In-store Pickup
Free Shipping Over $25
Free In-store Services
2010 Chevrolet Impala Rack and Pinion
2010 Chevrolet Impala Rack and Pinion
Your 2010 Chevrolet Impala might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Rack and Pinion product you desperately need.
We currently carry 9 Rack and Pinion products to choose from for your 2010 Chevrolet Impala, and our inventory prices range from as little as $197.99 up to $697.99.
On top of low prices, Advance Auto Parts offers 2 different trusted brands of Rack and Pinion products for the 2010 Chevrolet Impala. We only sell parts from trusted brands like Cardone so that you can find quality parts you can count on.
Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 264 reviews on our Rack and Pinion products for the 2010 Chevrolet Impala from previous customers.
Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Rack and Pinion stock in-person!
Rack and Pinion for Your 2010 Chevrolet Impala
Search through our amazing selection of Rack and Pinion products for your 2010 Chevrolet Impala to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.
-
ACDelco - Professional Steering Rack, Remanufactured (Part No. M1000577389ACD)
DescriptionACDelco steering racks are remanufactured using 100% new, premium-grade seals and new bellows, boots and mounting bushings to help provide better durability and reliability. Proprietary sleeves are bonded and staked in place, locking it for safety. Shafts meet rigid surface finish and straightness tolerances. 100% new, premium-quality boots and premium stainless steel boot clamps for precise fit and leak-free sealing; the stainless steel helps provide no-rust, no-gap, full-radius sealing.
Product Features:- 100% new OE quality seals and teflon o-rings
- Proprietary micro-finish sleeving of valve housing
- Shafts are centerless polished to OE specifications
- Latest technology, including GM's Magnasteer
- Every shaft is centerless polished
- Shafts are checked for straightness to .005 TIR
- Every valve is power flushed
- New O.E. Saginaw Teflon Rings
Read 1 review(s)Review snapshot ® by PowerReviews
-
Yea
Yea
Submitted 2019-11-30
By Dash5214
From Portage In
No leaks or problems so far. Nice tight unit. Bought this unit after having problems with the cardone unit. You are better off going AC DELCO. Unfortunately it only has 1 year on it. However, I believe it's better quality!
Bottom Line recommended
from $288.71
View Product -
Cardone - Hydraulic Power Rack and Pinion {Complete} - Domestic (Part No. 22-1003)
DescriptionA1 CARDONE Remanufactured Rack and Pinion units are built to meet or exceed OEM performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested using state of the art testing equipment, to ensure proper function, providing a reliable, long-lasting, product both you and your vehicle can rely on.
Product Features:- Protective coating applied to each unit, where applicable, to extend the life of the unit
- 100% performance testing to ensure perfect fit, function and reliable performance
- 100% computerized hydraulic testing, where applicable, for proper flow, leakage and performance ensures perfect fit and function
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life
- 100% new O.E.M. style O-rings and lip seals ensure no leaking and long-lasting performance, where applicable
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance, where applicable
- Manual rack and pinions are supplied with premium-quality bearings help to deliver a smoother steering experience
- Valve housings, where applicable, have polished micro-finish sleevings for durability
- Built to meet or exceed O.E.M. performance
Read 3 review(s)Review snapshot ® by PowerReviews
-
Yes
Yes
Submitted 2020-10-02
By Milous
From Undisclosed
Great
Bottom Line NULL
-
I would have to think twice before buying something like thi
I would have to think twice before buying something like thi
Submitted 2020-09-10
By Joey
From Undisclosed
The product was defective had to pay twice for labor
Bottom Line NULL
-
Great product
Great product
Submitted 2020-02-25
By Dustin
From Undisclosed
Worked great!!!
Bottom Line NULL
from $229.99
View Product -
Cardone - Hydraulic Power Rack and Pinion {Complete} - Domestic (Part No. 22-1012)
DescriptionA1 CARDONE Remanufactured Rack and Pinion units are built to meet or exceed OEM performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested using state of the art testing equipment, to ensure proper function, providing a reliable, long-lasting, product both you and your vehicle can rely on.
Product Features:- Protective coating applied to each unit, where applicable, to extend the life of the unit
- 100% performance testing to ensure perfect fit, function and reliable performance
- 100% computerized hydraulic testing, where applicable, for proper flow, leakage and performance ensures perfect fit and function
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life
- 100% new O.E.M. style O-rings and lip seals ensure no leaking and long-lasting performance, where applicable
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance, where applicable
- Manual rack and pinions are supplied with premium-quality bearings help to deliver a smoother steering experience
- Valve housings, where applicable, have polished micro-finish sleevings for durability
- Built to meet or exceed O.E.M. performance
Read 3 review(s)Review snapshot ® by PowerReviews
-
Junk
Junk
Submitted 2020-05-31
By Bill
From Howell nj
These are junk. I tried to save some money but it cost me more in the end. I have had two of these in a row leaking. I'm ordering a ac delco one now. Third time having to get the car aligned. Do not buy these.
Bottom Line not recommended
-
Returned due to part not needed
Returned due to part not needed
Submitted 2019-11-24
By Lisa
From Undisclosed
Product was returned due to purchase of incorrect part ordered. Gave 5 stars for ease of online ordering and pick up.
Bottom Line NULL
-
I will not buy this part any more
I will not buy this part any more
Submitted 2019-11-22
By Lash
From Undisclosed
Part is trash and stop working 2 days after install
Bottom Line NULL
from $197.99
View Product -
PWR - New Hydraulic Power Rack and Pinion (Part No. 42-1410)
DescriptionPWR New Rack & Pinions are engineered and manufactured for superior performance and reliability. All racks have precision manufacturing controlled internal components. PWR Rack & Pinions enhance installation efficiency, address premature product-based failures, and increase lasting customer satisfaction.
Product Features:- All PWR units are 100% NEW
- Factory Installed Rack Integrated Mounting Bushings
- Best-In-Class Industrial Grade Packaging
- PWR Engineering Approved Tie Rod, Boot, and Boot Seal Designs
- Precision Routed and Constructed Fluid Transfer Tubes
- Manufactured to meet or exceed OE requirements
- Engineering, test, and quality validation in the USA
from $697.99
View Product -
PWR - New Hydraulic Power Rack and Pinion (Part No. 42-2071)
DescriptionPWR New Rack & Pinions are engineered and manufactured for superior performance and reliability. All racks have precision manufacturing controlled internal components. PWR Rack & Pinions enhance installation efficiency, address premature product-based failures, and increase lasting customer satisfaction.
Product Features:- All PWR units are 100% NEW
- Factory Installed Rack Integrated Mounting Bushings
- Best-In-Class Industrial Grade Packaging
- PWR Engineering Approved Tie Rod, Boot, and Boot Seal Designs
- Precision Routed and Constructed Fluid Transfer Tubes
- Manufactured to meet or exceed OE requirements
- Engineering, test, and quality validation in the USA
from $638.99
View Product -
ACDelco - Hydraulic Rack and Pinion Steering Gear Assembly with Inner Tie Rods (Part No. 19330429)
DescriptionACDelco GM Original Equipment Remanufactured Rack and Pinion Assemblies convert the rotation of your vehicle's steering column to the side-to-side motion needed to steer its front or rear wheels, and are GM-recommended replacements for your vehicle's original components. Remanufacturing rack and pinion assemblies is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing helps return components back into service rather than processing as scrap or simply disposing of them. These rack and pinion assemblies will provide the same performance, durability, and service life you expect from ACDelco.
Product Features:- Converts steering column rotation into side-to-side motion needed to steer wheels
from $589.99
View Product -
ACDelco - GM Original Equipment Steering Rack, Remanufactured (Part No. M1000577387ACD)
DescriptionThe ACDelco GM Original Equipment Remanufactured Rack and Pinion Assembly converts the rotation of the steering column to the side-to-side motion needed to steer the vehicle's front or rear wheels. They are a GM-recommended replacement for your vehicle's original components. Remanufacturing rack and pinion assemblies is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. This original equipment rack and pinion assembly is manufactured to fit your specific GM vehicle and will provide the same performance, durability, and service life you expect from ACDelco.
Product Features:- GM-recommended replacement part for your GM vehicle's original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
from $570.84
View Product -
Cardone New - Hydraulic Power Rack and Pinion Complete Unit (Part No. 97-1003)
DescriptionCARDONE Engineered Technology ensures that all CARDONE New Rack and Pinion units meet or exceed O.E.M. performance. CSE Technology is based on over 40 years of reverse-engineering expertise, where original design weaknesses are identified and improved, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are 100% tested to ensure reliable, long-lasting performance.
Product Features:- Environmentally-friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust
- 100% performance testing to ensure perfect fit, function and reliable performance
- Computerized spool valve balancing ensures exceptional steering feel
- Supplied with O.E.M. grade seals, O-rings and boots to provide optimal sealing performance and longevity
- Built to meet or exceed O.E.M. performance
from $368.99
View Product -
Cardone - Steering Rack (Part No. M1000898436CAR)
from $282.08
View Product