2007 GMC Savana 3500 Fuel Injectors

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
• High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
• Fiber-optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

• Each unit is 100% tested to OE specifications
• Includes new O-rings and seals made of premium OE quality materials
• Includes application specific technical bulletin, where applicable

ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
• Allows for a quick throttle response
• Assists in cold engine starts
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• State-of-the-art designs that meet or exceed OE specifications
• Top-of-the-line quality and performance
• With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• State-of-the-art designs that meet or exceed OE specifications
• Top-of-the-line quality and performance
• With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

• Each unit is 100% tested to OE specifications
• Includes 100% replacement of nozzle to ensure accurate and precise injection under all operating parameters
• Includes all new premium quality O-rings and seals
• Includes copper combustion gasket
• Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

• Each unit is 100% tested to OE specifications
• Includes 100% replacement of nozzle to ensure accurate and precise injection under all operating parameters
• Includes all new premium quality O-rings and seals
• Includes copper combustion gasket
• Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

• All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
• Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
• All components are renewed or replaced as necessary to ensure high quality and durability
• When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
• Guaranteed fit and function
• Meets or exceeds O.E.M. performance

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

• All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
• Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
• All components are renewed or replaced as necessary to ensure high quality and durability
• When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
• Guaranteed fit and function
• Meets or exceeds O.E.M. performance

ACDelco GM Original Equipment Remanufactured Fuel Injectors are GM-recommended replacements for your vehicle’s original components. They are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion. The engine control module (ECM) operates the injectors by applying an electric current to the injector solenoid winding – this causes the needle valve to open, allowing pressurized fuel to be atomized into the intake airstream. Remanufacturing the fuel injector is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and completed units are tested to help ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. These fuel injectors will provide the same performance, durability, and service life you expect from ACDelco.

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
• Allows for a quick throttle response
• Assists in cold engine starts

The ACDelco GM Original Equipment Fuel Injector is a GM-recommended replacement for your vehicle’s original component. The Fuel Injector is an electro-magnetic valve that meters fuel into the engine’s intake manifold or cylinders for combustion. The engine management computer operates the injector by applying an electric current to the injector solenoid winding – this causes the needle valve to open, and allows the pressurized fuel to be atomized into the intake airstream. This original equipment fuel injector has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Atomize fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

• 100% O-ring replacement
• All Delphi injectors are tested utilizing OE methodologies
• Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
• No internal seal rings equals minimized leakage
• Recessed fuel exit minimizing possible plugging
• Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
• Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.End of line testing using the exact OE test specifications.Guaranteed to provide OE performance and meet all emission specifications.Continuous improvement, manufactured with the latest upgrades to components and specifications. Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, And Asian vehicles.

Product Features:

• 100% of injectors are end of line tested using the exact OE test specifications and equipment
• Manufactured with the latest OE updates, so they can often be superior to the parts they replace
• Manufactured using all OE tools and processes
• Guaranteed to provide OE performance

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.End of line testing using the exact OE test specifications.Guaranteed to provide OE performance and meet all emission specifications.Continuous improvement, manufactured with the latest upgrades to components and specifications. Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, And Asian vehicles.

Product Features:

• 100% of injectors are end of line tested using the exact OE test specifications and equipment
• Manufactured with the latest OE updates, so they can often be superior to the parts they replace
• Manufactured using all OE tools and processes
• Guaranteed to provide OE performance

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

• 100% O-ring replacement
• All Delphi injectors are tested utilizing OE methodologies
• Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
• No internal seal rings equals minimized leakage
• Recessed fuel exit minimizing possible plugging
• Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
• Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock