2011 Ford Crown Victoria Ignition Coil

Ignition Coil for Your 2011 Ford Crown Victoria

Search through our amazing selection of Ignition Coil products for your 2011 Ford Crown Victoria to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.

• 

  Motorcraft - Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No. DG-508)

  Description

  The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle's manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
  
  Product Features:

  • These coils provide the exact spark timing that helps maximize the engine and emissions performance
  • RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
  • Engineered to help withstand temperature extremes
  • Internal insulation displacement connection is helps make high-reliability internal connections
  • Interior insulation helps ensure no internal arcing
  • Right fit for each application; helps provide ease of installation and removal
  • High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
  • Housings engineered to help resist cracking in the most extreme conditions
  • Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2021-12-26

    5

    5

    Worked fine

    Worked fine

    Submitted 2021-12-26

    By RSMBBDAD

    From San Antonio, Texas

    Working fine on my Ford F-150. Had one go out at 130,000 miles.

    Bottom Line recommended

    Working fine on my Ford F-150. Had one go out at 130,000 miles.

    By RSMBBDAD from San Antonio, Texas

    BOTTOM LINE recommended

  • 5

    5

    2021-12-15

    5

    5

    New Ignition Coil for Ford V8

    New Ignition Coil for Ford V8

    Submitted 2021-12-15

    By Andrew

    From Greenwood, IN

    Was in stock. Worked perfectly. Only way I'd change this item is to include the coil retaining screw.

    Bottom Line NULL

    Was in stock. Worked perfectly. Only way I'd change this item is to include the coil retaining screw.

    By Andrew from Greenwood, IN

    BOTTOM LINE NULL

  • 5

    5

    2021-09-29

    5

    5

    OEM is the best part to buy

    OEM is the best part to buy

    Submitted 2021-09-29

    By carol

    From Undisclosed

    Bought for my F150 great price and oem product . When you buy oem it's a one and done part those aftermarket parts are hit or miss and dont last long so you're replacing it twice

    Bottom Line NULL

    Bought for my F150 great price and oem product . When you buy oem it's a one and done part those aftermarket parts are hit or miss and dont last long so you're replacing it twice

    By carol from Undisclosed

    BOTTOM LINE NULL

  from $79.99

  View Product
• 

  PerTronix - Flame Thrower Coil On Plug: 1998-2009, Ford 2 Valve, 15% More Spark Energy, 1 ea, OE Replacement (Part No. 30721)

  Description

  Flame-Thrower COP for 2 valve Ford engines feature an optimized coil design which increases the spark energy by 15% over the OEM coils. Molded epoxy prevents premature failure from moisture or winding fatigue. OEM replacement.
  
  Product Features:

  • 30,000 Volts. Direct OEM replacement.
  • Optimized coil design yields at least 15% more energy available for the spark than the most common OEM coils.
  • Provides the spark energy throughout the RPM range and with no energy degradation up to 11,000 engine RPMs. Plated Copper terminals for added current conduction.
  • Moisture resistant construction ensures long life in harsh environments. High-temp boot sustains seal and form. Epoxy molded for shock and vibration resistance.

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2021-10-18

    5

    5

    Yey

    Yey

    Submitted 2021-10-18

    By Lance

    From Undisclosed

    Very good

    Bottom Line NULL

    Very good

    By Lance from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2021-08-24

    5

    5

    Engine running smooth again

    Engine running smooth again

    Submitted 2021-08-24

    By scott

    From Undisclosed

    Ford 5.4 liter exact fit and replaced my factory units. Save time and remember to put dielectric grease on the first time.

    Bottom Line NULL

    Ford 5.4 liter exact fit and replaced my factory units. Save time and remember to put dielectric grease on the first time.

    By scott from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2021-04-09

    5

    5

    Good product

    Good product

    Submitted 2021-04-09

    By Tommy

    From Undisclosed

    Works great

    Bottom Line NULL

    Works great

    By Tommy from Undisclosed

    BOTTOM LINE NULL

  from $31.99

  View Product
• 

  PerTronix - Flame Thrower Coil On Plug: 1998-2009, Ford 2 Valve, 15% More Spark Energy, 8 ea, OE Replacement (Part No. 30728)

  Description

  Flame-Thrower COP for 2 valve Ford engines feature an optimized coil design which increases the spark energy by 15% over the OEM coils. Molded epoxy prevents premature failure from moisture or winding fatigue. OEM replacement.
  
  Product Features:

  • 30,000 Volts. Direct OEM replacement.
  • Optimized coil design yields at least 15% more energy available for the spark than the most common OEM coils.
  • Provides the spark energy throughout the RPM range and with no energy degradation up to 11,000 engine RPMs. Plated Copper terminals for added current conduction.
  • Moisture resistant construction ensures long life in harsh environments. High-temp boot sustains seal and form. Epoxy molded for shock and vibration resistance.

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 1

    1

    2023-02-11

    1

    1

    Didn't last long

    Didn't last long

    Submitted 2023-02-11

    By Steve

    From Mass

    I replaced all 8 coils on my F150 with these in Nov 2021. In Dec 2022 they started failing. I've replaced half of them in the past two months. I'm going to take the remaining four out now and throw them away rather than keep replacing one every couple weeks.

    Bottom Line not recommended

    I replaced all 8 coils on my F150 with these in Nov 2021. In Dec 2022 they started failing. I've replaced half of them in the past two months. I'm going to take the remaining four out now and throw them away rather than keep replacing one every couple weeks.

    By Steve from Mass

    BOTTOM LINE not recommended

  • 4

    4

    2022-02-28

    4

    4

    These worked but I had a little trouble

    These worked but I had a little trouble

    Submitted 2022-02-28

    By Toolbag

    From Central Illinois

    Having checked the reviews on multiple websites, I decided to test fit my coils and plugs ahead of time. I am glad I did. I found that some of the coil wires were not quite to specifications. Some of the coils at the spark plug end were almost too big to fit the cap on the spark plugs. I mixed and matched until I got them all fitted as best I could. Now I will wait and see how well they work in the long run.

    Bottom Line recommended

    Having checked the reviews on multiple websites, I decided to test fit my coils and plugs ahead of time. I am glad I did. I found that some of the coil wires were not quite to specifications. Some of the coils at the spark plug end were almost too big to fit the cap on the spark plugs. I mixed and matched until I got them all fitted as best I could. Now I will wait and see how well they work in the long run.

    By Toolbag from Central Illinois

    BOTTOM LINE recommended

  • 5

    5

    2022-01-08

    5

    5

    On my second set after 65,000 miles

    On my second set after 65,000 miles

    Submitted 2022-01-08

    By Keys man

    From Key largo fl

    They are great coil even when failing they still get the job done

    Bottom Line recommended

    They are great coil even when failing they still get the job done

    By Keys man from Key largo fl

    BOTTOM LINE recommended

  from $196.99

  View Product
• 

  Carquest - Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No. 26C1001)

  Description

  Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle's ignition system performance.
  
  Product Features:

  • Computer-Aided Design (CAD), laser scanning and 3D printing - utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) - in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.

  from $47.99

  View Product
• 

  Carquest Premium - Ignition Coil (Part No. EBC1342)

  Description

  Carquest Premium engine management products provide the right ignition coils for a wide range of domestic and import applications. They deliver the highest performance and durability under demanding conditions. Designed to meet OE quality and performance standards using top-quality components, our ignition coils are the best choice for your maintenance and repair needs.
  
  Product Features:

  • Coils are designed and engineered to be an OE quality replacement for fit and performance
  • High-strength dielectric epoxy and 100% copper windings used to deliver high-temperature performance and vibration resistance
  • High-efficiency laminations produce a high-energy spark and reliable performance
  • Factories use ISO 9001 and IATF 16949 standards to deliver products designed to meet or exceed OE voltage output specifications
  • Top-quality components and materials used to deliver maximum performance and long service life under tough operating conditions

  from $59.99

  View Product
• 

  NGK - Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No. 48688)

  Description

  NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year's experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK's coil designs will outperform all others - far beyond operational environments a vehicle would actually experience
  
  Product Features:

  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

  from $72.99

  View Product
• 

  DENSO - Original Equipment Quality Direct Ignition Coil (Part No. 673-6000)

  Description

  As the innovator and leader in stick coil technology, DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don't be fooled by imitations - look for the DENSO name to be sure you're getting the best.
  
  Product Features:

  • First Time Fit
  • Built to DENSO Original Equipment Standards

  from $71.99

  View Product
• 

  Delphi - Ignition Coil: Meets or Exceeds Original Equipment Design, 1 Piece (Part No. GN10164)

  Description

  Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.
  
  Product Features:

  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to insert power into spark plugs to ensure fast starts, consistent engine performance and optimized fuel efficiency
  • Delphi uses smart winding process techniques to controls wire lengths, keeping voltage the same
  • We manufacture our ignition coils with a high quality wire coating that resists imperfections that lead to failure

  from $80.99

  View Product