2009 Toyota Tacoma Exhaust System Kits

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 40-9016 2.5″ Stainless Steel Exhaust System 05-12 Tacoma Access/Double Cab & Long Bed
• Large diameter stainless steel mandrel-bent tube

DynoMax® Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler

Product Features:

• Stainless steel construction for lifelong protection
• 100% welded design for maximum durability
• Straight through design ensures unrestricted exhaust flow and reduces back pressure
• CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
• Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

This Rebel Series cat-back is designed with dual polished exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 3″ dual MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. In testing, the cat-back exhaust system resulted in gains up to + 9 horsepower and + 16 lbs. x ft. of torque, as measured on our in-house dyno Finishing off this exhaust is a 3-1/2″ diameter polished tip. The tip comes with a laser-cut aFe Power badge riveted on for an aggressive style. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 3-1/2″ Dia. Polished Middle-Side Exit Tips: Finishing off the exhaust are dual 3-1/2″ diameter polished 304 stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. Th e bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• High-Flow Stainless Steel Muffler
• Aggressive Sound
• Complete w/Necessary Hardware

aFe power introduces the MACH Force-Xp cat-back exhaust system for the 2005-2012 Toyota Tacoma with L4-2.7L engine. This cat-back exhaust is constructed out of 2-1/2 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno. Finishing off this exhaust is a 4 diameter black tip. The tip comes with a laser-etched aFe Power badge riveted on for an aggressive style.

Product Features:

• Produces An Astonishing 9 HP And 10 ft./lbs. Torque
• Made From Mandrel Bent Stainless Steel Tubing For Maximum Flow
• High Quality Flange And Band Clamps Improve Sealing Surface
• Straight Through Design Free-Flowing Stainless Steel Muffler

This system fits all wheelbases (ACSB, ACLB, CCSB, CCLB) and produces an astonishing 26 HP and 30lbs. x ft. torque at the wheels. The cat-back design is constructed using 3″ mandrel-bent 409 stainless steel, and includes a free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of the exhaust system helps remove horsepower robbing restriction and keep exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with an aggressive black 304 stainless steel, rolled slash cut tip for an aggressive style.

Product Features:

• 3 in. Mandrel Bent 409 Stainless Steel Tubing
• Hassle Free Installation
• Free Flow Muffler
• Aggressive Sound

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Features Patented Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade T-304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

aFe power introduces the MACH Force-Xp cat-back exhaust system for the 2005-2012 Toyota Tacoma with L4-2.7L engine. This cat-back exhaust is constructed out of 2-1/2 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno. Finishing off this exhaust is a 4 diameter black tip. The tip comes with a laser-etched aFe Power badge riveted on for an aggressive style.

Product Features:

• Produces An Astonishing 9 HP And 10 ft./lbs. Torque
• Made From Mandrel Bent Stainless Steel Tubing For Maximum Flow
• High Quality Flange And Band Clamps Improve Sealing Surface
• Straight Through Design Free-Flowing Stainless Steel Muffler

Introducing the new aFe Power MACH Force XP dual exhaust system for the 05-09 Ford Mustang V6-4.0L. In recent testing, this system produced 12 horsepower and 16 lbs. x ft. of torque. This exhaust is constructed from 2.5in. mandrel bent, stainless steel and is MIG-welded. Dual high flow, stainless steel, single in, single out mufflers are used to maximize performance across the power band while maintaining a great tone. To finish off this exhaust aFe uses dual, laser etched, 3.5in. polished 304 stainless steel tips. Note: The V8 rear bumper cover is recommended (Ford OE Part Number 5R3Z17K835BAA). The use of the OE V6 bumper cover requires cutting and should be performed by a skilled technician.

Product Features:

• 3 in. Mandrel Bent 409 Stainless Steel Tubing
• Hassle Free Installation
• Free Flow Muffler
• Aggressive Sound

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Features Patented Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade T-304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds