2011 Land Rover Range Rover Catalytic Converter

Catalytic Converter for Your 2011 Land Rover Range Rover

Search through our amazing selection of Catalytic Converter products for your 2011 Land Rover Range Rover to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.

• 

  MagnaFlow - Universal Catalytic Converter: Fabrication Needed; 2.25 " Inlet /, 2.25 " Outlet, EPA Compliance (Part No. 99205HM)

  Description

  MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

  4.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 5

    5

    2016-09-14

    5

    5

    I would buy this product again

    I would buy this product again

    Submitted 2016-09-14

    By Araña

    From Miami fl

    great product

    Bottom Line recommended

    great product

    By Araña from Miami fl

    BOTTOM LINE recommended

  • 4

    4

    2014-09-03

    4

    4

    Looks Good, Proof will be in the pudding

    Looks Good, Proof will be in the pudding

    Submitted 2014-09-03

    By Tim the T man

    From western PA

    The converter is nicely made, it welded in very well and was a good fit. It cleared my code for down steam 02 sensor. I can't say anything but good about it but need to see how long it lasts for a solid opinion. Magnaflow offers a heavy metal version that has better catalyst that may be a better choice for longevity. I did not know this before I bought and installed mine.

    Bottom Line recommended

    The converter is nicely made, it welded in very well and was a good fit. It cleared my code for down steam 02 sensor. I can't say anything but good about it but need to see how long it lasts for a solid opinion. Magnaflow offers a heavy metal version that has better catalyst that may be a better choice for longevity. I did not know this before I bought and installed mine.

    By Tim the T man from western PA

    BOTTOM LINE recommended

  • 5

    5

    2014-02-13

    5

    5

    Great price great flow

    Great price great flow

    Submitted 2014-02-13

    By Brandon

    From mi

    needs to be cut to fit my application but worked great

    Bottom Line not recommended

    needs to be cut to fit my application but worked great

    By Brandon from mi

    BOTTOM LINE not recommended

  from $221.99

  View Product
• 

  MagnaFlow - Universal Catalytic Converter : Fabrication Needed; 2.25 " Inlet /, 2.25 " Outlet, EPA Compliance (Part No. 51205)

  Description

  MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

  from $241.99

  View Product
• 

  MagnaFlow - Direct Fit Catalytic Converter: No Fabrication Needed, CARB Compliant (Part No. 5551534)

  Description

  Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5551534. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2012 Land Rover Range Rover. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

  from $2416.99

  View Product
• 

  MagnaFlow - Direct Fit Catalytic Converter: No Fabrication Needed, CARB Compliant (Part No. 5551533)

  Description

  Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5551533. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2012 Land Rover Range Rover. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

  from $2415.99

  View Product
• 

  MagnaFlow - Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No. 21-534)

  Description

  Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-534. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2012 Land Rover Range Rover and interchanges with OE part LR043265. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

  from $711.99

  View Product
• 

  MagnaFlow - Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No. 21-533)

  Description

  Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-533. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2012 Land Rover Range Rover and interchanges with OE part LR043262. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

  from $709.99

  View Product