2011 Audi S4 Valve Cover and Cylinder Heads
More 2011 Audi S4 Valve Cover and Cylinder Heads
Find your specific 2011 Audi S4 original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2011 Audi S4 Valve Cover and Cylinder Heads
MAHLE Original – Cylinder Head Bolts (Part No.GS33453)
from
$67.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- Cylinder head bolt set (GS) contains the head bolts necessary to replace one cylinder head. Torque-to-yield bolts cannot be reused, new fasteners ensure proper sealing load when used with new MAHLE Original head gaskets.
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Ajusa – Cylinder Head Bolt Set (Part No.81052000)
from
$47.49
AJUSA is a leading global manufacturer of automotive gaskets, head bolt sets, seals and hydraulic lifters for European and Asian vehicles. AJUSA prides itself in offering the latest applications with quality that is equal to or exceeds that of the OE. Headquartered in Spain, AJUSA was established in 1972 as a gasket manufacturer, is an OE supplier, is ISO 9001 and ISO/TS 16949 certified, and ISO 14001 certified as a company that protects and respects the environment.
Product Features:
See More
Product Features:
- AJUSA cylinder head bolts meet or exceed OE manufacturer specifications and are a perfect complement to AJUSA head sets and AJUSA head gaskets.
- All kits are application specific.
- Each set contains all the head bolts needed to complete the repair. V & H engines require 2 sets for a repair.
- Each set comes with special assembly lube to ensure proper torque when tightening.
- All kits are boxed and shrink wrapped.
Victor Reinz – Engine Cylinder Head Bolt Set (Part No.14-32125-02)
from
$23.49
Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Head bolt replacement recommended.
- Torque-to-yield bolts are designed so that they can be elongated beyond their elastic limit into the plastic region without problems.
Ajusa – Cylinder Head Bolt Set (Part No.81048700)
from
$38.99
AJUSA is a leading global manufacturer of automotive gaskets, head bolt sets, seals and hydraulic lifters for European and Asian vehicles. AJUSA prides itself in offering the latest applications with quality that is equal to or exceeds that of the OE. Headquartered in Spain, AJUSA was established in 1972 as a gasket manufacturer, is an OE supplier, is ISO 9001 and ISO/TS 16949 certified, and ISO 14001 certified as a company that protects and respects the environment.
Product Features:
See More
Product Features:
- AJUSA cylinder head bolts meet or exceed OE manufacturer specifications and are a perfect complement to AJUSA head sets and AJUSA head gaskets.
- All kits are application specific.
- Each set contains all the head bolts needed to complete the repair. V & H engines require 2 sets for a repair.
- Each set comes with special assembly lube to ensure proper torque when tightening.
- All kits are boxed and shrink wrapped.
Victor Reinz – Engine Cylinder Head Bolt Set (Part No.14-32198-01)
from
$22.29
Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Head bolt replacement recommended.
- Torque-to-yield bolts are designed so that they can be elongated beyond their elastic limit into the plastic region without problems.
Ajusa – Cylinder Head Bolt Set (Part No.81051700)
from
$44.99
AJUSA is a leading global manufacturer of automotive gaskets, head bolt sets, seals and hydraulic lifters for European and Asian vehicles. AJUSA prides itself in offering the latest applications with quality that is equal to or exceeds that of the OE. Headquartered in Spain, AJUSA was established in 1972 as a gasket manufacturer, is an OE supplier, is ISO 9001 and ISO/TS 16949 certified, and ISO 14001 certified as a company that protects and respects the environment.
Product Features:
See More
Product Features:
- AJUSA cylinder head bolts meet or exceed OE manufacturer specifications and are a perfect complement to AJUSA head sets and AJUSA head gaskets.
- All kits are application specific.
- Each set contains all the head bolts needed to complete the repair. V & H engines require 2 sets for a repair.
- Each set comes with special assembly lube to ensure proper torque when tightening.
- All kits are boxed and shrink wrapped.
TRW – Valve Keeper (Part No.A4070774061TRW)
from
$3.14
Valve Keeper
INA – Rocker Arm (Part No.A4040420929INA)
from
$15.23
Rocker Arm
CRP – Exhaust Valve (Part No.A4050127479CRP)
from
$36.75
Exhaust Valve
Sealed Power – Engine Exhaust Valve (Part No.V-4615X)
from
$15.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
TRW – TRW Exhaust Valve (Part No.A4050169647TRW)
from
$60.84
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.
Product Features:
See More
Product Features:
- OE Quality
- Optimized for strength
- Heat and corrosion resistant
- Chromium plated or nitrided
- Stem optimized to resist wear
CRP – Intake Valve (Part No.A4060134876CRP)
from
$38.11
Intake Valve
Sealed Power – Engine Intake Valve (Part No.V-4614)
from
$6.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
AE – Federal Mogul Intake Valve (Part No.A406012822AE)
from
$13.78
The AE range of high quality valve-train components includes application-specific valves, design and manufactured to OE standards. The top-engine environment is increasingly hostile, due to turbocharging and other techniques for CO2 reduction. Only components that employ OE design expertise, with the latest advanced materials and manufacturing quality, can provide the performance and durability that professional engine technicians demand. Valves are subjected to some of the highest stresses and temperatures in the engine, yet not only must they survive, they must also continue to seal perfectly. As a top-engine expert with a long heritage of innovation, AE provides the answer with high-precision designs. The choice of material is so critical that some AE valves, known as bi-metallic valves, are made from two materials, with the head optimized for strength and temperature resistance and the stem optimized to resist wear.
Product Features:
See More
Product Features:
- OE Quality
- Optimized for strength
- High temperature strength
- Stem optimized to resist wear
TRW – TRW Intake Valve (Part No.A4060377759TRW)
from
$24.91
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.
Product Features:
See More
Product Features:
- OE Quality
- Optimized for strength
- Heat and corrosion resistant
- Chromium plated or nitrided
- Stem optimized to resist wear
AE – Federal Mogul Intake Valve (Part No.A406061777AE)
from
$17.34
The AE range of high quality valve-train components includes application-specific valves, design and manufactured to OE standards. The top-engine environment is increasingly hostile, due to turbocharging and other techniques for CO2 reduction. Only components that employ OE design expertise, with the latest advanced materials and manufacturing quality, can provide the performance and durability that professional engine technicians demand. Valves are subjected to some of the highest stresses and temperatures in the engine, yet not only must they survive, they must also continue to seal perfectly. As a top-engine expert with a long heritage of innovation, AE provides the answer with high-precision designs. The choice of material is so critical that some AE valves, known as bi-metallic valves, are made from two materials, with the head optimized for strength and temperature resistance and the stem optimized to resist wear.
Product Features:
See More
Product Features:
- OE Quality
- Optimized for strength
- High temperature strength
- Stem optimized to resist wear
Popular 2011 Audi S4 Valve Cover and Cylinder Heads Categories
2011 Audi S4 Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 2011 Audi S4. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 7 different Valve Cover and Cylinder Heads in our inventory ranging from $3.14 to $82.93. That means you can find the exact parts or products you need to keep that 2011 Audi S4 running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 2011 Audi S4. TRW, Victor Reinz, and Ajusa are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 2011 Audi S4, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 2011 Audi S4 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 2011 Audi S4 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2011 Audi S4 demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your S4 the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
FAQs for 2011 Audi S4 Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 2011 Audi S4?
Out of 7 Valve Cover and Cylinder Heads for the 2011 Audi S4, the most popular in our inventory are:
