In-store Pickup
Free Shipping Over $25
Free In-store Services
2014 Ford F-150 Serpentine Belt
2014 Ford F-150 Serpentine Belt
Your 2014 Ford F-150 might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Serpentine Belt product you desperately need.
We currently carry 11 Serpentine Belt products to choose from for your 2014 Ford F-150, and our inventory prices range from as little as $11.99 up to $37.49.
On top of low prices, Advance Auto Parts offers 3 different trusted brands of Serpentine Belt products for the 2014 Ford F-150. We only sell parts from trusted brands like CARQUEST by Dayco so that you can find quality parts you can count on.
Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 233 reviews on our Serpentine Belt products for the 2014 Ford F-150 from previous customers.
Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Serpentine Belt stock in-person!
Serpentine Belt for Your 2014 Ford F-150
Search through our amazing selection of Serpentine Belt products for your 2014 Ford F-150 to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.
-
CARQUEST by Dayco - Poly Rib Belt, Premium (Part No. 5060640)
DescriptionDesigned for high mileage multiple-accessory drives, Dayco's W profile belt (patent pending) is the most innovative advancement in multi-rib belt design in over 25 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile has been specifically Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. The "W" profile cut into the tip of each rib makes the tip more flexible and eliminates belt chirp when the belt enters a worn or misalligned pulley. Constructed with Aramid reinforced EPDM compounds, the Dayco W profile belt delivers more than OE required quality...it delivers the solution to troublesome drive problems. Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications. This Poly-Rib Belt is another Dayco product proudly made in the USA.
Product Features:- The "W" profile rib has been engineered to conform to slight misalignments, the number one cause for belt noise
- Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
- No-Noise Advanced Design EPDM rubber compound for quiet extended life
- Made in the USA
Read 3 review(s)Review snapshot ® by PowerReviews
-
yes
yes
Submitted 2020-08-18
By Brent
From Undisclosed
so far so good
Bottom Line NULL
-
Yes
Yes
Submitted 2020-06-02
By Gary
From Undisclosed
Fit perfectly
Bottom Line NULL
-
Not "Made In USA"
Not "Made In USA"
Submitted 2020-05-18
By John The Fixer
From Clarence NY
I recently purchased this belt online, primarily because it was advertised on this website as a premium belt "Made In USA". I just returned it because the belt I received is labelled "Made In China". I cannot comment on the quality of the belt, but I did not receive what was advertised and it certainly was not what I placed the order for.
Bottom Line not recommended
from $23.99
View Product -
CARQUEST by Dayco - Poly Rib Belt, Premium (Part No. 5060550)
DescriptionDesigned for high mileage multiple-accessory drives, Dayco's W profile belt (patent pending) is the most innovative advancement in multi-rib belt design in over 25 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile has been specifically Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. The "W" profile cut into the tip of each rib makes the tip more flexible and eliminates belt chirp when the belt enters a worn or misalligned pulley. Constructed with Aramid reinforced EPDM compounds, the Dayco W profile belt delivers more than OE required quality...it delivers the solution to troublesome drive problems. Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications. This Poly-Rib Belt is another Dayco product proudly made in the USA.
Product Features:- The "W" profile rib has been engineered to conform to slight misalignments, the number one cause for belt noise
- Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
- No-Noise Advanced Design EPDM rubber compound for quiet extended life
- Made in the USA
Read 3 review(s)Review snapshot ® by PowerReviews
-
Will buy again
Will buy again
Submitted 2019-03-17
By Phil
From Undisclosed
Perfect fit
Bottom Line NULL
-
I would recomend and buy this product again.
I would recomend and buy this product again.
Submitted 2017-09-26
By Eric
From undisclosed
OEM top of the line serpentine belt, what can I say? Perform like the original. Good price with using coupon.
Bottom Line NULL
-
Belt
Belt
Submitted 2013-01-06
By Thomas
From Vero Beach, FL
Have used these belts before. Simple, easy to install and I have never had a failure due to materials and/or craftsmanship.
Bottom Line recommended
from $21.99
View Product -
CARQUEST by Dayco - Poly Rib Belt, Premium (Part No. 5060535)
DescriptionDesigned for high mileage multiple-accessory drives, Dayco's W profile belt (patent pending) is the most innovative advancement in multi-rib belt design in over 25 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile has been specifically Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. The "W" profile cut into the tip of each rib makes the tip more flexible and eliminates belt chirp when the belt enters a worn or misalligned pulley. Constructed with Aramid reinforced EPDM compounds, the Dayco W profile belt delivers more than OE required quality...it delivers the solution to troublesome drive problems. Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications. This Poly-Rib Belt is another Dayco product proudly made in the USA.
Product Features:- The "W" profile rib has been engineered to conform to slight misalignments, the number one cause for belt noise
- Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
- No-Noise Advanced Design EPDM rubber compound for quiet extended life
- Made in the USA
Read 3 review(s)Review snapshot ® by PowerReviews
-
Yes
Yes
Submitted 2020-06-02
By Gary
From Undisclosed
Got fit
Bottom Line NULL
-
Not "Made in USA"
Not "Made in USA"
Submitted 2020-05-23
By John The Fixer
From Clarence NY
I recently purchased this belt online, primarily because it was advertised on this website as a premium belt "Made In USA". I just returned it because the belt I received is labelled "Made In China". I cannot comment on the quality of the belt, but I did not receive what was advertised and it certainly was not what I placed the order for.
Bottom Line not recommended
-
would buy again
would buy again
Submitted 2020-02-18
By Paul
From Undisclosed
great quality perfect fit
Bottom Line NULL
from $20.99
View Product -
Driveworks - Serpentine Belt (Part No. 640K6)
DescriptionThis Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today's automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.
Product Features:- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
- Meets OEM requirements
Read 2 review(s)Review snapshot ® by PowerReviews
-
I'd buy it again.
I'd buy it again.
Submitted 2020-01-30
By David
From Undisclosed
Perfect fit, Was very stiff from being in the package. Microwaved for 30 seconds.
Bottom Line NULL
-
this belt made lots of noise,
this belt made lots of noise,
Submitted 2013-09-22
By mitch
From biloxi ms
I installed this with a new alternator, i could not get it to stop squealing, i replaced the tentioner idler still squealed. I put the old belt back on after about 100 miles, noise went away.
Bottom Line not recommended
from $15.99
View Product -
CARQUEST by Dayco - Poly Rib Belt, Premium (Part No. 5040535)
DescriptionDesigned for high mileage multiple-accessory drives, Dayco's W profile belt (patent pending) is the most innovative advancement in multi-rib belt design in over 25 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile has been specifically Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. The "W" profile cut into the tip of each rib makes the tip more flexible and eliminates belt chirp when the belt enters a worn or misalligned pulley. Constructed with Aramid reinforced EPDM compounds, the Dayco W profile belt delivers more than OE required quality...it delivers the solution to troublesome drive problems. Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications. This Poly-Rib Belt is another Dayco product proudly made in the USA.
Product Features:- The "W" profile rib has been engineered to conform to slight misalignments, the number one cause for belt noise
- Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
- No-Noise Advanced Design EPDM rubber compound for quiet extended life
- Made in the USA
Read 1 review(s)Review snapshot ® by PowerReviews
-
no
no
Submitted 2020-08-18
By Brent
From Undisclosed
Did not match my part
Bottom Line NULL
from $29.99
View Product -
CARQUEST by Dayco - Poly Rib Belt, Premium (Part No. 5061055)
DescriptionDesigned for high mileage multiple-accessory drives, Dayco's W profile belt (patent pending) is the most innovative advancement in multi-rib belt design in over 25 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile has been specifically Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. The "W" profile cut into the tip of each rib makes the tip more flexible and eliminates belt chirp when the belt enters a worn or misalligned pulley. Constructed with Aramid reinforced EPDM compounds, the Dayco W profile belt delivers more than OE required quality...it delivers the solution to troublesome drive problems. Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications. This Poly-Rib Belt is another Dayco product proudly made in the USA.
Product Features:- The "W" profile rib has been engineered to conform to slight misalignments, the number one cause for belt noise
- Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
- No-Noise Advanced Design EPDM rubber compound for quiet extended life
- Made in the USA
Read 1 review(s)Review snapshot ® by PowerReviews
-
Definitely not going to buy this again. It's trash
Definitely not going to buy this again. It's trash
Submitted 2019-04-24
By John
From Nova va
Trash
Bottom Line not recommended
from $28.99
View Product -
Gates - Automotive V-Ribbed Belt (Heavy Duty) (Part No. K060640HD)
DescriptionGates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:- Belt of choice by fleets, including 3/4 and 1 ton pickups
- Lowest cost per mile
- Consistently outperforms all competitors
- Outstanding crack resistance at extreme temperatures
- Problem solver
- Designed for the toughest applications
from $37.49
View Product -
Driveworks - Serpentine Belt (Part No. 1055K6)
DescriptionThis Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today's automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.
Product Features:- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
- Meets OEM requirements
from $27.99
View Product -
Gates - Automotive V-Ribbed Belt (Heavy Duty) (Part No. K060547HD)
DescriptionGates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:- Belt of choice by fleets, including 3/4 and 1 ton pickups
- Lowest cost per mile
- Consistently outperforms all competitors
- Outstanding crack resistance at extreme temperatures
- Problem solver
- Designed for the toughest applications
from $27.49
View Product -
Driveworks - Serpentine Belt (Part No. 550K6)
DescriptionThis Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today's automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.
Product Features:- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
- Meets OEM requirements
from $13.99
View Product -
Driveworks - Serpentine Belt (Part No. 535K6)
DescriptionThis Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today's automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.
Product Features:- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
- Meets OEM requirements
from $11.99
View Product