In-store Pickup
Free Shipping Over $35
Free In-store Services
2010 GMC Savana 2500 Rear Brake Rotors
Your 2010 GMC Savana 2500 might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Rear Brake Rotors product you desperately need.
We currently carry 14 Rear Brake Rotors products to choose from for your 2010 GMC Savana 2500, and our inventory prices range from as little as $83.99 up to $137.99.
On top of low prices, Advance Auto Parts offers 4 different trusted brands of Rear Brake Rotors products for the 2010 GMC Savana 2500. We only sell parts from trusted brands like Carquest so that you can find quality parts you can count on.
Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 592 reviews on our Rear Brake Rotors products for the 2010 GMC Savana 2500 from previous customers.
Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Rear Brake Rotors stock in-person!
Rear Brake Rotors for Your 2010 GMC Savana 2500
Search through our amazing selection of Rear Brake Rotors products for your 2010 GMC Savana 2500 to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.
-
CARQUEST Platinum Painted - Brake Rotor - Rear (Part No. YH145260P)
DescriptionCARQUEST Platinum Painted Rotors feature Rotor Shield, a rust inhibiting barrier that provides up to 5X more protection than non-painted rotors. CARQUEST Platinum Painted Rotors meet or exceed original equipment design delivering superior stopping power with proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Platinum Painted Rotors are designed to dissipate heat, helping to eliminate brake fade and increase the life of your pads. Painted and ready to install out of the box (after cleaning)
Product Features:- Engineered to withstand 120 hours of salt spray testing
- Painted and ready to install out of the box after cleaning
- Meets or exceeds OE design for superior stopping power
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break in time.
Read 3 review(s)Review snapshot ® by PowerReviews
-
yes
yes
Submitted 2021-10-16
By Sonia
From Undisclosed
so far so good
Bottom Line NULL
-
Yes
Yes
Submitted 2021-04-16
By Greg
From Undisclosed
CNBC Cb bhj
Bottom Line NULL
-
Perfect part for the job
Perfect part for the job
Submitted 2021-04-10
By Alex
From Undisclosed
Works just like it should
Bottom Line NULL
from $92.99
View Product -
Carquest Wearever - Coated Rotor-Rear (Part No. YH145260C)
DescriptionCARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time.
Product Features:- Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- OE configuration to dissipate heat, increasing pad life
- Proper harmonic design helps to reduce brake noise
- Environmentally friendly hexavalent chromium (Cr6+) free anti-corrosion coating
- Install the disc right out of box, no cleaning necessary
- Provide a long lasting clean appearance behind today's open rims
Read 3 review(s)Review snapshot ® by PowerReviews
-
Nice product
Nice product
Submitted 2021-04-25
By FREDDY
From Undisclosed
My go to rotor for heavyduty applications
Bottom Line NULL
-
The coated rotors look great behind my SS Silverado wheels
The coated rotors look great behind my SS Silverado wheels
Submitted 2020-07-21
By Mike
From Undisclosed
The rotors look and work great on my Silverado
Bottom Line NULL
-
Coated are great
Coated are great
Submitted 2018-05-15
By Nicholas
From undisclosed
Go with coated you'll love em They last too
Bottom Line NULL
from $102.99
View Product -
Carquest Wearever - Coated Rotor-Rear (Part No. YH145262C)
DescriptionCARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time.
Product Features:- Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- OE configuration to dissipate heat, increasing pad life
- Proper harmonic design helps to reduce brake noise
- Environmentally friendly hexavalent chromium (Cr6+) free anti-corrosion coating
- Install the disc right out of box, no cleaning necessary
- Provide a long lasting clean appearance behind today's open rims
Read 1 review(s)Review snapshot ® by PowerReviews
-
Yes
Yes
Submitted 2021-02-02
By Randy
From Undisclosed
Worked great
Bottom Line NULL
from $99.99
View Product -
CARQUEST Platinum Painted - Brake Rotor - Rear (Part No. YH145262P)
DescriptionCARQUEST Platinum Painted Rotors feature Rotor Shield, a rust inhibiting barrier that provides up to 5X more protection than non-painted rotors. CARQUEST Platinum Painted Rotors meet or exceed original equipment design delivering superior stopping power with proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Platinum Painted Rotors are designed to dissipate heat, helping to eliminate brake fade and increase the life of your pads. Painted and ready to install out of the box (after cleaning)
Product Features:- Engineered to withstand 120 hours of salt spray testing
- Painted and ready to install out of the box after cleaning
- Meets or exceeds OE design for superior stopping power
- Air gap eliminates brake fade and increases pad life
- Non-directional finish decreases break in time.
Read 3 review(s)Review snapshot ® by PowerReviews
-
I would buy again
I would buy again
Submitted 2021-05-20
By Krister
From Undisclosed
Great product and great price!
Bottom Line NULL
-
Good rotors
Good rotors
Submitted 2021-05-08
By Jeffrey
From Undisclosed
New rear rotors came painted gray. I felt like painting over it black
Bottom Line NULL
-
good part
good part
Submitted 2021-04-04
By Ronald
From Undisclosed
no problems but i would like a better warenty
Bottom Line NULL
from $89.99
View Product -
Carquest Wearever - Brake Rotor - Rear (Part No. YH145262)
DescriptionCARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time.
Product Features:- Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- OE configuration to dissipate heat, increasing pad life
- Proper harmonic design helps to reduce brake noise
- Non-directional finish for less break-in time and reduced brake noise
- Ready for immediate "out-of-the-box" installation (after cleaning)
Read 3 review(s)Review snapshot ® by PowerReviews
-
Measure inside hole of rotor
Measure inside hole of rotor
Submitted 2021-07-11
By Angellina
From Undisclosed
Make sure to measure the inside diameter of the rotor to get the right one
Bottom Line NULL
-
Buy again
Buy again
Submitted 2018-11-15
By Marty
From Undisclosed
Quite and no brake dust. Great deal when you buy online with discount code.
Bottom Line NULL
-
Purchased online picked up next day and saved 20'/'
Purchased online picked up next day and saved 20'/'
Submitted 2017-11-12
By t
From undisclosed
Installed on my hd 2500 works fine
Bottom Line NULL
from $83.99
View Product -
Carquest Wearever - Brake Rotor - Rear (Part No. YH145260)
DescriptionCARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time.
Product Features:- Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- OE configuration to dissipate heat, increasing pad life
- Proper harmonic design helps to reduce brake noise
- Non-directional finish for less break-in time and reduced brake noise
- Ready for immediate "out-of-the-box" installation (after cleaning)
Read 3 review(s)Review snapshot ® by PowerReviews
-
Dependable
Dependable
Submitted 2019-07-29
By Robert
From Undisclosed
Great quality, no warp.
Bottom Line NULL
-
I would buy this part again
I would buy this part again
Submitted 2017-10-15
By james
From undisclosed
Good part
Bottom Line NULL
-
works great!
works great!
Submitted 2017-07-19
By matt
From undisclosed
works great!
Bottom Line NULL
from $87.99
View Product -
Carquest Frontline - Brake Rotor - Rear (Part No. G12478SD)
DescriptionCARQUEST Frontline Rotors are manufactured to withstand severe duty abuse, extending the limits of braking punishment. Machined and balanced, Frontline severe duty castings meet or exceed original equipment design delivering better stopping power, superior heat dissipation, and high tensile strength. CARQUEST Frontline Rotors are coated to protect against corrosion and rust build-up which can shorten rotor life. Ready to install out of the box to save you time.
Product Features:- Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
- Exceeds ISO manufacturing guidelines (International Organization for Standardization)
- OE vane configuration to dissipate heat, increasing pad life
- Proper harmonic design helps to reduce brake noise
- Coating promotes unrestricted heat venting by restricting rust and corrosion build-up
- Ready for immediate "out-of-the-box" installation, no need to clean
- Advance Auto Parts Rotor Tips: Recommend always use a torque wrench to tighten wheel bolts to the manufacturers' specifications to prevent pedal pulsation
- Always replace rotors in pairs to improve stopping power
- Burnish the pads to the rotor by applying the 30/30/30 rule: 30 stops from 30 mph with 30 seconds of cool down between stops
Read 2 review(s)Review snapshot ® by PowerReviews
-
Awesome product
Awesome product
Submitted 2017-06-02
By Jamie
From undisclosed
Very nice, works great
Bottom Line NULL
-
Definitely non "exact fit"
Definitely non "exact fit"
Submitted 2016-10-10
By Mark
From Ohio
This is definitely not an "exact fit" part for a 2003 Suburban 2500. The hub hole his too big.
Bottom Line not recommended
from $107.99
View Product -
GM Genuine Parts - Rear Disc Brake Rotor (Part No. 177-861)
DescriptionGM Genuine Parts Disc Brake Rotors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Disc brake rotors are mounted to the wheel hub where the calipers press your vehicle's brake pads against the disc surface to help slow down the vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:- Most GM OE brake rotors sold in the U.S are Ferritic Nitro-Carburized, or FNC rotor
- These rotors typically last two times longer, compared to non-FNC rotors, due to improved pad wear behavior
- OE brake components are specifically designed to work with your GM vehicle safety systems
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
from $137.99
View Product -
GM Genuine Parts - Rear Disc Brake Rotor (Part No. 177-860)
DescriptionGM Genuine Parts Disc Brake Rotors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Disc brake rotors are mounted to the wheel hub where the calipers press your vehicle's brake pads against the disc surface to help slow down the vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:- Most GM OE brake rotors sold in the U.S are Ferritic Nitro-Carburized, or FNC rotor
- These rotors typically last two times longer, compared to non-FNC rotors, due to improved pad wear behavior
- OE brake components are specifically designed to work with your GM vehicle safety systems
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
from $137.99
View Product -
ACDelco - Professional DuraStop Coated Brake Disc (Rotor) (Part No. N1000577626ACD)
DescriptionACDelco Professional DuraStop Brakes are the most thoroughly, independently tested brakes on the aftermarket and are designed to help resist corrosion and premature wear. ACDelco submits its brake products through a range of test methods, including D3EA®, along with Noise/Vibration/Harshness (NVH) and durability/wear testing. This allows us to deliver the high-quality product that an ACDelco customer expects. No manufacturer tests or audits its replacement brake products to the level of ACDelco. Dual Dynamometer Differential Effectiveness Analysis (D3EA®) and SAE J2784.
Product Features:- No machining required - ready to be installed right out of the box
- Rust-preventative coating
- Mill-balanced for proper rotor function
- Quality validated for proper metallurgy and correct brake plate thickness
- Non-directional brake surface finish for consistent braking
- Chamfer angle follows the OE design
- (D3EA®) and SAE J2784 testes and approved
- Noise/Vibration/Harshness (NVH) and durability/wear tested
from $133.64
View Product -
ACDelco - GM Original Equipment Coated Brake Disc (Rotor) (Part No. N1000124877ACD)
DescriptionACDelco GM Original Equipment Disc Brake Rotors are metal discs mounted to the wheel hub where the caliper can press the brake pads against the disc surfaces to slow the vehicle, and are GM-recommended replacements for your vehicle's original components. These disc brake rotors are manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:- Inspected for balance, resulting in smooth brake operation and noise reduction
- Rust-preventive coating to help protect against corrosion
- GM-recommended replacement part for your GM vehicle's original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
from $122.54
View Product -
ACDelco - GM Original Equipment Coated Brake Disc (Rotor) (Part No. N1000124875ACD)
DescriptionACDelco GM Original Equipment Disc Brake Rotors are metal discs mounted to the wheel hub where the caliper can press the brake pads against the disc surfaces to slow the vehicle, and are GM-recommended replacements for your vehicle's original components. These disc brake rotors are manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:- Inspected for balance, resulting in smooth brake operation and noise reduction
- Rust-preventive coating to help protect against corrosion
- GM-recommended replacement part for your GM vehicle's original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
from $112.98
View Product -
WBR Coated - Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No. N1000124875WBC)
DescriptionWBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.
Product Features:- High metallurgical and machining standard to improve stopping distances
- Produced to match OE design fitment - G 3000 gray iron
- Mill balanced
- TS16949 certified
- Non-directional finish provides smooth vibration free performance
- No need for machining prior to installation
- Durable Metallurgic-Gray finish to all outward non-friction surfaces
- Metallurgic-Gray anti-rust protection to help maintain a clean appearance
- Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
- Designed to minimize brake fade and extend pad and rotor life
from $93.99
View Product -
WBR Coated - Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No. N1000124877WBC)
DescriptionWBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.
Product Features:- High metallurgical and machining standard to improve stopping distances
- Produced to match OE design fitment - G 3000 gray iron
- Mill balanced
- TS16949 certified
- Non-directional finish provides smooth vibration free performance
- No need for machining prior to installation
- Durable Metallurgic-Gray finish to all outward non-friction surfaces
- Metallurgic-Gray anti-rust protection to help maintain a clean appearance
- Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
- Designed to minimize brake fade and extend pad and rotor life
from $98.07
View Product
FAQs for 2010 GMC Savana 2500 Rear Brake Rotors Products
What are the most popular Rear Brake Rotors products for the 2010 GMC Savana 2500?
Our most popular Rear Brake Rotors products for the 2010 GMC Savana 2500 are:What are the top user-rated Rear Brake Rotors products for the 2010 GMC Savana 2500?
