2005 Chevrolet Silverado 1500 Mufflers

Mufflers for Your 2005 Chevrolet Silverado 1500

Search through our amazing selection of Mufflers products for your 2005 Chevrolet Silverado 1500 to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.

• 

  MagnaFlow - Straight-Through Stainless Muffler: 11219, 4x9x14" Oval , 3" Center Inlet / 3" Center Outlet (Part No. 11219)

  Description

  Fully reversible and featuring a free-flowing, straight-through perforated stainless steel core, stainless mesh wraps our acoustic fiber fill to deliver a smooth, deep tone for your custom exhaust project.
  
  Product Features:

  • Delivers a Smooth, Deep Tone
  • 100% Stainless Steel
  • Mufflers are Bi-Directional

  5.0

  Read 2 review(s)

  Review snapshot ® by PowerReviews

  5.0

  5.0

  • 5

    5

    2016-09-20

    5

    5

    Great sounding muffler

    Great sounding muffler

    Submitted 2016-09-20

    By Haxsaw

    From Gloucester, VA

    i just installed this on my 2013 GMC Sierra Z71 with a 4" tail pipe and 5" tip, has an awesome deep sound to it.

    Bottom Line recommended

    i just installed this on my 2013 GMC Sierra Z71 with a 4" tail pipe and 5" tip, has an awesome deep sound to it.

    By Haxsaw from Gloucester, VA

    BOTTOM LINE recommended

  • 5

    5

    2016-09-20

    5

    5

    Great sounding muffler

    Great sounding muffler

    Submitted 2016-09-20

    By Haxsaw

    From Gloucester, VA

    i installed this on my 2013 GMC Sierra Z71 and it sounds awesome.

    Bottom Line recommended

    i installed this on my 2013 GMC Sierra Z71 and it sounds awesome.

    By Haxsaw from Gloucester, VA

    BOTTOM LINE recommended

  from $143.99

  View Product
• 

  Walker - SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No. 18823)

  Description

  Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
  
  Product Features:

  • RESISTS CORROSION -- Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST -- Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • EASY TO INSTALL -- Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn't require specialized fabrication and/or welding
  • FACTORY SOUND -- Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER -- Designed and tested to extend muffler life

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 4

    4

    2020-11-22

    4

    4

    Possibly buy again if it lasts.

    Possibly buy again if it lasts.

    Submitted 2020-11-22

    By CHRISTOPHER

    From Undisclosed

    Seems good quality. Will see how it lasts.

    Bottom Line NULL

    Seems good quality. Will see how it lasts.

    By CHRISTOPHER from Undisclosed

    BOTTOM LINE NULL

  • 4

    4

    2020-04-30

    4

    4

    Muffler OK, but pipes needed work

    Muffler OK, but pipes needed work

    Submitted 2020-04-30

    By Doug, retired Master Mechanic

    From Dearborn, Michigan

    Bought entire exhaust from "Y" pipe, back. Muffler arrived boxed, no damage, quality as described. Good price. Pipes arrived with ends damaged required time/labor to make fit. Would buy muffler again, but not intermediate pipe and tail pipe

    Bottom Line recommended

    Bought entire exhaust from "Y" pipe, back. Muffler arrived boxed, no damage, quality as described. Good price. Pipes arrived with ends damaged required time/labor to make fit. Would buy muffler again, but not intermediate pipe and tail pipe

    By Doug, retired Master Mechanic from Dearborn, Michigan

    BOTTOM LINE recommended

  • 5

    5

    2020-04-27

    5

    5

    I would buy again

    I would buy again

    Submitted 2020-04-27

    By Dan

    From Undisclosed

    It fixed the problem

    Bottom Line NULL

    It fixed the problem

    By Dan from Undisclosed

    BOTTOM LINE NULL

  from $72.99

  View Product
• 

  Walker - Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No. 21356)

  Description

  The only broad-market muffler with 100% stainless-steel construction, Walker® Quiet-Flow® SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.
  
  Product Features:

  • CORROSION RESISTANT STAINLESS STEEL -- The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL -- Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn't require specialized fabrication and/or welding
  • BUILT TO LAST -- Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL -- OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED -- Acoustic and flow tested for quality OE-style sound you can count on

  3.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  3.5

  3.5

  • 5

    5

    2021-05-15

    5

    5

    DON'T NEED TO REPLACE TAIL OR INLET PIPE.

    DON'T NEED TO REPLACE TAIL OR INLET PIPE.

    Submitted 2021-05-15

    By DIVER DAVE

    From SPOTSYLVANIA VA

    LISTING FOR MUFFLER SAYS THAT YOU NEED TO REPLACE ALL PIPES ON OEM WELDED EXHAUST. I FOUND OUT THAT FOR MY TRUCK WHICH WAS ORIGINAL WB 133" THAT WAS NOT TRUE. i DID HAVE TO USE A 2 3/4 TO 2 3/4 ADAPTER FOR THE OUTLET AND THE INLET PIPE SLID RIGHT INTO THE MUFFLER. i DID HOWEVER USE A SAWS ALL TO CUT THE OLD OEM MUFFLER RIGHT AT THE MUFFLER ( 1/2" AWAY FROM IT ). I ALSO CUT 3/4 INCH OFF THE OUTLET OF THE REPLACEMENT MUFFLER. ALL YOU NEED IS THREE 2 3/4 CLAMPS AND 1 ADAPTER. SOUNDS GREAT. A LITTLE LOUDER THEN THE OLD MUFFLER.

    Bottom Line recommended

    LISTING FOR MUFFLER SAYS THAT YOU NEED TO REPLACE ALL PIPES ON OEM WELDED EXHAUST. I FOUND OUT THAT FOR MY TRUCK WHICH WAS ORIGINAL WB 133" THAT WAS NOT TRUE. i DID HAVE TO USE A 2 3/4 TO 2 3/4 ADAPTER FOR THE OUTLET AND THE INLET PIPE SLID RIGHT INTO THE MUFFLER. i DID HOWEVER USE A SAWS ALL TO CUT THE OLD OEM MUFFLER RIGHT AT THE MUFFLER ( 1/2" AWAY FROM IT ). I ALSO CUT 3/4 INCH OFF THE OUTLET OF THE REPLACEMENT MUFFLER. ALL YOU NEED IS THREE 2 3/4 CLAMPS AND 1 ADAPTER. SOUNDS GREAT. A LITTLE LOUDER THEN THE OLD MUFFLER.

    By DIVER DAVE from SPOTSYLVANIA VA

    BOTTOM LINE recommended

  • 1

    1

    2013-04-27

    1

    1

    Warning! Will need modification to fit

    Warning! Will need modification to fit

    Submitted 2013-04-27

    By Rust in my eyes

    From Buffalo NY

    Here's what they say about this muffler, (PN.21356) Walker Quiet-Flow Mufflers are designed using OE-style cross-sections for a precise fit, enhanced flow and OE-style sound quality. "OE style" and "precise fit" are great buzzwords to get you to buy. Here's the real deal. 1)Everything in an exaust system flows downstream. 2)You have to saw (cut) out the original muffler. 3)The "Y" pipe has a 2 bolt flange that connects to a pipe section that ends at the muffler.This pipe section is 2 3/4" dia. When you cut out the original muffler that pipe has to fit into the receiving pipe on the new muffler. All ok up to here because the engineers figured out that the receiving pipe on the muffler has to be 2 3/4"ID(able to accept 2 3/4 pipe into it)or maybe they just didn't think about it and got lucky here. 4)This is where the engineers really designed a bad product. The outlet on the muffler was made 2 3/4 even (can neither go over or into the pipe) Since everything flows downstream this outlet should be 2 3/4 OD.(able to go into the tailpipe)5)Since there are no available 2 3/4 ID to 2 3/4 OD couplers (check it out), 6)The outlet pipe on the muffler has to be notched with a sawsall 1/4" wide and almost all the way down the length to about 1/2" shy of muffler.(only one notch)put on a 2 3/4 clamp and tighten it down until it closes the gap up. If you put another clamp on 90 degrees out and tighten it up you won't egg shape. Mig weld the gap from the inside (or outside and grind down).Can't have any leaks.Remove clamps. 7)Install. Insert into tailpipe and clamp. Clamp the inlet side and your done. EASY AS PIE. The second bummer here is that the muffler is advertised as STAINLESS but the inlet and outlet are soft cheap iron pipe and these will be the parts that will rot away, fast.

    Bottom Line not recommended

    Here's what they say about this muffler, (PN.21356) Walker Quiet-Flow Mufflers are designed using OE-style cross-sections for a precise fit, enhanced flow and OE-style sound quality. "OE style" and "precise fit" are great buzzwords to get you to buy. Here's the real deal. 1)Everything in an exaust system flows downstream. 2)You have to saw (cut) out the original muffler. 3)The "Y" pipe has a 2 bolt flange that connects to a pipe section that ends at the muffler.This pipe section is 2 3/4" dia. When you cut out the original muffler that pipe has to fit into the receiving pipe on the new muffler. All ok up to here because the engineers figured out that the receiving pipe on the muffler has to be 2 3/4"ID(able to accept 2 3/4 pipe into it)or maybe they just didn't think about it and got lucky here. 4)This is where the engineers really designed a bad product. The outlet on the muffler was made 2 3/4 even (can neither go over or into the pipe) Since everything flows downstream this outlet should be 2 3/4 OD.(able to go into the tailpipe)5)Since there are no available 2 3/4 ID to 2 3/4 OD couplers (check it out), 6)The outlet pipe on the muffler has to be notched with a sawsall 1/4" wide and almost all the way down the length to about 1/2" shy of muffler.(only one notch)put on a 2 3/4 clamp and tighten it down until it closes the gap up. If you put another clamp on 90 degrees out and tighten it up you won't egg shape. Mig weld the gap from the inside (or outside and grind down).Can't have any leaks.Remove clamps. 7)Install. Insert into tailpipe and clamp. Clamp the inlet side and your done. EASY AS PIE. The second bummer here is that the muffler is advertised as STAINLESS but the inlet and outlet are soft cheap iron pipe and these will be the parts that will rot away, fast.

    By Rust in my eyes from Buffalo NY

    BOTTOM LINE not recommended

  • 4

    4

    2013-04-09

    4

    4

    Quiet and good fit

    Quiet and good fit

    Submitted 2013-04-09

    By Mike

    From Mt. Vernon, OH

    good overall build quality, just a little shorter than original equip. muffler shop installed. looks good and sounds good, no louder than oem.

    Bottom Line recommended

    good overall build quality, just a little shorter than original equip. muffler shop installed. looks good and sounds good, no louder than oem.

    By Mike from Mt. Vernon, OH

    BOTTOM LINE recommended

  from $134.99

  View Product
• 

  Walker - SoundFX Muffler, Universal/ Fabrication Needed (Part No. 18138)

  Description

  Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
  
  Product Features:

  • RESISTS CORROSION -- Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST -- Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • FLEXIBLE SOLUTION -- Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • FACTORY SOUND -- Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER -- Designed and tested to extend muffler life

  from $61.99

  View Product
• 

  Dynomax - Ultra Flo Muffler, 3in Centered Inlet 3in Centered Outlet, 19in long, Reversable, Stainless Steel (Part No. 17223)

  Description

  DynoMax® Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler
  
  Product Features:

  • Stainless steel construction for lifelong protection
  • 100% welded design for maximum durability
  • Straight through design ensures unrestricted exhaust flow and reduces back pressure
  • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
  • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

  from $122.99

  View Product
• 

  MagnaFlow - Straight-Through Stainless Muffler: 14221, 5x8x14" Oval , 3" Center Inlet / 2.5" Dual Outlet (Part No. 14221)

  Description

  Fully reversible and featuring a free-flowing, straight-through perforated stainless steel core, stainless mesh wraps our acoustic fiber fill to deliver a smooth, deep tone for your custom exhaust project.
  
  Product Features:

  • Delivers a Smooth, Deep Tone
  • 100% Stainless Steel
  • Mufflers are Bi-Directional

  from $207.99

  View Product
• 

  MagnaFlow - Straight-Through Stainless Muffler: 12649, 6x6x18" Round , 3" Center Inlet / 3" Center Outlet (Part No. 12649)

  Description

  Fully reversible and featuring a free-flowing, straight-through perforated stainless steel core, stainless mesh wraps our acoustic fiber fill to deliver a smooth, deep tone for your custom exhaust project.
  
  Product Features:

  • Delivers a Smooth, Deep Tone
  • 100% Stainless Steel
  • Mufflers are Bi-Directional

  from $159.99

  View Product
• 

  AP Exhaust - Muffler (Part No. H50001528236APE)

  from $138.32

  View Product