In-store Pickup
Free Shipping Over $35
Free In-store Services
2006 Nissan Altima Engine Mount
Your 2006 Nissan Altima might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Engine Mount product you desperately need.
We currently carry 24 Engine Mount products to choose from for your 2006 Nissan Altima, and our inventory prices range from as little as $33.49 up to $205.99.
On top of low prices, Advance Auto Parts offers 7 different trusted brands of Engine Mount products for the 2006 Nissan Altima. We only sell parts from trusted brands like Anchor so that you can find quality parts you can count on.
Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 102 reviews on our Engine Mount products for the 2006 Nissan Altima from previous customers.
Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Engine Mount stock in-person!
Engine Mount for Your 2006 Nissan Altima
Search through our amazing selection of Engine Mount products for your 2006 Nissan Altima to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.
-
Anchor - 9167 Engine Mount - Front (Part No. 9167)
DescriptionThe Engine mount is to support the engine and dampen vibration. Each mount is specifically engineered and designed to OEM standards. 02-06 Nissan
Product Features:- For Years: 2002-2006
- Weighs 4lbs (approximately)
Read 3 review(s)Review snapshot ® by PowerReviews
-
Yes
Yes
Submitted 2018-06-09
By Craig
From undisclosed
Great part
Bottom Line NULL
-
goo product
goo product
Submitted 2016-09-17
By j
From san antonio tx
Helped
Bottom Line recommended
-
A little tricky to install!
A little tricky to install!
Submitted 2015-01-27
By justfxnmystuff
From Florida
This mount was a little tricky to install, but took my time and all turned out great! I replaced this mount and the passenger side one, engine is smoother when shifting now and while driving. Don't forget to look up discount codes to save a few bucks!
Bottom Line recommended
from $74.99
View Product -
Anchor - 9209 Engine Mount - Rear (Part No. 9209)
DescriptionThe Engine mount is to support the engine and dampen vibration. Each mount is specifically engineered and designed to OEM standards. 02-06 Nissan
Product Features:- For Years: 2002-2006
- Weighs 5lbs (approximately)
Read 2 review(s)Review snapshot ® by PowerReviews
-
Yes
Yes
Submitted 2018-06-09
By Craig
From undisclosed
Great part
Bottom Line NULL
-
Easy job
Easy job
Submitted 2014-07-10
By Jomidan
From Miami, Fl.
Lousy description This is not a transmission mount. This is an engine mount.
Bottom Line recommended
from $88.99
View Product -
Anchor - 9190 Engine Mount - Front Right (Part No. 9190)
DescriptionThe Engine mount is to support the engine and dampen vibration. Each mount is specifically engineered and designed to OEM standards. 02-06 Nissan
Product Features:- For Years: 2002-2006
- Weighs 3lbs (approximately)
Read 3 review(s)Review snapshot ® by PowerReviews
-
If I need it again I will get it.
If I need it again I will get it.
Submitted 2020-02-26
By Dorene
From Undisclosed
It worked.
Bottom Line NULL
-
Works for me.
Works for me.
Submitted 2019-11-26
By Brian
From Undisclosed
My engine was rolling and hitting the other mounts everytime I accelerated hard or downshifted. This fixed it, so I'm pleased with it. Straight forward to install and the price was right.
Bottom Line NULL
-
I would pay this part again
I would pay this part again
Submitted 2018-04-08
By Craig
From undisclosed
Part fit good
Bottom Line NULL
from $104.99
View Product -
Anchor - Engine Mount (Part No. 9713)
DescriptionThe Engine mount is to support the engine and dampen vibration. Each mount is specifically engineered and designed to OEM standards. 02-09 Nissan
Product Features:- For Years: 2002-2009
- Weighs 5lbs (approximately)
- Hydraulic
- With Wire / Sensor
Read 3 review(s)Review snapshot ® by PowerReviews
-
Very good motor mount at a good price.
Very good motor mount at a good price.
Submitted 2020-03-23
By Alan
From Undisclosed
My original front engine mount was causing a terrible vibration when driving and clunking noises when shifting into drive or reverse. This replacement mount solved both issues and now the car is as smooth as when it was new. I performed the change myself and it installed with no issues. I would recommend purchasing.
Bottom Line NULL
-
What you paid
What you paid
Submitted 2018-08-27
By NGHIA
From Undisclosed
Work OK on the van, difficult to install, the electrical hardness wasn't fit.
Bottom Line NULL
-
Would not purchase this front engine mount again
Would not purchase this front engine mount again
Submitted 2018-05-23
By Fish Head
From Snellville, Ga.
Don't normally post reviews but I just have to on this part. This engine mount has a sensor made to it, the wire comes out of the left side of the mount. This mount is very hard to change out. After getting the mount in place and the top pivot bolt in (wire coming out of the left side of mount) I figured out the mount was in backward. The manufacturer had the wire coming out of the wrong side. If the wire comes out on the right side it is right next to the catalytic converter and will burn. I rerouted the wire and had to drill a small hole on the left side of the mount to snap in the plastic wire retainer. Also the connector on the engine wiring harness would not plug right in, I had to use a razor blade and and modify it so it would plug into the female plug on the engine mount sensor. Do know that this mount is made in China but for what it cost you would think it would fit without mods. I could have bought a similar mount online for half the cost of this one but I needed it right now. Would not buy again. Do yourself a favor and drop the coolant and remove the electric fans to make this job easier although it is very hard to purge the cooling system of air on the Nisssan 3.5. without the proper tool.
Bottom Line not recommended
from $142.99
View Product -
Beck/Arnley - Engine Mount (Part No. 104-1734)
DescriptionBeck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:- Mount type is an exact match to OE (hydraulic, vacuum, active, etc.)
- Premium materials to dampen vibration
- Additional factory parts included where applicable
- Designed for underhood conditions
- Application specific for this vehicle
Read 1 review(s)Review snapshot ® by PowerReviews
-
Exact match
Exact match
Submitted 2011-03-27
By Cookie
From Baton Rouge, LA
Part [...] was exact match. Price was good,[...]
Bottom Line recommended
from $99.99
View Product -
Anchor - 9223 Engine Mount - Right, Front Right (Part No. 9223)
DescriptionThe Engine mount is to support the engine and dampen vibration. Each mount is specifically engineered and designed to OEM standards. 02-09 Nissan
Product Features:- For Years: 2002-2009
- Weighs 5lbs (approximately)
Read 3 review(s)Review snapshot ® by PowerReviews
-
Nice replacement at a good price
Nice replacement at a good price
Submitted 2020-06-08
By Alan
From Undisclosed
Very good part. Replaced an old worn out mount. Eliminated a bad vibration and now the engine is secure and smooth again.
Bottom Line NULL
-
May or may not buy it again.
May or may not buy it again.
Submitted 2018-08-27
By NGHIA
From Undisclosed
The product is OK but the electrical hardness doesn't fit. Little difficult for installation.
Bottom Line NULL
-
Perfect Replacement
Perfect Replacement
Submitted 2017-04-24
By RC
From Kenner, La
Takes a few minutes to align the holes...but it works.
Bottom Line recommended
from $115.99
View Product -
Anchor - 9252 Engine Mount - Front (Part No. 9252)
DescriptionThe Engine mount is to support the engine and dampen vibration. Each mount is specifically engineered and designed to OEM standards. 02-09 Nissan
Product Features:- For Years: 2002-2009
- Weighs 5lbs (approximately)
- Hydraulic
- Without Wire / Sensor
Read 2 review(s)Review snapshot ® by PowerReviews
-
Would buy it again
Would buy it again
Submitted 2021-03-07
By Felix
From Undisclosed
Great price and quality
Bottom Line NULL
-
NOT a true replacement part!!!
NOT a true replacement part!!!
Submitted 2010-06-07
By Andrew
From Houston, TX
The product does NOT have a place to re-install the factory sensor that goes underneath the mount. No check engine like will go on but I had to zip tie the sensor to a bracket so it wouldn't move around in the engine bay. It was very difficult to remove the mount and to re-install the new one so that is the reason why I just kept it the way it is. I save some money getting this product instead of the factory one but I wouldn't recommend purchasing this item if your really worried about not having the sensor functioning. This mount is used on most earlier model Nissan and Infiniti. If the product suppose to be a replacement part then it should be able to fully replace the factory part but surely it didn't since a key component was missing.
Bottom Line not recommended
from $37.49
View Product -
Beck/Arnley - Engine Mount (Part No. 104-1915)
DescriptionBeck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:- Mount type is an exact match to OE (hydraulic, vacuum, active, etc.)
- Premium materials to dampen vibration
- Additional factory parts included where applicable
- Designed for underhood conditions
- Application specific for this vehicle
Read 3 review(s)Review snapshot ® by PowerReviews
-
Works fine
Works fine
Submitted 2015-11-02
By Yugedrums
From Florence SC
Purchased this to attempt to eliminate a "clunking" sound when accelerating/decelarating, which changing this part did not eliminate. The old one's bushing was all broken/cracked, so replacement was still worthwhile. Removal/replacement was a pain, due to it's location, but I got it done. You must remove battery, battery tray, and something that looks like a weight/vibration dampener thing mounted to the front rail, as well as the lower shroud, then work on the mount from the above/driver's side and from below. The bracket that mounts the engine mount to the block (4 bolts) must come off as well, or the mount will not come out. Busted knuckles and half a day later, it's done. The electrical connection for the sensor plugged up like factory and worked as intended, with no dinging as mentioned above.
Bottom Line recommended
-
Had to Unplug this Mount
Had to Unplug this Mount
Submitted 2013-03-05
By Maxima Driver
From Orlando, FL
I ordered this part online and had it installed by a local mechanic. After bringing it home the mount was buzzing for 3 seconds at a time when starting the car, when shutting the engine off and at other times when running. I took it back to the mechanic & he said the electronic portion was defective, so he unplugged it. It is not buzzing now, but I'm not 100% pleased.
Bottom Line not recommended
-
good quality works great
good quality works great
Submitted 2011-06-14
By Tom
From Brandon Fl
Great response[...]
Bottom Line recommended
from $205.99
View Product -
International Suspension Group - International Suspension Group Engine Mount (Part No. A7000392262ISG)
DescriptionInternational Suspension Group engine and transmission mounts are designed to the highest quality standards and manufactured using leading-edge technology.
Product Features:- High quality steel for mounts cast aluminum or steel frames (e-Coating being employed for corrosion resistance)
- Rubber: high quality NVH rubber which is same used in OE applications
- All mounts meet or exceed OEM specifications utilizing OE quality testing procedures
- ISO/TS16949 manufacturer for OE contracts
- All included hardware made of hardened steel with superior bolts
- Hydro-Electric mounts have the same number of components as OE, where applicable
- Electrical connectors are fully functional
Read 1 review(s)Review snapshot ® by PowerReviews
-
Did not Fit
Did not Fit
Submitted 2017-09-18
By A-Train
From Upstate, SC
The part was not dimensionally correct and high centered on the center bolt hole on the engine side bracket.
Bottom Line not recommended
from $62.76
View Product -
Beck/Arnley - Engine Mount (Part No. 104-1782)
DescriptionBeck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:- Mount type is an exact match to OE (hydraulic, vacuum, active, etc.)
- Premium materials to dampen vibration
- Additional factory parts included where applicable
- Designed for underhood conditions
- Application specific for this vehicle
Read 1 review(s)Review snapshot ® by PowerReviews
-
Not Exact Fit For 2005 Nissan Altima
Not Exact Fit For 2005 Nissan Altima
Submitted 2013-03-25
By Matt
From San Antonio, TX
This mount required significant filing of holes and weldments before it would fit onto a 2005 Nissan Altima 2.5 S. I recommend trying another brand to replace the front motor mount in order to save time.
Bottom Line not recommended
from $51.99
View Product -
Anchor - Engine Mount (Part No. 9548)
DescriptionThe Engine mount is to support the engine and dampen vibration. Each mount is specifically engineered and designed to OEM standards. 04-09 Nissan
Product Features:- For Years: 2004-2009
- Weighs 5lbs (approximately)
- Hydraulic
- Without Wire / Sensor
from $86.99
View Product -
Beck/Arnley - Engine Mount (Part No. 104-1784)
DescriptionBeck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:- Mount type is an exact match to OE (hydraulic, vacuum, active, etc.)
- Premium materials to dampen vibration
- Additional factory parts included where applicable
- Designed for underhood conditions
- Application specific for this vehicle
from $103.99
View Product -
Anchor - 9547 Engine Mount - Rear (Part No. 9547)
DescriptionThe Engine mount is to support the engine and dampen vibration. Each mount is specifically engineered and designed to OEM standards. 02-06 Nissan
Product Features:- For Years: 2002-2006
- Weighs 5lbs (approximately)
from $43.99
View Product -
Anchor - 9592 Engine Mount - Front (Part No. 9592)
DescriptionThe Engine mount is to support the engine and dampen vibration. Each mount is specifically engineered and designed to OEM standards. 02-06 Nissan
Product Features:- For Years: 2002-2006
- Weighs 4lbs (approximately)
from $33.49
View Product -
International Suspension Group - Engine Mount (Part No. A7000296708ISG)
DescriptionInternational Suspension Group engine and transmission mounts are designed to the highest quality standards and manufactured using leading-edge technology.
Product Features:- High quality steel for mounts cast aluminum or steel frames (e-Coating being employed for corrosion resistance)
- Rubber: high quality NVH rubber which is same used in OE applications
- All mounts meet or exceed OEM specifications utilizing OE quality testing procedures
- ISO/TS16949 manufacturer for OE contracts
- All included hardware made of hardened steel with superior bolts
- Hydro-Electric mounts have the same number of components as OE, where applicable
- Electrical connectors are fully functional
from $156.10
View Product -
DEA - Engine Mount (Part No. A7000296708DEA)
DescriptionMarmon Ride Control (formerly DEA Products) has been a trusted manufacturer of motor mounts in the aftermarket industry for over 30 years. Marmon Ride Control uses the highest quality of raw materials available, and thoroughly tests their products with state-of-the-art lab equipment to ensure that you'll be installing a mount that will meet or exceed your original mount's specifications.
Product Features:- USA Development and OEM laboratory - 14 OEM Engineers
- Design Solutions and Installation Enhancements to Failing OEM designs
- Complete Factory Testing and Vehicle Verification Resources
from $145.60
View Product -
Original Equipment - Original Equipment Engine Mount (Part No. A7000128751OEA)
DescriptionThe Original Equipment Engine Mount is the ORIGINAL part, supplied in a plain box, with the car manufacturer's logo on the part.
Product Features:- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce engine vibration and noise.
from $116.81
View Product -
Beck/Arnley - Engine Mount (Part No. 104-1997)
DescriptionBeck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:- Mount type is an exact match to OE (hydraulic, vacuum, active, etc.)
- Premium materials to dampen vibration
- Additional factory parts included where applicable
- Designed for underhood conditions
- Application specific for this vehicle
from $99.99
View Product -
International Suspension Group - International Suspension Group Engine Mount (Part No. A7000140152ISG)
DescriptionInternational Suspension Group engine and transmission mounts are designed to the highest quality standards and manufactured using leading-edge technology.
Product Features:- High quality steel for mounts cast aluminum or steel frames (e-Coating being employed for corrosion resistance)
- Rubber: high quality NVH rubber which is same used in OE applications
- All mounts meet or exceed OEM specifications utilizing OE quality testing procedures
- ISO/TS16949 manufacturer for OE contracts
- All included hardware made of hardened steel with superior bolts
- Hydro-Electric mounts have the same number of components as OE, where applicable
- Electrical connectors are fully functional
from $68.01
View Product -
MTC - MTC Engine Mount (Part No. A7000140052MTC)
DescriptionThe MTC Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.
Product Features:- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce engine vibration and noise.
from $59.39
View Product -
MTC - MTC Engine Mount (Part No. A7000128753MTC)
DescriptionThe MTC Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.
Product Features:- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce engine vibration and noise.
from $58.31
View Product -
DEA - Engine Mount (Part No. A7000140052DEA)
DescriptionMarmon Ride Control (formerly DEA Products) has been a trusted manufacturer of motor mounts in the aftermarket industry for over 30 years. Marmon Ride Control uses the highest quality of raw materials available, and thoroughly tests their products with state-of-the-art lab equipment to ensure that you'll be installing a mount that will meet or exceed your original mount's specifications.
Product Features:- USA Development and OEM laboratory - 14 OEM Engineers
- Design Solutions and Installation Enhancements to Failing OEM designs
- Complete Factory Testing and Vehicle Verification Resources
from $56.78
View Product -
International Suspension Group - Engine Mount (Part No. A70001184079ISG)
DescriptionInternational Suspension Group engine and transmission mounts are designed to the highest quality standards and manufactured using leading-edge technology.
Product Features:- High quality steel for mounts cast aluminum or steel frames (e-Coating being employed for corrosion resistance)
- Rubber: high quality NVH rubber which is same used in OE applications
- All mounts meet or exceed OEM specifications utilizing OE quality testing procedures
- ISO/TS16949 manufacturer for OE contracts
- All included hardware made of hardened steel with superior bolts
- Hydro-Electric mounts have the same number of components as OE, where applicable
- Electrical connectors are fully functional
from $42.42
View Product -
Autopart International Inc - Engine Mount (Part No. A7000140152API)
from $37.08
View Product
FAQs for 2006 Nissan Altima Engine Mount Products
What are the most popular 2006 Nissan Altima Engine Mount products?
Replacing your Engine Mount on your 2006 Nissan Altima? Find our most popular parts below:What are the top user-rated Engine Mount products for the 2006 Nissan Altima?
