2005 Chevrolet Tahoe Differentials

Essential 2005 Chevrolet Tahoe Differentials

Yukon Gear – Pinion Nut Washer (Part No.33167)

Pinion Nut Washer

from

$14.99
Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:
  • Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
See More

Yukon Gear – Differential Cover B (Part No.33569)

Differential Cover B

from

$5.99
Differential Cover B

Dorman – Front Left Inner Axle Shaft Assembly (Part No.630-636)

Front Left Inner Axle Shaft Assembly

from

$199.99
Axle shaft damaged or bearings worn out? This axle shaft assembly directly replaces the original equipment on certain vehicles, ready for install right out of the box.

Product Features:
  • Direct replacement – this axle shaft assembly replaces the original equipment on specific vehicle years, makes and models
  • Ready to install – comes pre-assembled for simple installation with no further assembly required
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Yukon Gear – Cast Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41092)

Cast Yoke For GM 8.5" With A 1350 U/Joint Size

from

$234.99
Yukon cast yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.5″
  • 30 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Strap style
See More

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R8.2RIFSLMK)

Differential Master Bearing Kit - Koyo

from

$161.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • GM 8.25IFS MASTER KIT ’98-ON
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For GM 8.25" IFS Reverse Rotation In A 4.56 Ratio (Part No.24154)

High Performance Ring & Pinion Gear Set For GM 8.25" IFS Reverse Rotation In A 4.56 Ratio

from

$454.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. 2010 GM 8.25IFS Front ends equipped w/ factory 3.08 gear will need a new carrier when changing ratio. When purchasing 3.42 & up gears for a factory 3.08 application you must also purchase a YC G26018131 case with it. Deck Height w/ 3.08 Ratio 1.780″ Deck height w/ 3.42 & up Ratio 1.920″.

Product Features:
  • Fits 2013 and down GM 8.25″ IFS
  • 8.25″ ring gear diameter
  • 30 spline pinion
  • 10 ring gear bolts
  • 4.56 ratio
See More

Yukon Gear – Super Carrier Shim Kit For GM 9.5" (Part No.55003)

Super Carrier Shim Kit For GM 9.5"

from

$29.99
9.5″ GM differential carrier Supershim kit.

Product Features:
  • Super carrier shim kit for GM 9.5″
  • Interlocking design makes installation much easier
See More

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – 8.6" GM Standard Open Side Gear Thrust Washer (Part No.33386)

8.6" GM Standard Open Side Gear Thrust Washer

from

$4.99
8.6″ GM standard Open side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 8.6″
See More

Yukon Gear – GM 9.5" Ring Gear Bolt (Part No.33047)

GM 9.5" Ring Gear Bolt

from

$12.99
GM 9.5″ ring gear bolt. 12mm x 1.5.

Product Features:
  • Ring gear bolt for GM 9.2″
  • 12mm x 1.5
See More

Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-500)

Differential Yoke including Seal and Pinion Nut

from

$139.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – 8.25" GM Cross Pin Roll Pin (Part No.33410)

8.25" GM Cross Pin Roll Pin

from

$7.99
8.25″ GM cross pin roll pin.

Product Features:
  • Roll pin
  • Fits GM 8.25″ IFS
See More

Yukon Gear – Eaton Positraction Shim Kit For 9.5" GM (Part No.16059)

Eaton Positraction Shim Kit For 9.5" GM

from

$47.99
Eaton positraction shim kit for 9.5″ GM.

Product Features:
  • Shim kit
  • Fits GM 9.5″ Eaton positraction
See More

Yukon Gear – 10 Bolt Open Spider Gear Set For ’00-’06 8.6" GM With 30 Spline Axles (Part No.16056)

10 Bolt Open Spider Gear Set For '00-'06 8.6" GM With 30 Spline Axles

from

$207.99
10 Bolt open spider gear set for ’00-’06 8.6″ GM with 30 spline axles. Fits case with one large window and one small window. A new carrier case will be needed for ’99 vehicles in order to use this spider gear set. This spider gear set fits casting number 7875 & 1073.

Product Features:
  • Spider gear kit
  • Fits 2000-2006 GM 8.6″ open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-35)

Tapered Cone/Cup Wheel Bearing Set

from

$13.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

ATP – Remanufactured Front Differential Assembly (Part No.111503)

Remanufactured Front Differential Assembly

from

$3289.99
Brand new units are no longer available. ATP’s fully remanufactured differentials offer the best alternative to bench rebuilding or buying used. They are carefully inspected and totally reconditioned to meet original specifications and include new bearings and seals. Our units are ready to install, just add oil.

Product Features:
  • Ready to install, just add oil
  • Totally reconditioned
  • New bearings
See More

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

from

$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:
  • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
See More

Yukon Gear – GM 8.25" IFS Side Adjuster, ’07 & Up (Part No.33356)

GM 8.25" IFS Side Adjuster, '07 & Up

from

$78.99
Product Features:
  • Side adjuster
  • Fits GM 8.2.5″ IFS
See More

Yukon Gear – Pinion Install Kit For GM 8.5" Differential (Part No.13069)

Pinion Install Kit For GM 8.5" Differential

from

$173.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits GM 8.5″ rear
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

ACDelco – Differential Cover with Hardware Included (Part No.J7019763692ACD)

Differential Cover with Hardware Included

from

$108.39
Differential Cover with Hardware Included

Yukon Gear – 8.2" & 8.5" Rear Cover Gasket (Part No.23020)

8.2" & 8.5" Rear Cover Gasket

from

$10.99
8.2″ & 8.5″ rear cover gasket.

Product Features:
  • Cover gasket
  • Fits GM 8.2″, 8.5″ and 8.6″
See More

Motive Gear – Differential Spool (Part No.FS10-30)

Differential Spool

from

$187.99


Product Features:
  • FULL SPOOL GM 8.5 30 SPL ST MUST USE 2-LM102911 & 2-LM102949
See More

Pro-King – Differential Pinion Gear Washer (Part No.742G216)

Differential Pinion Gear Washer

from

$2.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Positraction Internals For 9.5" GM With 33 Spline Axles (Part No.16057)

Positraction Internals For 9.5" GM With 33 Spline Axles

from

$606.99
Yukon positraction internals for 9.5″ GM with 33 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects. These internals are for Eaton positractions only. They will not fit factory positractions.

Product Features:
  • Spider gear kit
  • Fits GM 9.5″ with Eaton positraction
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Pro-King – Differential Internal Nest Kit (Part No.742D717)

Differential Internal Nest Kit

from

$221.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Pro-King – Differential Internal Nest Kit (Part No.742G717B)

Differential Internal Nest Kit

from

$191.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles (Part No.26016)

Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles

from

$929.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit has larger bearing journals for added strength & uses heavy-duty carrier bearings & races.

Product Features:
  • Fits GM 8.5″ and 8.6″ with 30 spline axles
  • 2.73 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

2005 Chevrolet Tahoe Differentials

Maybe you’re in the middle of a full rebuild of that 2005 Chevrolet Tahoe. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 321 different Differentials in our inventory ranging from $1.99 to $2,369.99. That means you can find the exact parts or products you need to keep that 2005 Chevrolet Tahoe running smoothly.

Differentials are only as good as their brand. We stock 21 different brands to make sure you have plenty of trusted parts to choose from for your 2005 Chevrolet Tahoe. Valvoline, Royal Purple, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2005 Chevrolet Tahoe, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 4,009 reviews in this category, some of the top rated parts include Drive Axle Assembly; GM SUV Posi Axle GU5 with 4.4 stars and Differential Cover Gasket with 4.3 stars.

So if you’re in the market for aftermarket Differentials to keep your 2005 Chevrolet Tahoe rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2005 Chevrolet Tahoe Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2005 Chevrolet Tahoe demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Tahoe the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 2005 Chevrolet Tahoe Differentials

What are the most purchased Differentials for the 2005 Chevrolet Tahoe?

Out of 321 Differentials for the 2005 Chevrolet Tahoe, the most popular in our inventory are:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Differential Cover Gaskets
Rear Differential Cover
from $51.99
(1)
Rear Differential Cover
Differential Covers

What are the top-rated 2005 Chevrolet Tahoe Differentials?

Top-rated Differentials for your 2005 Chevrolet Tahoe based on customer reviews/ratings are:
Drive Axle Assembly; GM SUV Posi Axle GU5
from $1841.99
(108)
Drive Axle Assembly; GM SUV Posi Axle GU5
“Good”
Differential Cover Gasket
from $7.99
(20)
Differential Cover Gasket
“Perfect fit”
Differential Carrier Gear Kit
from $231.99
(16)
Differential Carrier Gear Kit
“First set of gears were not complete. But staff reordered them, had them next day. Thanks”