In-store Pickup
Free Shipping Over $35
Free In-store Services
2014 Chevrolet Malibu Oxygen Sensor
Your 2014 Chevrolet Malibu might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Oxygen Sensor product you desperately need.
We currently carry 14 Oxygen Sensor products to choose from for your 2014 Chevrolet Malibu, and our inventory prices range from as little as $45.99 up to $91.99.
On top of low prices, Advance Auto Parts offers 4 different trusted brands of Oxygen Sensor products for the 2014 Chevrolet Malibu. We only sell parts from trusted brands like Bosch so that you can find quality parts you can count on.
Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 39 reviews on our Oxygen Sensor products for the 2014 Chevrolet Malibu from previous customers.
Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Oxygen Sensor stock in-person!
Oxygen Sensor for Your 2014 Chevrolet Malibu
Search through our amazing selection of Oxygen Sensor products for your 2014 Chevrolet Malibu to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.
-
Bosch - Bosch Oxygen Sensor (Part No. C5010331927BOS)
DescriptionThe Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
- Fine particle filter. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.
Read 3 review(s)Review snapshot ® by PowerReviews
-
Exactly what I needed at a great price
Exactly what I needed at a great price
Submitted 2014-01-06
By 67tripper
From Muskegon, MI
After driving my Trailblazer for about 5 months having a sensor light on and fearing the cost of having to replace the Oxygen Sensor, I found that I not only found a great product with this but the cost wasn't bad either. Since the easy installation has been complete the light has gone off and my truck runs better than ever. Thank you Advance Auto Parts for your help.
Bottom Line recommended
-
good product
good product
Submitted 2011-08-30
By samw
From Grifton, NC
Good product [...]
Bottom Line recommended
-
Happy Woman
Happy Woman
Submitted 2011-08-27
By bluecrawford
From KY
Made the light go off in my dash, what more could a gal ask for 🙂
Bottom Line recommended
from $76.28
View Product -
DENSO - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 21.65 (Part No. 234-4673)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 3 review(s)Review snapshot ® by PowerReviews
-
Yes, I would purchase this product again.
Yes, I would purchase this product again.
Submitted 2020-12-14
By Randy
From Undisclosed
Installation was excellent and the sensor is working great, as expected!
Bottom Line NULL
-
Perfect o.e. replacement
Perfect o.e. replacement
Submitted 2019-06-11
By Terry
From Undisclosed
Fit exactly like the o.e. one. Great quality .
Bottom Line NULL
-
Not the right part
Not the right part
Submitted 2017-07-29
By shadetree
From crestwood, ky
This is probably the upstream for my vehicle. I needed the downstream sensor. I had the wrong connector.
Bottom Line not recommended
from $73.99
View Product -
DENSO - Oxygen Sensor 4 Wire, Universal, Heated, Wire Length: 11.77 (Part No. 234-4212)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Read 1 review(s)Review snapshot ® by PowerReviews
-
Good price. Hard to install for Subaru
Good price. Hard to install for Subaru
Submitted 2013-09-27
By Need _to_fix_my_subaru
From Sterling Heights, MI
Although there were instructions to install on most car manufacturers, there were no wiring conversions for Subaru. This made the install very difficult.
Bottom Line not recommended
from $72.99
View Product -
Bosch - Oxygen Sensor (Part No. 15741)
DescriptionBosch is the world's leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
Read 3 review(s)Review snapshot ® by PowerReviews
-
Not a direct replacement!
Not a direct replacement!
Submitted 2021-05-19
By G A
From Delafield Wisconsin
Easy to install, no tools required? Yeah right. I wasn't informed I would have to wire up and connector and then have to modify my wire harness to install. Not going to use this product.
Bottom Line NULL
-
Sucks
Sucks
Submitted 2021-03-01
By Mike
From Undisclosed
Sucks
Bottom Line NULL
-
I would buy it again
I would buy it again
Submitted 2020-05-26
By RICHARD
From Undisclosed
easy to replace, no more light
Bottom Line NULL
from $52.99
View Product -
GM Genuine Parts - Heated Oxygen Sensor (Part No. 12643707)
DescriptionGM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle's exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Detects oxygen content in the exhaust gases to help optimize emissions
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
from $50.99
View Product -
DENSO - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 15.04 (Part No. 234-4763)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
from $91.99
View Product -
GM Genuine Parts - Heated Oxygen Sensor (Part No. 12661898)
DescriptionGM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle's exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Detects oxygen content in the exhaust gases to help optimize emissions
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
from $45.99
View Product -
GM Genuine Parts - Heated Oxygen Sensor (Part No. 213-4299)
DescriptionGM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle's exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Detects oxygen content in the exhaust gases to help optimize emissions
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
from $84.99
View Product -
NTK - OE Type Oxygen Sensor (Part No. 21071)
DescriptionNTK is The Sensor Specialist for import and domestic applications. Established under the NGK family of products, NTK Oxygen Sensors are part of our ongoing commitment to streamline product types and increase coverage. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic that is used in our oxygen sensors from raw material to finished product. NTK is the world's largest supplier and manufacturer of original equipment oxygen sensors. Combining expertise with innovation, NTK Oxygen Sensors offer superior fit, form and function. NTK Oxygen Sensors are extensively tested during manufacturing to guarantee quality and reliability that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:- NTK is constantly improving sensor designs to provide excellent performance and improve resistance to failure. NTK works with their OEM manufacturers through each phase of development from concept to production.
- NTK oxygen sensors are equipped with OEM specified connectors and attaching hardware for easy installation. Dual-coated platinum element to increase longevity and ensure the quickest response time.
- NTK oxygen sensors heat up rapidly to meet requirements of the vehicle to improve fuel economy and reduce emissions. NTK's proprietary ceramic element overcoat protects against sensor failure.
from $83.99
View Product -
GM Genuine Parts - Heated Oxygen Sensor (Part No. 12656543)
DescriptionGM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle's exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Detects oxygen content in the exhaust gases to help optimize emissions
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
from $55.99
View Product -
Denso - First Time Fit Oxygen Sensor (Part No. C5010302452ND)
DescriptionDenso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
from $81.48
View Product -
Denso - First Time Fit Oxygen Sensor (Part No. C5010690433ND)
DescriptionDenso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
from $89.82
View Product -
Denso - First Time Fit Oxygen Sensor (Part No. C5010466296ND)
DescriptionDenso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:- SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set
from $72.58
View Product -
DENSO - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 16.38 (Part No. 234-4526)
DescriptionDENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
Product Features:- Specifically designed to meet the increasing demands of today's engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
from $67.99
View Product
FAQs for 2014 Chevrolet Malibu Oxygen Sensor Products
What are the most popular Oxygen Sensor for the 2014 Chevrolet Malibu?
With 4 brands you can trust, our most popular Oxygen Sensor products for the 2014 Chevrolet Malibu parts are:What are the 2014 Chevrolet Malibu Oxygen Sensor products with the best customer ratings?
