2001 Ford Expedition Engine Oil Cooler Hose

Your 2001 Ford Expedition might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Engine Oil Cooler Hose product you desperately need.

We currently carry 2 Engine Oil Cooler Hose products to choose from for your 2001 Ford Expedition, and our inventory prices range from as little as $121.99 up to $164.99.

On top of low prices, Advance Auto Parts offers 1 different trusted brands of Engine Oil Cooler Hose products for the 2001 Ford Expedition. We only sell parts from trusted brands like Dorman - OE Solutions so that you can find quality parts you can count on.

Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 20 reviews on our Engine Oil Cooler Hose products for the 2001 Ford Expedition from previous customers.

Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Engine Oil Cooler Hose stock in-person!

Engine Oil Cooler Hose for Your 2001 Ford Expedition

Search through our amazing selection of Engine Oil Cooler Hose products for your 2001 Ford Expedition to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.

Dorman - OE Solutions - Engine Oil Cooler Line (Part No. 625-201)
Description
Designed to resist corrosion and leakage, Our Engine Oil Cooler Hose Assembly is made for lasting performance. Ensure the smooth transfer of oil from the engine to the cooler, and protect your engine.

Product Features:
Upgraded from steel and/or rubber construction to corrosion-resistant aluminum (where applicable)
Includes clips and gaskets (where applicable)
Direct replacement for trouble-free installation
Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

3.5

Read 3 review(s)

Review snapshot ® by PowerReviews

3.5

3.5

5

5

2020-02-23

5

5

Description of part wrong, remote oil filter hose correct.

Description of part wrong, remote oil filter hose correct.

Submitted 2020-02-23

By David

From Undisclosed

Product came just as shown in the photo. This is not the correct description for the products intended use. The part is used for the remote oil filter installed by Ford at the factory. Took a lot of double checking Dorman part numbers to make sure this part was correct.

Bottom Line NULL

Product came just as shown in the photo. This is not the correct description for the products intended use. The part is used for the remote oil filter installed by Ford at the factory. Took a lot of double checking Dorman part numbers to make sure this part was correct.

By David from Undisclosed

BOTTOM LINE NULL

3

3

2017-06-10

3

3

Nope

Nope

Submitted 2017-06-10

By Dean

From undisclosed

OK so far

Bottom Line NULL

OK so far

By Dean from undisclosed

BOTTOM LINE NULL

1

1

2014-12-04

1

1

Low Quality

Low Quality

Submitted 2014-12-04

By ssowens

From Lebanon, IN

Purchased this part online from advanced auto, easy purchase and delivery. Part looked good when I got it, installation took some effort but no real problems until I turned engine on to check for leaks. Leaked horribly! Finally took it back off to inspect closer, the aluminum end that went into oil filter housing had a nasty burr on it from manufacturing process that was hidden by o-ring (o-rings are junk too). Was in a jam, so had to grind the burr off and re-install, still leaked; doubled up on o-rings and it works. Poorly made, bad fit. Would like my money back, but not worth reinstallation.

Bottom Line not recommended

Purchased this part online from advanced auto, easy purchase and delivery. Part looked good when I got it, installation took some effort but no real problems until I turned engine on to check for leaks. Leaked horribly! Finally took it back off to inspect closer, the aluminum end that went into oil filter housing had a nasty burr on it from manufacturing process that was hidden by o-ring (o-rings are junk too). Was in a jam, so had to grind the burr off and re-install, still leaked; doubled up on o-rings and it works. Poorly made, bad fit. Would like my money back, but not worth reinstallation.

By ssowens from Lebanon, IN

BOTTOM LINE not recommended
from $164.99
View Product
Dorman - OE Solutions - Engine Oil Cooler Line (Part No. 625-202)
Description
Designed to resist corrosion and leakage, Our Engine Oil Cooler Hose Assembly is made for lasting performance. Ensure the smooth transfer of oil from the engine to the cooler, and protect your engine.

Product Features:
Upgraded from steel and/or rubber construction to corrosion-resistant aluminum (where applicable)
Includes clips and gaskets (where applicable)
Direct replacement for trouble-free installation
Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

3.5

Read 2 review(s)

Review snapshot ® by PowerReviews

3.5

3.5

2

2

2016-08-15

2

2

Fails every 2 years!

Fails every 2 years!

Submitted 2016-08-15

By Drummerboy

From Denver CO

This fails. Third one in 6 years. Better to get Ford OEM. But they did warranty it with replacement and was cheaper than Ford part.

Bottom Line not recommended

This fails. Third one in 6 years. Better to get Ford OEM. But they did warranty it with replacement and was cheaper than Ford part.

By Drummerboy from Denver CO

BOTTOM LINE not recommended

5

5

2013-02-01

5

5

Fits fine and works like it should

Fits fine and works like it should

Submitted 2013-02-01

By Tom

From Vegas!

These hoses match the factory hoses just fine. I had no problem with the part and it sealed up my oil leak as it should. The dealer charges $200 to $300 for installation so I figured it would take some time to install and it did. The hoses attach to the block on my 5.4 Expedition with just 2 bolts that are easy to reach with a socket wrench and extensions. The end that attaches to the filter mount are more challenging. There are 2 bolts to be removed from the filter bracket that are visible from the filter. Then there are 2 more bolts that need to be removed from the bracket that are accessed by reaching in the grill opening by the license plate. Then there is one sneaky bold that is on the back side of the bracket that needs to be loose in order for the old hose to disconnect from the oil filter bracket. Its not a hard job but takes more than 5 minutes. The fit of the hoses was perfect.

Bottom Line recommended

These hoses match the factory hoses just fine. I had no problem with the part and it sealed up my oil leak as it should. The dealer charges $200 to $300 for installation so I figured it would take some time to install and it did. The hoses attach to the block on my 5.4 Expedition with just 2 bolts that are easy to reach with a socket wrench and extensions. The end that attaches to the filter mount are more challenging. There are 2 bolts to be removed from the filter bracket that are visible from the filter. Then there are 2 more bolts that need to be removed from the bracket that are accessed by reaching in the grill opening by the license plate. Then there is one sneaky bold that is on the back side of the bracket that needs to be loose in order for the old hose to disconnect from the oil filter bracket. Its not a hard job but takes more than 5 minutes. The fit of the hoses was perfect.

By Tom from Vegas!

BOTTOM LINE recommended
from $121.99
View Product