In-store Pickup
Free Shipping Over $25
Free In-store Services
2004 GMC Safari Idler Arm
2004 GMC Safari Idler Arm
Your 2004 GMC Safari might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Idler Arm product you desperately need.
We currently carry 18 Idler Arm products to choose from for your 2004 GMC Safari, and our inventory prices range from as little as $39.99 up to $132.69.
On top of low prices, Advance Auto Parts offers 7 different trusted brands of Idler Arm products for the 2004 GMC Safari. We only sell parts from trusted brands like Driveworks so that you can find quality parts you can count on.
Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 34 reviews on our Idler Arm products for the 2004 GMC Safari from previous customers.
Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Idler Arm stock in-person!
Idler Arm for Your 2004 GMC Safari
Search through our amazing selection of Idler Arm products for your 2004 GMC Safari to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.
-
MOOG - Idler Arm (Part No. K6366T)
DescriptionMOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:- Heavy-duty design
- Loose or worn chassis parts can lead to premature tire wear
- Engineered steel composition results in a stronger component
- Powdered metal gusher bearing design enables grease to flow through bearing to
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Read 2 review(s)Review snapshot ® by PowerReviews
-
GOOD/Better replacement for the worn out DriveWorks part
GOOD/Better replacement for the worn out DriveWorks part
Submitted 2017-12-03
By Brian
From undisclosed
The Moog idler arm was purchased (1 of 2 as a GMC Safari takes two) to replace the DriveWorks idler arm which was worn out after only 11 months of service. The Moog part appeared well made, the grease fitting actually threaded in with no problem and were accessible after installation, the bolts lined up, the tapered fit of the actual joint was proper sized and did not require spacers so the cotter key would work, etc. The Moog part is more than twice the cost of the 1 yr warranty DriveWorks part, but to be honest, who EVER wants suspension parts that wear out in less than a year unless you are selling the vehicle soon.
Bottom Line NULL
-
Never let down by Moog
Never let down by Moog
Submitted 2011-04-04
By BYM
From Chicago
Easy to install, good fit, incs necs hardware.
Bottom Line recommended
from $129.99
View Product -
MOOG - Idler Arm (Part No. K6392T)
DescriptionMOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:- Heavy-duty design
- Loose or worn chassis parts can lead to premature tire wear
- Engineered steel composition results in a stronger component
- Powdered metal gusher bearing design enables grease to flow through bearing to
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Read 1 review(s)Review snapshot ® by PowerReviews
-
I would buy this product again
I would buy this product again
Submitted 2011-03-18
By Ron
From Harrisburg, Pa
I have used in the past, very good product, pretty straight forward to install, no problems.
Bottom Line recommended
from $109.99
View Product -
MOOG - Idler Arm (Part No. K6365T)
DescriptionMOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:- Heavy-duty design
- Loose or worn chassis parts can lead to premature tire wear
- Engineered steel composition results in a stronger component
- Powdered metal gusher bearing design enables grease to flow through bearing to
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Read 3 review(s)Review snapshot ® by PowerReviews
-
Yes I would buy again
Yes I would buy again
Submitted 2018-03-11
By Daniel
From undisclosed
Great product. I should have bought the moog on the first idler arm. The off brand I bought the first time only last 3 years..
Bottom Line NULL
-
GOOD replacement for the premature failure DriveWorks part!
GOOD replacement for the premature failure DriveWorks part!
Submitted 2017-12-03
By Brian
From undisclosed
The Moog idler arm was purchased (1 of 2 as a GMC Safari takes two) to replace the DriveWorks idler arm which was worn out after only 11 months of service. The Moog part appeared well made, the grease fitting actually threaded in with no problem and were accessible after installation, the bolts lined up, the tapered fit of the actual joint was proper sized and did not require spacers so the cotter key would work, etc. The Moog part is more than twice the cost of the 1 yr warranty DriveWorks part, but to be honest, who EVER wants suspension parts that wear out in less than a year unless you are selling the vehicle soon.
Bottom Line NULL
-
As expected, good quality from Moog
As expected, good quality from Moog
Submitted 2011-04-04
By BYM
From Chicago
Good fit and quality. Incs all necs hardware.
Bottom Line recommended
from $84.99
View Product -
Driveworks - Idler Arm (Part No. DW-K6365T)
DescriptionDriveworks Brand idler arms help to restore vibration-free driving and prevent tire wear. Driveworks Brand chassis parts promote improved steering response and durability.
Product Features:- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
Read 3 review(s)Review snapshot ® by PowerReviews
-
got me trou state inspection
got me trou state inspection
Submitted 2020-03-04
By Timothy
From Undisclosed
not as eavy as oem
Bottom Line NULL
-
I would buy the item again, I like the Moog brand but not at
I would buy the item again, I like the Moog brand but not at
Submitted 2020-02-04
By Gary
From Undisclosed
2000 Astro. Good product, value and fit. Concerned about the grease boot in keeping the water and dirt out of the ball joint.
Bottom Line NULL
-
Not quite an OEM fit..
Not quite an OEM fit..
Submitted 2016-12-06
By Brian
From Portage, Indiana
Lots of extra work to accommodate the cheapen in of the design.
Bottom Line not recommended
from $58.99
View Product -
Driveworks - Idler Arm (Part No. DW-K6366T)
DescriptionDriveworks Brand idler arms help to restore vibration-free driving and prevent tire wear. Driveworks Brand chassis parts promote improved steering response and durability.
Product Features:- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
Read 3 review(s)Review snapshot ® by PowerReviews
-
got me through state inspection
got me through state inspection
Submitted 2020-03-04
By Timothy
From Undisclosed
not as heavy as oem
Bottom Line NULL
-
I would buy the product again. I like the Moog brand, but no
I would buy the product again. I like the Moog brand, but no
Submitted 2020-02-04
By Gary
From Undisclosed
Used on 2000Astro. Item was a good fit and good value. however concerned about the weather rubber boot that protect the ball joints from the weather. The boots are loose fitting and water and road dirt can easily get in the ball joints. Also the grease fitting are in a difficult position.
Bottom Line NULL
-
DOES NOT FIT A 98 GMC SAFARI AT ALL, DON'T WASTE YOUR TIME!
DOES NOT FIT A 98 GMC SAFARI AT ALL, DON'T WASTE YOUR TIME!
Submitted 2018-10-04
By A knowledgeable mechanic
From Marietta, GA
The hump on the back of the part that bolts to the frame won't allow it to bolt up flush to the frame. The threaded stud that goes into the drag link is too small in diameter thus allowing too much of the stud to protrude through, which lets the castle nut thread too far up and makes the cotter pin hole useless because the nut is well above the hole!
Bottom Line not recommended
from $58.99
View Product -
Driveworks - Idler Arm (Part No. DW-K6392T)
DescriptionDriveworks Brand idler arms help to restore vibration-free driving and prevent tire wear. Driveworks Brand chassis parts promote improved steering response and durability.
Product Features:- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
Read 3 review(s)Review snapshot ® by PowerReviews
-
I will let you know.
I will let you know.
Submitted 2020-05-22
By Dean
From Undisclosed
I have owned 5 Chevy Astros since 1995. Four were used as delivery vehicles with 215,00 to 464,00 miles. I no longer own delivery co, I still have and drive 2 Astros. I believe the idler arms must take the brunt of punishment of the steering system as I never had to replace tie rods, ball joints, etc. At every tire change I was told the idlers were bad and couldn't align the front end until I put the best Moog arms from Advance, of course. They were replaced under warranty once. Moog wasn't available at my store. I decided to use your cheapest arms. I will let you know how they hold up. They (r&l) were in different boxes .The drivers side arm had no grease zirk on the top. These appear to be adjustable and seem sturdy for being half the price of the premium Moog arms. I have always installed them myself I think about 8 times. If these hold up , I will put them on my other Astro. Thanks for the good price.
Bottom Line NULL
-
I will keep buying more products from advance auto parts.
I will keep buying more products from advance auto parts.
Submitted 2020-04-03
By Jose
From Undisclosed
this product fit perfectly with my car.
Bottom Line NULL
-
different in design.
different in design.
Submitted 2017-09-24
By Charles
From undisclosed
Purchased two idler arms both fit both same part numbers both totally different designs. Already took the old one's off kind of stuck had to use em.
Bottom Line NULL
from $39.99
View Product -
ACDelco - Professional Idler Arm (Part No. M3020591742ACD)
DescriptionACDelco Advantage Idler Arms feature a precision-machined arm, housing, and socket end to ensure fit and function. The heavy-duty conical coil spring and cold-formed, heat-treated T-stud deliver the performance, while the hot-forged arm and bracket provide the strength you would expect from ACDelco.
Product Features:- Original Equipment Quality
- Precision-machined arm, housing, and socket
- Heavy-duty conical coil spring
- Heat-treated T-stud
from $132.69
View Product -
TRW - TRW Idler Arm (Part No. M3020211609TRW)
DescriptionTRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Idler Arm is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.
Product Features:- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
from $128.50
View Product -
TRW - TRW Idler Arm (Part No. M3020204424TRW)
DescriptionTRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Idler Arm is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.
Product Features:- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
from $126.20
View Product -
ACDelco - Professional Idler Arm (Part No. M3020591739ACD)
DescriptionACDelco Advantage Idler Arms feature a precision-machined arm, housing, and socket end to ensure fit and function. The heavy-duty conical coil spring and cold-formed, heat-treated T-stud deliver the performance, while the hot-forged arm and bracket provide the strength you would expect from ACDelco.
Product Features:- Original Equipment Quality
- Precision-machined arm, housing, and socket
- Heavy-duty conical coil spring
- Heat-treated T-stud
from $113.44
View Product -
ACDelco - Professional Idler Arm (Part No. M3020591740ACD)
DescriptionACDelco Advantage Idler Arms feature a precision-machined arm, housing, and socket end to ensure fit and function. The heavy-duty conical coil spring and cold-formed, heat-treated T-stud deliver the performance, while the hot-forged arm and bracket provide the strength you would expect from ACDelco.
Product Features:- Original Equipment Quality
- Precision-machined arm, housing, and socket
- Heavy-duty conical coil spring
- Heat-treated T-stud
from $112.38
View Product -
First Equipment Quality - FEQ Idler Arm (Part No. M3020204425FEQ)
DescriptionThe FEQ Idler Arm meets OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. The FEQ idler arm is manufactured to exacting OE tolerances for a proper fit and function.
Product Features:- Original Equipment quality
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
from $83.98
View Product -
Rare Parts - Idler Arm (Part No. RP20815)
DescriptionThis high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:- Improves steering response
- Reduces wander
- Reduces vibration
- Reduces tire wear
from $79.99
View Product -
Rare Parts - Idler Arm (Part No. RP20747)
DescriptionThis high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:- Improves steering response
- Reduces wander
- Reduces vibration
- Reduces tire wear
from $72.99
View Product -
Rare Parts - Idler Arm (Part No. RP20748)
DescriptionThis high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:- Improves steering response
- Reduces wander
- Reduces vibration
- Reduces tire wear
from $72.99
View Product -
International Suspension Group - Idler Arm (Part No. M3020204425ISG)
from $70.12
View Product -
International Suspension Group - Idler Arm (Part No. M3020204424ISG)
from $52.82
View Product -
International Suspension Group - Idler Arm (Part No. M3020211609ISG)
from $52.77
View Product