$64.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$54.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$55.99

from

$22.99

Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Top Picks for 2021 GMC Savana 3500 Differentials

Upgrade GMC Savana 3500s with top-quality Differentials parts, including 10 OEM and aftermarket selections for your 2021 model.

show more show less

from

$41.99

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

Better wear protection
Increased fuel efficiency
Better protection of the expensive catalytic emission system
Improved compatibility with fuels containing ethanol
Superior corrosion protection
Meets ILSAC GF-5 and Dexos1 performance requirements

from

$14.49

Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$18.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$18.99

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:

FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations.
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

from

$438.99

Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$23.99

from

$533.99

Product Features:

Each LuK GearBOX contains all the OE quality bearings needed for a professional transmission repair
LuK Differential Bearing Kits are designed to meet or exceed OEM requirements. This will ensure customer satisfaction.
LuK Differential Bearing Kits contain the bearings and seals needed to complete the job.
LuK Differential Bearing Kits include wear parts such as seals, O-rings, shaft sealing rings, support bearings and spare parts where necessary for eliminating the specific cause of failure.

from

$507.99

Product Features:

Each LuK GearBOX contains all the OE quality bearings needed for a professional transmission repair
LuK Differential Bearing Kits are designed to meet or exceed OEM requirements. This will ensure customer satisfaction.
LuK Differential Bearing Kits contain the bearings and seals needed to complete the job.
LuK Differential Bearing Kits include wear parts such as seals, O-rings, shaft sealing rings, support bearings and spare parts where necessary for eliminating the specific cause of failure.

from

$169.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Premium seal design keeps out dirt and contaminants and retains lubrication in bearing
Integral ABS encoder seal where applicable
Professional technicians know they can depend on National

from

$28.99

Axle Housing Cover Gasket

In-Demand Drive Shafts and Axles for 2021 GMC Savana 3500s

Select from 3 premium Drive Shafts and Axles parts for your 2021 GMC Savana 3500, with prices ranging from $5.79 to $1,269.99.

show more show less

from

$45.99

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$5.79

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$1269.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

Top-Rated Drivetrains Brands For Your 2021 GMC Savana 3500

Shop for the best-rated brands offering Drivetrains and other products for your 2021 GMC Savana 3500s. Below you’ll find some of our best rated Drivetrains from Royal Purple, Spicer, and Moog, and more. Drivetrains from these brands that fit a 2021 Savana 3500 start at just $41.99 and are rated as high as 4.8 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Royal Purple 2021 GMC Savana 3500 Drivetrains

When it comes to maintaining or upgrading your 2021 GMC Savana 3500, using quality Drivetrains is essential to ensure durability and a perfect fit. Royal Purple ticks all of those boxes. We offer a wide selection of Royal Purple Drivetrains, specifically designed for the 2021 GMC Savana 3500. With over 1 Royal Purple brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $41.99. Plus, with over 133 customer reviews and an average rating of 4.8 stars, you can trust that our Royal Purple Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $41.99

(133)

High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart

“The best”

Popular Spicer 2021 GMC Savana 3500 Drivetrains

Spicer auto parts is one of the highest quality Drivetrain brands in the market. Any 2021 GMC Savana 3500 owner should feel confident when installing genuine Spicer parts in their vehicle. To ensure the best fit and performance for your 2021 Savana 3500, Advance Auto Parts carries a full inventory of 2 Spicer Drivetrains. Plus you will be keeping your GMC in peak condition while saving money because prices on these Spicer Drivetrains range from $45.99 to $54.99, plus, with more than 11 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $45.99

(10)

Universal Joint, Greaseable 1410 Series

“Went in perfect”

from $54.99

(1)

Universal Joint

“Spicer U joints are great. These are actual OE parts on my truck.”

FAQs for 2021 GMC Savana 3500 Drivetrains

Which Drivetrains are best-sellers for 2021 GMC Savana 3500s?

Out of 23 Drivetrains that fit 2021 GMC Savana 3500s, the following parts are the top sellers:

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (12507273) – $18.99
Greaseable Super Strength Universal Joint (10086981) – $59.99

What’s the price range for 2021 GMC Savana 3500 Drivetrains?

Drivetrain prices for the 2021 GMC Savana 3500 start at $5.79 and go up to $1,269.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2021 GMC Savana 3500?

The average price for Drivetrains for the 2021 GMC Savana 3500 is $147.04. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other GMC Savana 3500 model years?

Yes, we currently carry Drivetrains for 28 model years of GMC Savana 3500s between 1996 and 2025. Drivetrains are bought most frequently for the following model years: 2022, 2020, 2019, 2018, 2017, 2016, 2015, 2014, and 2013.

What are the cheapest Drivetrains for my 2021 GMC Savana 3500?

The cheapest 2021 GMC Savana 3500 Drivetrains we carry in stock are:

Drive Axle Shaft Flange Gasket 8 Bolt Hole Gasket, 2.719 Inch Inside Diameter, 4.438 Inch Outside Diameter (19780167) – $5.79
DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
Tapered Cone Wheel Bearing Assembly (5052270) – $18.49
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (12507273) – $18.99
U-Joint Replacement Kit (50273253) – $22.99

What are the top-rated Drivetrains that fit the 2021 GMC Savana 3500?

Out of 2,247 reviews by customers, our 2021 GMC Savana 3500 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2021 GMC Savana 3500 and their top-rated products:

Differentials
- DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
- High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart (11150912) – $41.99
- Tapered Cone Wheel Bearing Assembly (5052270) – $18.49
Universal Joints
- DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
- High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart (11150912) – $41.99
- Tapered Cone Wheel Bearing Assembly (5052270) – $18.49

What types of Drivetrains do you sell for my 2021 GMC Savana 3500?

As of 11/2/25, these are some of the most in-demand types of Drivetrains for a 2021 GMC Savana 3500:

Can I get help with 2021 GMC Savana 3500 Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Drivetrains and more.

What is your return policy for GMC Savana 3500 Drivetrains?

Advance Auto Parts keeps returns simple. For new GMC Savana 3500 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2021 GMC Savana 3500 Drivetrains

Dorman – Drive Shaft: Greaseable, Adjustable (Part No.976-103)

Dorman – Drive Shaft: Greaseable, Adjustable (Part No.976-816)

Motive Gear – Pinion Seal (Part No.26064030)

Motive Gear – Differential Pinion Seal (Part No.26064029)

Dorman – Axle Shaft (Part No.630-151)

Dorman – Axle Shaft – or Side (Part No.630-325)

National – Tapered Roller Bearing Cone (Part No.HM903249)

National – Wheel Bearing: Direct Fit, 1 Piece (Part No.A72)

ACDelco – Black Multi-Purpose Pigtail (Part No.PT2629)

Carquest Premium – Multi-Use Connector (Part No.PTA1271)

Felpro – Axle Housing Cover Gasket Oval Shaped 10 Bolt Hole Gasket (Part No.RDS 55028-1)

Felpro – Axle Housing Cover Gasket Oval Shaped 10 Bolt Hole Gasket (Part No.RDS 55480)

Motive Gear – Differential Bearing Kit – Koyo (Part No.R70HR)

Dorman – Ring and Pinion Master Bearing and Installation Kit (Part No.697-038)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Idemitsu – Type HP Automatic Transmission Fluid , 1 Quart (Part No.10107-042F)

Spicer – Universal Joint, Greaseable 1410 Series (Part No.5-160X)

Spicer – Universal Joint (Part No.5-1350-1X)

MOOG Driveline Products – Universal Joint Strap Kit (Part No.492-10)

Dorman – Help – U-Joint Replacement Kit (Part No.13862)

Felpro – Drive Axle Shaft Flange Gasket 8 Bolt Hole Gasket, 2.719 Inch Inside Diameter, 4.438 Inch Outside Diameter (Part No.55350)

National – Tapered Roller Bearing Cone (Part No.LM501349)

Yukon Gear – Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS (Part No.33342)

FAG US – Cup (Part No.M88010)

Spicer – Universal Joint (Part No.5-1410X)

Spicer – Universal Joint (Part No.5-1410-1X)

Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)

Yukon Gear – 1410 Lifetime Series U/Joint (Part No.42022)

Spicer – Universal Joint (Part No.5-1410X)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.295)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.330)

Driveworks – Universal Joint (Part No.DW-330)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.351)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.282)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.281)

Spicer – Universal Joint (Part No.5-1410-1X)

Dorman – Help – U-Joint Replacement Kit (Part No.13862)

ACDelco – Black Multi-Purpose Pigtail (Part No.PT2629)

Royal Purple – High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart (Part No.51530)

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

Driveworks – Tapered Cone Wheel Bearing Assembly (Part No.S-387-AS)

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

Dorman – Axle Shaft – or Side (Part No.630-325)

Motive Gear – Pinion Seal (Part No.26064030)

LuK – Differential Repair Kit (Part No.GDK325B-MK)

LuK – Differential Repair Kit (Part No.GDK325B)

National – Wheel Bearing: Direct Fit, 1 Piece (Part No.A72)

Felpro – Axle Housing Cover Gasket (Part No.55498)

Spicer – Universal Joint, Greaseable 1410 Series (Part No.5-160X)

Felpro – Drive Axle Shaft Flange Gasket 8 Bolt Hole Gasket, 2.719 Inch Inside Diameter, 4.438 Inch Outside Diameter (Part No.55350)

Dorman – Drive Shaft: Greaseable, Adjustable (Part No.986-312)