2004 Ford Expedition Heater Hose
Your 2004 Ford Expedition might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Heater Hose product you desperately need.
We currently carry 9 Heater Hose products to choose from for your 2004 Ford Expedition, and our inventory prices range from as little as $15.99 up to $63.99.
On top of low prices, Advance Auto Parts offers 3 different trusted brands of Heater Hose products for the 2004 Ford Expedition. We only sell parts from trusted brands like Dayco so that you can find quality parts you can count on.
Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 9 reviews on our Heater Hose products for the 2004 Ford Expedition from previous customers.
Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Heater Hose stock in-person!
Heater Hose for Your 2004 Ford Expedition
Search through our amazing selection of Heater Hose products for your 2004 Ford Expedition to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.
-
Dorman - Engine Heater Hose Assembly (Part No. 626-517)
DescriptionThis replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:- Ideal replacement - this HVAC heater hose assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies
Read 3 review(s)Review snapshot ® by PowerReviews
-
Would buy again
Would buy again
Submitted 2021-10-21
By Desiree
From Undisclosed
Great
Bottom Line NULL
-
Didn't quote work.
Didn't quote work.
Submitted 2019-07-31
By Christina
From Undisclosed
This part looked almost exactly like the original part. One of the bends in this metal tubing just wasn't quite right though and there was minimal clearance for error since this ran over the engine but below the intake manifold. This part would never have fit on my '04 F-250 with 5.4L engine without some redneck engineering and a hacksaw, which is ultimately what got me running again.
Bottom Line NULL
-
No
No
Submitted 2017-12-18
By james
From undisclosed
Correct application Part won't fit . made in china part poorly made
Bottom Line NULL
from $43.49
View Product -
Dayco - Curved Radiator Hose (Part No. E72444)
DescriptionDayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges. This hose is also made with a protective sleeve that protects contact areas against abrasion and heat.
Product Features:- Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
- Made with a protective sleeve that protects contact areas against abrasion and heat
- Highly resistant to electro-chemical degradation this hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
from $27.99
View Product -
Dayco - Molded Heater Hose (Part No. 87654)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- Highly resistant to electro-chemical degradation this hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Made with a protective sleeve that protects contact areas against abrasion and heat
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
from $15.99
View Product -
Dorman - Engine Heater Hose Assembly (Part No. 626-567)
DescriptionThis replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:- Ideal replacement - this HVAC heater hose assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies
from $39.99
View Product -
Dayco - Molded Heater Hose (Part No. 87855)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
from $19.99
View Product -
Dayco - Curved Radiator Hose (Part No. C72696)
DescriptionDayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.
Product Features:- Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
- Meets SAE J20R4, Class D-1 requirements for improved service hose
- Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges
from $42.99
View Product -
Dayco - Molded Heater Hose (Part No. E87989)
DescriptionThis Dayco Molded Heater Hose branched assembly is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a quick connect end assembled onto the hose for fast, convenient installation. With this Dayco product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.
Product Features:- Made with a tough EPDM rubber compound this hose is made to resist the detrimental effects of heat, ozone and impacts from road debris
- This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Highly resistant to electro-chemical degradation and premature stress cracking of the tube
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
from $63.99
View Product -
Dayco - Molded Heater Hose (Part No. 87985)
DescriptionDayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.
Product Features:- Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
- Highly resistant to electro-chemical degradation this hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
- Made with a protective sleeve that protects contact areas against abrasion and heat
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
from $52.99
View Product -
Motorcraft - Heater Hose Set (Part No. R3031681256MTR)
from $47.44
View Product
FAQs for 2004 Ford Expedition Heater Hose Products
What are the most popular Heater Hose for the 2004 Ford Expedition?
With 3 brands you can trust, our most popular Heater Hose products for the 2004 Ford Expedition parts are: